i
Medhaj Techno Concept
Filter interviews by
The main element of any structure is its foundation.
The foundation provides stability and support for the entire structure
It distributes the weight of the structure evenly
Examples include concrete footings, pilings, and slabs
Development length of Welded Rod is the length of the embedded portion of the rod required to develop the full strength of the rod.
Development length is influenced by factors such as diameter of the rod, type of material, and type of welding process used.
It is important to calculate the development length accurately to ensure the structural integrity of the welded rod.
Examples of factors affecting development length in...
I will manage the work by setting clear goals, delegating tasks effectively, monitoring progress, and providing support to team members.
Set clear goals and objectives for the project
Delegate tasks based on team members' strengths and expertise
Monitor progress regularly and adjust plans as needed
Provide support and guidance to team members to ensure successful completion of tasks
Design factor of steel refers to the safety factor used in structural design to account for uncertainties and variations in material properties.
Design factor is typically a value greater than 1 to ensure the structure can safely support the intended loads.
Common design factors for steel structures range from 1.5 to 2.5, depending on the level of risk and safety required.
Factors such as material quality, fabrication pro...
Nodes in Stadd Pro are points where structural members meet or intersect.
Nodes are used to define the geometry of the structure.
Nodes are connected by members to form the structural system.
Nodes can have different properties assigned to them such as supports or loads.
Examples of nodes include column bases, beam ends, and connection points.
Yes, I am proficient in MS Excel and have experience using it for data analysis and project management tasks.
Proficient in creating and managing spreadsheets
Experience with data analysis and visualization
Used Excel for project management tasks such as tracking progress and creating Gantt charts
I will be joining the team on June 1st, 2022.
I have accepted the offer and will start on the agreed upon date.
I am excited to join the team and contribute to the project.
I have already informed my current employer about my resignation.
I am in the process of wrapping up my current projects to ensure a smooth transition.
Top trending discussions
I applied via Referral and was interviewed in Jul 2023. There were 2 interview rounds.
I appeared for an interview in Mar 2023, where I was asked the following questions.
In my previous role as a Project Engineer, I managed engineering projects from conception to completion, ensuring timely delivery and quality.
Led a team of engineers to design and implement a new manufacturing process, resulting in a 20% increase in efficiency.
Coordinated with cross-functional teams to ensure project milestones were met, improving communication and collaboration.
Conducted risk assessments and developed...
Understanding crane lifting capacity is crucial for safe and efficient project execution.
Crane capacity is determined by the type of crane and its configuration.
For example, a tower crane can lift heavier loads than a mobile crane due to its fixed base.
The lifting capacity decreases as the radius increases; for instance, a crane may lift 10 tons at 10 meters but only 5 tons at 20 meters.
Load charts provided by manufact...
Effective interaction and movement of major components ensure project success and efficiency in engineering tasks.
Understand the specifications of each component to ensure compatibility.
Utilize CAD software for precise modeling and visualization of component interactions.
Implement a systematic approach for assembly, such as following a step-by-step guide.
Conduct regular checks and tests during the movement phase to ide...
Erection requirements involve planning, safety measures, and coordination for successful project execution.
Site Preparation: Ensure the site is cleared and ready for equipment and materials.
Safety Protocols: Implement safety measures like PPE and hazard assessments.
Equipment Availability: Confirm that all necessary tools and machinery are on-site.
Skilled Workforce: Ensure that qualified personnel are available for the ...
Tensioning and torquing tools ensure proper fastening and load distribution in engineering projects.
Torque Wrench: Used to apply a specific torque to fasteners, ensuring they are tightened to the correct specification.
Tensioning Tool: Devices like hydraulic tensioners that apply a precise amount of tension to bolts, often used in large structures.
Torque Angle Gauge: Measures the angle of rotation after a fastener has b...
MCC (Motor Control Center) work process involves design, installation, and maintenance of electrical control systems for motors.
Design: Create layout and specifications for the MCC based on project requirements.
Installation: Assemble and install MCC components like circuit breakers, contactors, and control panels.
Testing: Conduct functional tests to ensure all components operate correctly and safely.
Maintenance: Regula...
MCC closing involves safely shutting down a Motor Control Center, ensuring equipment and personnel safety.
1. Ensure all equipment is in a safe state before closing the MCC.
2. Notify all personnel involved in the operation about the MCC closure.
3. Follow lockout/tagout (LOTO) procedures to prevent accidental re-energization.
4. Gradually reduce load on the MCC by shutting down connected equipment.
5. Monitor voltage and c...
Implementing strict protocols and training can prevent tool mishandling and ensure safety on site.
Conduct regular training sessions on proper tool handling and safety protocols.
Implement a tool tracking system to monitor the usage and location of tools.
Establish a designated storage area for tools and components to prevent loss and damage.
Use color-coded tags or labels to identify tools and their designated users.
Condu...
Implementing preventive measures and regular maintenance can effectively control tool damage in engineering projects.
Conduct regular inspections to identify wear and tear, e.g., checking drill bits for dullness.
Implement proper storage solutions to prevent accidental damage, such as using toolboxes or racks.
Train staff on correct usage techniques to minimize misuse, e.g., demonstrating proper handling of power tools.
Es...
Pre-com is the process of preparing and organizing project components before execution.
Define project scope and objectives clearly.
Gather and analyze all necessary data and resources.
Develop a detailed project plan with timelines.
Identify and allocate roles and responsibilities among team members.
Conduct risk assessments and develop mitigation strategies.
A post-com plan outlines the steps for project completion and site handover, ensuring all tasks are finalized efficiently.
Conduct a final site inspection to ensure all work meets quality standards.
Compile and submit all necessary documentation, including as-built drawings and warranties.
Organize a handover meeting with stakeholders to discuss project outcomes and address any concerns.
Ensure all safety measures are revi...
I applied via Naukri.com and was interviewed in May 2023. There were 4 interview rounds.
I appeared for an interview in Jul 2020.
I applied via Naukri.com and was interviewed in Jun 2021. There were 3 interview rounds.
I applied via LinkedIn and was interviewed before Mar 2022. There were 3 interview rounds.
I applied via Naukri.com and was interviewed in Nov 2021. There was 1 interview round.
I applied via Naukri.com and was interviewed before Dec 2022. There were 4 interview rounds.
I appeared for an interview in Jan 2025.
Managing a team involves effective communication, setting clear goals, providing support, and fostering a positive work environment.
Communicate clearly and regularly with team members to ensure everyone is on the same page
Set specific, achievable goals for the team and individuals, and provide feedback on progress
Support team members by offering guidance, resources, and training as needed
Create a positive work environm...
based on 2 interviews
Interview experience
based on 9 reviews
Rating in categories
Senior Engineer
184
salaries
| ₹2.3 L/yr - ₹7.6 L/yr |
Deputy Manager
150
salaries
| ₹3.1 L/yr - ₹9.6 L/yr |
Field Engineer
135
salaries
| ₹1.5 L/yr - ₹4.5 L/yr |
Electrical Engineer
131
salaries
| ₹1.4 L/yr - ₹4 L/yr |
Site Engineer
101
salaries
| ₹1.5 L/yr - ₹4 L/yr |
Bureau Veritas
SGS
CMS Infosystems
Intertek