Filter interviews by
I applied via Naukri.com and was interviewed in Sep 2023. There were 4 interview rounds.
RF means radio frequency.It means commercial. If the audio is faulty on any customer. So it will go into commercial or planning. If there is any issue with the customer.
ciena has a mux to which we send media on the microwave.
SR has to close in 4 hours.
Team Coordinator, team move the field and SR reslove the withen SLA
I was interviewed in Jan 2025.
VLANs are used to segment network traffic for security and performance purposes.
VLANs divide a single physical network into multiple virtual networks.
Each VLAN has its own broadcast domain, reducing network congestion.
VLANs can be configured on switches by assigning ports to specific VLANs.
VLAN tagging allows for traffic to be identified and routed to the correct VLAN.
VLANs can improve network security by isolating sen
Routing protocol is a set of rules used by routers to determine the best path for data packets to reach their destination.
Routing protocols help routers communicate with each other to share information about network topology.
They determine the best path for data packets based on factors like hop count, bandwidth, and delay.
Examples of routing protocols include RIP, OSPF, EIGRP, and BGP.
The OSI model is a conceptual framework that standardizes the functions of a telecommunication or computing system into seven abstraction layers.
The OSI model stands for Open Systems Interconnection model.
It consists of seven layers: Physical, Data Link, Network, Transport, Session, Presentation, and Application.
Each layer has specific functions and communicates with the adjacent layers.
Data is encapsulated and decapsu...
I applied via Referral and was interviewed in Dec 2023. There was 1 interview round.
I applied via Company Website and was interviewed in Aug 2022. There were 2 interview rounds.
Maksat Technologies interview questions for popular designations
I applied via Referral and was interviewed in Dec 2021. There was 1 interview round.
Get interview-ready with Top Maksat Technologies Interview Questions
Telecom refers to the transmission of information over long distances using electronic means.
Telecom involves the use of various technologies such as telephones, radios, and satellites.
It enables communication between people and devices across the world.
Telecom companies provide services such as voice calls, messaging, and internet connectivity.
Examples of telecom companies include AT&T, Verizon, and Vodafone.
RJ45 Connector is a standardized physical network interface for Ethernet connections.
It is used to connect Ethernet cables to network devices such as computers, routers, and switches.
It has 8 pins and is commonly used for Ethernet networking.
It is also known as an 8P8C connector.
It is similar in appearance to a telephone jack, but larger in size.
Patch cables are used to connect networking devices together.
Patch cables are short cables with connectors on both ends used to connect devices like computers, switches, and routers.
They are commonly used in local area networks (LANs) to connect devices to a network switch.
Patch cables come in different lengths and colors, and can be made of different materials like copper or fiber optic.
They are also used in data cent...
I applied via Recruitment Consultant and was interviewed in Jul 2017. There were 3 interview rounds.
4G parameters in KPI are key performance indicators that measure the performance of a 4G network.
4G parameters in KPI include metrics such as signal strength, signal quality, throughput, latency, and handover success rate.
These parameters help assess the overall performance and quality of a 4G network.
For example, signal strength is measured in dBm and indicates the power level of the received signal.
Throughput measure...
SINR stands for Signal-to-Interference-plus-Noise Ratio, a measure of signal quality in wireless communication.
SINR is a ratio of the desired signal power to the interference and noise power.
It is used to evaluate the quality of a wireless signal in a given environment.
Higher SINR values indicate better signal quality and stronger signal-to-noise ratio.
SINR is commonly used in cellular networks to optimize network perf
based on 7 interviews
Interview experience
based on 159 reviews
Rating in categories
RF Engineer
106
salaries
| ₹0 L/yr - ₹0 L/yr |
Team Lead
48
salaries
| ₹0 L/yr - ₹0 L/yr |
Network Engineer
45
salaries
| ₹0 L/yr - ₹0 L/yr |
Team Coordinator
28
salaries
| ₹0 L/yr - ₹0 L/yr |
Field Engineer
17
salaries
| ₹0 L/yr - ₹0 L/yr |
TCS
Wipro
Infosys
HCLTech