i
Mersen
Filter interviews by
I applied via Recruitment Consulltant and was interviewed before Sep 2021. There were 3 interview rounds.
Direct on line starter diagram is a simple starting method for electric motors.
The diagram consists of a power supply, a contactor, and an overload relay.
The contactor connects the motor to the power supply when it is energized.
The overload relay protects the motor from overheating by tripping the circuit if the current exceeds a certain level.
The diagram is commonly used for small to medium-sized motors.
It is not suit...
Star delta starter is used to reduce the starting current of induction motors.
Consists of three contactors and a timer
During starting, motor is connected in star configuration to reduce current
After a set time, contactors switch to delta configuration for normal operation
Fluorescent lamp connection involves a ballast, starter, and two pins on each end of the lamp.
The ballast regulates the current and voltage to the lamp.
The starter provides a high voltage to initiate the lamp's arc.
The two pins on each end of the lamp connect to the lamp holder.
The lamp holder provides power to the lamp and holds it in place.
The wiring should be done according to the manufacturer's instructions.
Ohm's law states that the current through a conductor between two points is directly proportional to the voltage across the two points.
Ohm's law is represented by the equation I = V/R, where I is the current, V is the voltage, and R is the resistance.
It is named after Georg Simon Ohm, a German physicist who first formulated this law.
This law is applicable to all types of circuits, including AC and DC circuits.
It is use...
I applied via Walk-in and was interviewed before Feb 2022. There were 3 interview rounds.
I applied via Naukri.com and was interviewed in Feb 2024. There were 3 interview rounds.
Face interview when it will be there??
posted on 15 Mar 2025
I appeared for an interview before Mar 2024, where I was asked the following questions.
I applied via Naukri.com
I applied via Recruitment Consultant and was interviewed in Apr 2021. There were 4 interview rounds.
I appeared for an interview in Dec 2020.
Round duration - 70 Minutes
Round difficulty - Medium
There were 5 people in the zoom meet, including me. Rest all 4 were interviewers, 3 from India and 1 from the United Kingdom.
They started with my introduction and then moved on to the questions from my resume, starting with my internship at Samsung Bangalore and then projects.
Then another interviewer asked about my weakness and strength. Then comes the turn of coding questions.
Starting with finding the minimum element in O(1) time, rotating the 2-D array by 90 degrees, OOPS questions were also asked like- polymorphism, abstraction, virtual class. Some OS questions were- cache, paging algorithms.
Then come my POR and other activities.
You are provided with an array of integers ARR
of size N
and an integer K
. Your task is to find and return the K
-th smallest value present in the array. All elements...
Find the K-th smallest element in an array of distinct integers.
Sort the array and return the element at index K-1.
Use a min-heap to find the K-th smallest element efficiently.
Implement quickselect algorithm for optimal performance.
You are provided with a square matrix of non-negative integers of size 'N x N'
. The task is to rotate this matrix by 90 degrees in an anti-clockwise directi...
Rotate a square matrix by 90 degrees anti-clockwise without using extra space.
Iterate through each layer of the matrix from outer to inner layers
Swap elements in groups of 4 to rotate the matrix in place
Handle odd-sized matrices separately by adjusting the loop boundaries
Page replacement algorithms are used in operating systems to decide which page to replace when a new page needs to be brought in.
FIFO (First In, First Out) - replaces the oldest page in memory
LRU (Least Recently Used) - replaces the page that has not been used for the longest time
LFU (Least Frequently Used) - replaces the page that has been used the least number of times
Optimal - replaces the page that will not be used
Tip 1 : Practice GFG Must Do section, solve at least 5 Questions daily
Tip 2 : Start talking to new people regarding technology to remove hesitation at the time of the interview.
Tip 3 : Be in contact with a senior already working in that company, ask them regarding previous experience and new project the company is working on.
Tip 4 : Once you are done with GFG must do questions, now complete leetcode sorting by your target company.
Tip 5 : For core subjects refer to gate smashers and knowledge gate videos on youtube.
Tip 1 : Try to modify your resume according to the company you are applying for, for this read their Job Description provided to you.
Tip 2 : Mention no more than 3 projects and 1,2 internships.
Tip 3 : Divide your skills into beginner, intermediate and hard sections, otherwise don't mention too many skills.
Tip 4 : Don't mention to many Position Of Responsibilities( at max 2-3).
I applied via LinkedIn and was interviewed in Sep 2021. There was 1 interview round.
based on 1 review
Rating in categories
Production Engineer
17
salaries
| ₹3.2 L/yr - ₹6.2 L/yr |
Quality Engineer
14
salaries
| ₹3 L/yr - ₹5.6 L/yr |
Assistant Manager
10
salaries
| ₹8 L/yr - ₹12.5 L/yr |
Store Associate
8
salaries
| ₹3.1 L/yr - ₹4.2 L/yr |
CAM Engineer
8
salaries
| ₹3.6 L/yr - ₹5.5 L/yr |
Dhoot Transmission
Amphenol Interconnect
Saud Bahwan Group
Toyoda Gosei Minda