MESCO Steel Interview Questions and Answers

This was a multiple-choice exam, and the questions were related to English, mathematics, and reasoning.

Q1. Technical questions related to paints chemistry
Add your answer
Q2. What are pigments and what are the types of pigments and what are resins
Add your answer
Q3. What is capillary action and what is PH value
Add your answer

Q1. This was with regional manager
Add your answer

Q1. What should be done if the air conditioning unit is not cooling and water is overflowing?
Ans. 
Check for clogged air filters, condensate drain line, and refrigerant levels. Call a professional if needed.
• Check air filters for clogs and replace if necessary

• Inspect condensate drain line for blockages and clear if needed

• Check refrigerant levels and call a professional if low

• Ensure the thermostat is set correctly and the unit is not overheating
Answered by AI
Add your answer
Q2. Ac wire lose
Ans. 
Ac wire feet protectly
Answered by Surya Kushwaha
Add your answer
Q3. Ac gas lik Ac gas use
Ans. 
AC gas is used in air conditioning systems to cool the air inside a building or vehicle.
• AC gas is a refrigerant that absorbs heat from the air inside the system and releases it outside.

• Common AC gases include R-410A, R-22, and R-134a.

• AC gas leaks can lead to decreased cooling efficiency and potential harm to the environment.

• Regular maintenance and proper handling of AC gas are important for optimal performance.
Answered by AI
View 1 more answer

Q1. Ac feet ac change ac repair Ac gas lok
Add your answer
Q2. Ac service
Add your answer

Q1. Ac gas use ac feet
Ans. 
The question is unclear and seems to be asking about the usage of AC gas in terms of feet.
• AC gas is typically measured in pounds or kilograms, not feet.

• The amount of AC gas used depends on the size of the AC unit and any leaks in the system.

• It is important to have a professional technician handle AC gas refills to prevent damage to the unit.

• Regular maintenance of the AC unit can help prevent leaks and reduce the need f
Answered by AI
Add your answer
Q2. Ac gas use
Ans. 
AC gas is used to cool the air in air conditioning systems.
• AC gas is a refrigerant used in air conditioning systems to absorb and release heat.

• Common types of AC gas include R-410A, R-22, and R-134a.

• AC gas should only be handled by trained technicians to prevent leaks and environmental damage.
Answered by AI
Add your answer

Q1. Ac feet ac gas use
Ans. 
The question is asking about the use of AC gas in air conditioning units.
• AC gas is used in air conditioning units to cool the air that is circulated throughout a building.

• The amount of AC gas used depends on the size of the unit and the frequency of use.

• Regular maintenance of AC units can help ensure efficient use of AC gas.
Answered by AI
Add your answer
Q2. Ac change ac repair
Add your answer

Q1. Ac feet ac gas use
Ans. 
The question is asking about the use of AC gas in air conditioning units.
• AC gas is used in air conditioning units to cool the air that is circulated throughout a building.

• The amount of AC gas used depends on the size of the unit and the frequency of use.

• Regular maintenance of AC units can help ensure efficient use of AC gas.
Answered by AI
Add your answer
Q2. Ac service ac change
Add your answer

Q1. Ac repair ac gas use
Ans. 
AC repair involves checking and refilling AC gas to ensure proper functioning.
• AC repair technicians check for leaks in the AC system before refilling gas.

• The type of gas used depends on the specific AC unit and its requirements.

• Properly refilling AC gas can improve cooling efficiency and extend the lifespan of the unit.
Answered by AI
Add your answer
Q2. Ac frrt
Add your answer

Any hou I will do sir

I can do work in company

Any how i do work in company maruti suzuki

Study and read polectly riting good also

I am do work profectly

I do work hardly I am do all work so I do work

Study and read writing

Nice good night friends

I am mechanical so do gime work ac technician any problem sir

Group discussion is a very important tool in addressing various problems.

Q1. What is the count of different types of vernier calipers?
Add your answer
Q2. What is the count of measurements in micrometers?
Add your answer
Q3. QQC Information About the world
Add your answer

Q1. What the Quality
Add your answer
Q2. What are the steps involved in Quality Control (QQC)?
Add your answer

Q1. Self introduction
Add your answer
Q2. What is pH?
Ans. 
pH is a measure of the acidity or alkalinity of a solution on a scale of 0 to 14.
• pH stands for 'potential of Hydrogen'

• It measures the concentration of hydrogen ions in a solution

• A pH of 7 is considered neutral, below 7 is acidic, and above 7 is alkaline

• Examples: Lemon juice has a pH of around 2, while baking soda has a pH of around 9
Answered by AI
Add your answer
Q3. What is ultraviolet (UV) spectroscopy, and how does it work?
Ans. 
UV spectroscopy is a technique used to analyze the absorption and transmission of ultraviolet light by a sample.
• UV spectroscopy involves measuring the absorbance of ultraviolet light by a sample.

• It works based on the principle that molecules absorb UV light at specific wavelengths.

• The amount of absorption is proportional to the concentration of the absorbing species in the sample.

• UV spectroscopy is commonly used in pha...read more
Answered by AI
Add your answer
Q4. What is UV?
Ans. 
UV stands for ultraviolet, a type of electromagnetic radiation with a wavelength shorter than that of visible light.
• UV radiation is commonly emitted by the sun and can cause damage to skin and eyes.

• UV radiation is categorized into UVA, UVB, and UVC based on wavelength.

• UV light is used in various applications such as sterilization, tanning beds, and counterfeit detection.
Answered by AI
Add your answer
Q5. What is fingerprint region?
Ans. 
Fingerprint region refers to a specific range of frequencies in an infrared spectrum that is unique to a particular molecule.
• Fingerprint region is typically between 1500-500 cm^-1 in an IR spectrum.

• It is used for identifying functional groups in organic molecules.

• Each molecule has a unique fingerprint region due to its unique molecular structure.
Answered by AI
Add your answer
Q6. Tell me a range of UV spectroscopy
Ans. 
UV spectroscopy measures the absorption of ultraviolet (UV) light by a sample.
• UV spectroscopy is used to analyze the electronic transitions in molecules.

• It is commonly used in pharmaceuticals, environmental monitoring, and material science.

• UV spectroscopy typically ranges from 190 to 400 nm.

• The Beer-Lambert law is often applied in UV spectroscopy to quantify the concentration of a sample.

• UV spectroscopy can be used to ...read more
Answered by AI
Add your answer

Q1. Can you provide a self-introduction?
Ans. 
I am a detail-oriented Quality Controller with a strong background in ensuring product quality and compliance.
• Experienced in conducting quality inspections and audits

• Skilled in identifying and resolving quality issues

• Proficient in implementing quality control procedures

• Strong attention to detail and accuracy

• Excellent communication and problem-solving skills
Answered by AI
Add your answer
Q2. Are you proficient in the Hindi language?
Ans. 
Yes, I am proficient in the Hindi language.
• Fluent in speaking, reading, and writing Hindi

• Can effectively communicate with Hindi-speaking team members

• Have experience in translating documents from Hindi to English

• Comfortable with using Hindi terminology in quality control processes
Answered by AI
Add your answer
Q3. Can you discuss the projects you completed during your college studies?
Ans. 
During my college studies, I completed several projects related to quality control in manufacturing processes.
• Developed a quality control plan for a manufacturing company to ensure product consistency and compliance with industry standards

• Conducted statistical analysis on production data to identify areas for improvement and reduce defects

• Implemented Six Sigma methodologies to optimize processes and minimize waste

• Colla...read more
Answered by AI
Add your answer
Q4. Why cipla?
Add your answer
Q5. Tell me about your education
Ans. 
I have a Bachelor's degree in Quality Management from XYZ University.
• Bachelor's degree in Quality Management

• Specialized coursework in quality control techniques

• Hands-on experience with quality control processes

• Continuous learning and professional development in the field
Answered by AI
Add your answer
Q6. Tell me about your family
Ans. 
I come from a close-knit family of five, including my parents, my older sister, and my younger brother.
• I have a supportive and loving family who have always encouraged me to pursue my goals.

• We enjoy spending quality time together, whether it's going on family vacations or simply having dinner at home.

• My parents have been a great source of inspiration for me, instilling values of hard work and dedication.

• My siblings and...read more
Answered by AI
Add your answer

Q1. What has been your experience as an electrical engineer working in a supervisory role?
Add your answer
Q2. I am always done my work on time
Add your answer
Q3. My work is always finishing and facing work
Add your answer
Q4. I am all electrical work complete done
Add your answer

Diploma mechanical engineering 2022

Q1. Apne baare me batwo 5 loose point 5 strength.
Add your answer
Q2. Women empowerment se kya samajhte hai.
Add your answer
Q3. Technical knowledge kitna hai tumhe.
Add your answer
Q4. Aapke subjects are hobby ke baare main batao.
Add your answer

Q1. Metallurgy engineering related.
Add your answer
Q2. Steel making shop operating related.
Add your answer
Q3. EAF Operation related.
Add your answer

Sale & marketing experience & behaviour for better growth for organizational growth.

Q1. What is your experience conclusion
Add your answer
Q2. What should be campaign for next step in sales & marketing field for organizational growth
Add your answer
Q3. Employee growth structure
Add your answer
Q4. Salary structure
Add your answer

Q1. Fundamental use of technology
Add your answer
Q2. How to update fundamental technology in your work
Add your answer