Add office photos
Filter interviews by
Maharashtra Seamless Electrical Shift Incharge Interview Questions, Process, and Tips
Maharashtra Seamless Electrical Shift Incharge Interview Experiences
1 interview found
I applied via Recruitment Consultant and was interviewed in Apr 2020. There were 4 interview rounds.
Interview Questionnaire
6 Questions
- Q1. Draw the DC drive basic daigram & explain it and how to program a vfd.
- Ans.
DC drive basic diagram consists of power supply, rectifier, chopper, and motor. VFD programming involves setting parameters for speed, torque, and acceleration.
DC drive diagram includes power supply, rectifier, chopper, and motor
VFD programming involves setting parameters for speed, torque, and acceleration
DC drive controls motor speed and direction
VFD can be programmed using software or keypad
VFD parameters can be adj
- Q2. Have you ever worked on plc, tell me I/p & o/p of PLC's and control daigram of star delta starter
- Q3. Explain asset metrics, iso, kaizen,5s
- Ans.
Asset metrics, ISO, Kaizen, and 5S are all important tools for improving efficiency and productivity in the workplace.
Asset metrics are measurements used to evaluate the performance of assets, such as equipment or machinery.
ISO (International Organization for Standardization) is a set of standards that provide guidelines for quality management systems.
Kaizen is a Japanese term that means continuous improvement. It invo...
- Q4. Explain acbs &vcbs for sub station and which type of relay you uses.
- Ans.
ACBs and VCBs are circuit breakers used in substations. The type of relay used depends on the specific application.
ACBs (Air Circuit Breakers) and VCBs (Vacuum Circuit Breakers) are used in substations to protect electrical equipment from damage due to overloads or short circuits.
ACBs use air as the medium to extinguish the arc, while VCBs use vacuum.
The type of relay used depends on the specific application, such as o...
- Q5. Explain DC motor speed control parameters
- Ans.
DC motor speed control parameters include armature voltage, field current, and mechanical load.
Armature voltage: controls the speed of the motor by varying the voltage applied to the armature.
Field current: controls the strength of the magnetic field and thus the speed of the motor.
Mechanical load: affects the speed of the motor by changing the amount of torque required to turn the motor.
Other factors include the type ...
- Q6. Explai. Plc trouble shootings
Interview Preparation Tips
Checked in which company you are going for interview. What's its products. Clear your all basics mostly questions asked from basic automation or electrical.
Top trending discussions
Interview questions from similar companies
I applied via Approached by Company
(6 Questions)
- Q1. What is cement and how it prepared
- Ans.
Cement is a binding material used in construction to hold together bricks, stones, etc. It is prepared by mixing limestone, clay, and other materials.
Cement is made by heating a mixture of limestone and clay in a kiln at high temperatures
The resulting product, called clinker, is then ground into a fine powder and mixed with gypsum to create cement
Water is added to the cement to form a paste, which hardens over time to ...
- Q2. Types of cement
- Ans.
Types of cement include Portland cement, white cement, rapid hardening cement, and low heat cement.
Portland cement is the most common type used in construction.
White cement is used for architectural purposes and to create colored concrete.
Rapid hardening cement sets quickly and is used in projects with tight deadlines.
Low heat cement generates less heat during hydration and is used in large concrete structures.
- Q3. Cement temperature?
- Ans.
Cement temperature is an important factor in the production process, affecting setting time and strength of the final product.
Cement temperature should be monitored closely during production to ensure optimal conditions.
Higher temperatures can accelerate the setting time of cement, while lower temperatures can slow it down.
The ideal temperature range for cement production is typically between 90-120 degrees Celsius.
Tem...
- Q4. Material handling procedure
- Ans.
Material handling procedure involves the safe and efficient movement of materials within a facility.
Establish clear guidelines for handling different types of materials
Train employees on proper lifting techniques and equipment usage
Implement safety measures such as wearing protective gear and using designated pathways
Regularly inspect equipment and storage areas for potential hazards
Utilize technology like conveyor bel
- Q5. Storage of material
- Ans.
Proper storage of materials is crucial for maintaining quality and safety standards in engineering operations.
Materials should be stored in designated areas to prevent mix-ups and ensure easy access.
Storage areas should be organized and labeled clearly for quick identification.
Certain materials may require specific storage conditions such as temperature control or protection from moisture.
Regular inventory checks shoul...
- Q6. Safe unloading tips
- Ans.
Safe unloading tips are crucial for preventing accidents and injuries.
Always wear appropriate personal protective equipment (PPE) such as gloves, safety glasses, and steel-toed boots.
Inspect the unloading area for any hazards such as uneven ground, overhead obstacles, or slippery surfaces.
Use proper lifting techniques to avoid strain or injury - bend at the knees, keep your back straight, and lift with your legs.
Secure...
Selected
I applied via Recruitment Consulltant and was interviewed in Jul 2024. There were 2 interview rounds.
(1 Question)
- Q1. Emergency handling in power plant
- Ans.
Emergency handling in power plant involves quick response, proper training, and adherence to safety protocols.
Quickly assess the situation and identify the type of emergency (fire, equipment failure, etc.)
Activate emergency shutdown procedures to prevent further damage
Notify appropriate personnel and emergency services
Evacuate personnel to safe locations and ensure their safety
Follow established safety protocols and pr...
General awareness Current affairs
(5 Questions)
- Q1. Conyers maintenance $STP plant
- Q2. Idler replacement work
- Q3. Feed pump maintenance
- Q4. Manpower handling
- Q5. Daily shiftr report
Selected
I applied via Job Portal and was interviewed in Apr 2024. There was 1 interview round.
(3 Questions)
- Q1. Do you like to work with Star Cement Company?
- Q2. What work do you get done in shift
- Q3. What is the safety in your company?
Selected
I applied via Approached by Company and was interviewed in Apr 2023. There were 2 interview rounds.
(2 Questions)
- Q1. 1. Why vaccum is necessary 2.Boiler heating surface are? 3.Use of 3 element feed control station
- Ans.
Answering questions related to vacuum, boiler heating surface, and 3 element feed control station.
Vacuum is necessary to remove air and other gases from a system to create a low-pressure environment.
Boiler heating surfaces are the areas of the boiler where heat is transferred from the combustion gases to the water or steam.
3 element feed control station is used to maintain the water level, steam flow, and feed water fl...
- Q2. What is T11 material
- Ans.
T11 is a type of steel material commonly used in the manufacturing of pipes and tubes.
T11 material is a low alloy steel with a composition of 1.25% chromium and 0.5% molybdenum.
It is commonly used in the construction of boilers, heat exchangers, and piping systems.
T11 material has good strength and corrosion resistance properties.
It is also known as ASTM A213 Grade T11 or ASME SA213 Grade T11.
T11 material is often used...
Production Shift Incharge Interview Questions & Answers
Electrosteel Casting
Anonymous
posted on 24 Oct 2023
Selected
I applied via Naukri.com and was interviewed before Oct 2022. There were 4 interview rounds.
Related to branch paper
(1 Question)
- Q1. Oral interview regarding skills and technical knowledge
(1 Question)
- Q1. Behavioural test , Hr regarding questions
Interview Preparation Tips
Production Shift Incharge Interview Questions & Answers
Electrosteel Casting
Anonymous
posted on 28 Oct 2022
I applied via Company Website and was interviewed in Apr 2022. There were 5 interview rounds.
(1 Question)
- Q1. First fill up the study details and negative place details
Our company checking the person talent
(3 Questions)
- Q1. Checking subject knowledge
- Q2. More persons asking in self details and family details.
- Q3. Next asked Study details
That person see the attitude and suitable or not suitable all persons discussion
Interview Preparation Tips
- Subject
- Engineering
I applied via Company Website and was interviewed in May 2021. There were 3 interview rounds.
Interview Questionnaire
1 Question
- Q1. What is the roles and responsibility of your job and how to handle labour when crate problem when you deal 500 plus work men.
Interview Preparation Tips
Maharashtra Seamless Interview FAQs
Some of the top questions asked at the Maharashtra Seamless Electrical Shift Incharge interview -
Tell us how to improve this page.
Maharashtra Seamless Interviews By Designations
- Maharashtra Seamless Assistant Engineer Interview Questions
- Maharashtra Seamless Electrical Engineer Interview Questions
- Maharashtra Seamless Electrical Maintenance Engineer Interview Questions
- Maharashtra Seamless Graduate Engineer Trainee (Get) Interview Questions
- Maharashtra Seamless Junior Engineer Interview Questions
- Maharashtra Seamless PPC Engineer Interview Questions
- Maharashtra Seamless Senior Fitter Interview Questions
- Maharashtra Seamless Accounts & Finance Manager Interview Questions
- Show more
Interview Questions for Popular Designations
- Shift Incharge Interview Questions
- Shift Engineer Interview Questions
- Production Shift Incharge Interview Questions
- Electrical Shift Engineer Interview Questions
- Shift Supervisor Interview Questions
- Shift Incharge Engineer Interview Questions
- Shift Manager Interview Questions
- Shift Officer Interview Questions
- Show more
People are getting interviews through
Interview Questions from Similar Companies
|
Junior Engineer
143
salaries
|  ₹1.5 L/yr - ₹5 L/yr |
|
Assistant Engineer
99
salaries
| ₹2 L/yr - ₹6.5 L/yr |
|
Engineer
80
salaries
| ₹2.2 L/yr - ₹8.4 L/yr |
|
Senior Engineer
80
salaries
| ₹5 L/yr - ₹10 L/yr |
|
Production Engineer
57
salaries
| ₹2.1 L/yr - ₹6.6 L/yr |
Jindal Saw
Welspun Corp
Man Industries
Surya Roshni
Calculate your in-hand salary
- Home >
- Interviews >
- Maharashtra Seamless Interview Questions >
- Maharashtra Seamless Electrical Shift Incharge Interview Questions
