Upload Button Icon Add office photos

MN Dastur & Company

Compare button icon Compare button icon Compare

Filter interviews by

MN Dastur & Company Electrical Engineer Interview Questions and Answers

Updated 29 Aug 2024

MN Dastur & Company Electrical Engineer Interview Experiences

1 interview found

Interview experience
5
Excellent
Difficulty level
Easy
Process Duration
2-4 weeks
Result
Selected Selected
Round 1 - Aptitude Test 

Apti,core subject in engineering

Round 2 - Technical 

(1 Question)

  • Q1. Basic HR ques,Core sub,project , vocational training

Interview questions from similar companies

Interview Questionnaire 

4 Questions

  • Q1. Cable tray
  • Q2. HT motors
  • Q3. Air blast circuit breakers
  • Q4. VFD

I applied via Referral and was interviewed before May 2021. There were 3 interview rounds.

Round 1 - Technical 

(1 Question)

  • Q1. Genaral questions about pas work experience
Round 2 - One-on-one 

(1 Question)

  • Q1. Questions related to work were asked and personal family details were also asked
Round 3 - HR 

(1 Question)

  • Q1. About compensation and time of joining only

Interview Preparation Tips

Interview preparation tips for other job seekers - Be prepared about your past work experience related process & technical questions
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
4-6 weeks
Result
Selected Selected

I applied via Company Website and was interviewed in Apr 2023. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Be truthful in your resume. It is very easy to catch false or lies during the interview by asking basic questions.
View all tips
Round 2 - Technical 

(4 Questions)

  • Q1. Pellet plant maintenance work
  • Q2. Pellet plant working procedure
  • Ans. 

    Pellet plant is a facility that transforms raw materials into pellets through a series of processes like grinding, drying, and compressing.

    • Raw materials such as wood chips or sawdust are fed into the plant

    • The raw materials are ground into a fine powder

    • The powder is then dried to remove moisture

    • The dried powder is compressed into pellets using a pellet press

    • The pellets are cooled and screened to ensure quality

    • The final ...

  • Answered by AI
  • Q3. Cooler car plate replacement work
  • Ans. 

    Replacing cooler car plates involves removing old plates, cleaning the area, and installing new plates securely.

    • Remove old cooler car plates carefully to avoid damaging surrounding components

    • Clean the area thoroughly before installing new plates to ensure proper adhesion

    • Securely install new cooler car plates to prevent any leaks or malfunctions

  • Answered by AI
  • Q4. Kil girth gear reverse process
  • Ans. 

    The reverse process of kiln girth gear involves disassembling, inspecting, repairing, and reassembling the gear to ensure proper functioning.

    • Disassemble the girth gear carefully to inspect for any damage or wear

    • Repair or replace any worn or damaged components

    • Reassemble the gear ensuring proper alignment and torque specifications

    • Perform testing to ensure the gear functions correctly after reassembly

  • Answered by AI
Interview experience
4
Good
Difficulty level
Hard
Process Duration
6-8 weeks
Result
Selected Selected

I applied via Naukri.com and was interviewed in Nov 2022. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Don’t add your photo or details such as gender, age, and address in your resume. These details do not add any value.
View all tips
Round 2 - Technical 

(2 Questions)

  • Q1. Filed related questions
  • Q2. Past experience and future planning
Round 3 - HR 

(1 Question)

  • Q1. Last plant salary

I applied via Referral and was interviewed in Mar 2022. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(1 Question)

  • Q1. Ask about technical project done during my b.tech
Round 3 - HR 

(3 Questions)

  • Q1. Why should we hire you?
  • Ans. 

    I have extensive experience in senior engineering roles and a proven track record of delivering high-quality results.

    • I have a deep understanding of complex engineering concepts and can apply them effectively in real-world scenarios.

    • I have successfully led and managed teams, ensuring efficient collaboration and achieving project goals.

    • I consistently stay updated with the latest industry trends and technologies, allowing...

  • Answered by AI
  • Q2. Why are you looking for a change?
  • Ans. 

    Seeking new challenges and growth opportunities in a different organization.

    • Looking for a more challenging role

    • Seeking professional growth and development

    • Interested in exploring new technologies and industries

    • Want to work in a different organizational culture

    • Seeking better work-life balance

  • Answered by AI
  • Q3. Share details of your previous job.
  • Ans. 

    I worked as a Senior Engineer at XYZ Company.

    • Led a team of engineers in developing and implementing new software solutions.

    • Collaborated with cross-functional teams to ensure project success.

    • Designed and implemented scalable and efficient code.

    • Performed code reviews and provided technical guidance to junior engineers.

    • Successfully delivered multiple projects on time and within budget.

    • Implemented best practices and optimi...

  • Answered by AI

Interview Preparation Tips

Topics to prepare for Jindal Aluminium Senior Engineer interview:
  • Technical Skills
  • Analytical skills
  • Root Cause
  • Presentation Skills
Interview preparation tips for other job seekers - It's best platform for everyone who wants to learn.
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I appeared for an interview before Mar 2024, where I was asked the following questions.

  • Q1. Explain about transformer and its components
  • Q2. Explain about photovoltaic cell
  • Q3. Explain about inverters
  • Q4. Which electrical components are placed in grid substation

Interview Preparation Tips

Interview preparation tips for other job seekers - Overall good

I applied via Approached by Company and was interviewed in Jul 2022. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(2 Questions)

  • Q1. I am working from Grid sub station . Transformer... CT PT CVT EARTHING PTW
  • Q2. All about 132 kv Gss

Interview Preparation Tips

Interview preparation tips for other job seekers - Dear sir ,
I am Diploma Holder in Electrical Engineer
With Experience in 132kv Gss in 6.5 years.
Currently in adani Transmission last 4.3 years.
I am working from scada operating system.

I applied via Newspaper Ad and was interviewed before Apr 2021. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Group Discussion 

Hard work versus smart work.

Round 3 - Technical 

(3 Questions)

  • Q1. Why power plug earth wire is bigger in size?
  • Ans. 

    The power plug earth wire is bigger in size to ensure safety and prevent electrical shocks.

    • The earth wire provides a path for the current to flow in case of a fault or short circuit.

    • A larger wire size reduces resistance and allows for the safe dissipation of excess current.

    • It helps to protect individuals and equipment from electric shock hazards.

    • The earth wire is connected to the ground, which acts as a reference point...

  • Answered by AI
  • Q2. Which conductor of same size will take larger current Al or Cu?
  • Ans. 

    Copper (Cu) conductor will take larger current than Aluminum (Al) conductor of the same size.

    • Copper has a higher electrical conductivity than Aluminum.

    • Copper has a lower resistivity than Aluminum.

    • Copper has better thermal conductivity than Aluminum.

    • Copper is more commonly used in high-current applications.

    • Aluminum is often used in overhead power transmission lines due to its lighter weight.

  • Answered by AI
  • Q3. What is pulse width modulation in VFD?
  • Ans. 

    Pulse width modulation (PWM) is a technique used in VFD to control the speed of the motor by adjusting the width of the pulses of voltage supplied to the motor.

    • PWM is a method of controlling the amount of power delivered to a load without changing the voltage level.

    • In VFD, PWM is used to control the speed of the motor by varying the width of the pulses of voltage supplied to the motor.

    • The width of the pulses is control...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Basic knowledge of your engineering subject should be good for clearing any interview.
Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(1 Question)

  • Q1. Dol and star delta wiring scheme
  • Ans. 

    DOL (Direct-On-Line) and star delta are two different wiring schemes used in electrical engineering for starting induction motors.

    • DOL wiring directly connects the motor to the power supply for starting, while star delta wiring initially starts the motor in star configuration and then switches to delta configuration for running.

    • DOL wiring is simpler and cheaper but causes high starting current, while star delta wiring r...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Be confident

MN Dastur & Company Interview FAQs

How many rounds are there in MN Dastur & Company Electrical Engineer interview?
MN Dastur & Company interview process usually has 2 rounds. The most common rounds in the MN Dastur & Company interview process are Aptitude Test and Technical.

Tell us how to improve this page.

MN Dastur & Company Electrical Engineer Interview Process

based on 1 interview

Interview experience

5
  
Excellent
View more

Interview Questions from Similar Companies

Metso Interview Questions
4.2
 • 66 Interviews
Hindustan Zinc Interview Questions
3.8
 • 43 Interviews
Mecon Interview Questions
3.9
 • 43 Interviews
MSPL Interview Questions
4.1
 • 24 Interviews
View all
MN Dastur & Company Electrical Engineer Salary
based on 15 salaries
₹4 L/yr - ₹5.2 L/yr
10% more than the average Electrical Engineer Salary in India
View more details

MN Dastur & Company Electrical Engineer Reviews and Ratings

based on 5 reviews

2.4/5

Rating in categories

2.5

Skill development

2.5

Work-life balance

2.6

Salary

2.4

Job security

3.0

Company culture

2.0

Promotions

2.1

Work satisfaction

Explore 5 Reviews and Ratings
Principal Engineer
61 salaries
unlock blur

₹8 L/yr - ₹13.6 L/yr

Lead Engineer
41 salaries
unlock blur

₹6.3 L/yr - ₹13.9 L/yr

Deputy Chief Engineer
38 salaries
unlock blur

₹7.5 L/yr - ₹14.8 L/yr

Senior Engineer
32 salaries
unlock blur

₹4.2 L/yr - ₹14 L/yr

Superintending Engineer
24 salaries
unlock blur

₹7 L/yr - ₹10 L/yr

Explore more salaries
Compare MN Dastur & Company with

Hindustan Zinc

3.8
Compare

Vedanta Resources

3.7
Compare

Carborundum Universal Limited

3.9
Compare

Metso

4.2
Compare
Did you find this page helpful?
Yes No
write
Share an Interview