Filter interviews by
I applied via campus placement at Devi Ahilya Vishwa Vidhyalaya (DAVV), Indore and was interviewed in Jun 2022. There were 2 interview rounds.
Top trending discussions
posted on 24 Feb 2025
I was interviewed in Jan 2025.
Star delta starter is a type of reduced voltage starter used for starting high power motors.
Consists of two contactors - one for star connection and one for delta connection
Reduces starting current and torque to prevent damage to motor windings
Commonly used for motors with high starting current requirements, such as induction motors
Hysteresis loss can be calculated using the area enclosed by the hysteresis loop on a B-H curve.
Calculate the area enclosed by the hysteresis loop on a B-H curve
Use the formula: Hysteresis Loss = ∮B.dH
Consider the material's properties and operating conditions for accurate calculation
Skin effect is the tendency of alternating current to flow near the surface of a conductor, due to self-inductance.
Skin effect is more prominent at higher frequencies.
It causes the effective resistance of the conductor to increase.
Skin effect can be reduced by using hollow conductors or by using stranded conductors.
Example: Skin effect is a common phenomenon in high-frequency transmission lines.
Fluorescent effect is the emission of light by a substance that has absorbed light or other electromagnetic radiation.
Fluorescent effect occurs when a substance absorbs light at a specific wavelength and then re-emits light at a longer wavelength.
Common examples include fluorescent light bulbs, glow-in-the-dark materials, and certain minerals that glow under UV light.
Fluorescent materials can be used in various applica...
In a parallel circuit, components are connected in separate branches, allowing current to flow through multiple paths. In a series circuit, components are connected in a single path, where current flows through each component in sequence.
Parallel circuit allows current to flow through multiple paths, while series circuit has only one path for current.
In a parallel circuit, voltage across each component is the same, whi...
posted on 17 Jan 2025
I applied via Recruitment Consulltant
As a Warehouse Executive, I oversee daily operations, manage inventory, coordinate shipments, and ensure compliance with safety regulations.
Managing inventory levels to ensure optimal stock levels
Coordinating shipments and deliveries to meet customer demands
Overseeing daily operations and ensuring efficiency in warehouse processes
Implementing safety protocols and ensuring compliance with regulations
Training and supervi
I was interviewed in Jan 2025.
posted on 9 Oct 2024
I applied via Referral and was interviewed in Sep 2024. There was 1 interview round.
The main reason for belt joint failure is usually due to improper installation or maintenance.
Improper installation of the belt joint, such as incorrect alignment or tensioning
Lack of proper maintenance, leading to wear and tear of the joint
Use of low-quality materials for the joint
Excessive load or stress on the belt joint
Environmental factors like temperature or humidity affecting the joint
The alignment maximum tolerance refers to the maximum allowable deviation from the specified alignment.
Alignment maximum tolerance is the maximum allowable deviation from the specified alignment.
It is typically expressed in terms of a percentage or a specific measurement unit.
For example, a machine part may have an alignment maximum tolerance of +/- 0.005 inches.
Exceeding the alignment maximum tolerance can lead to per
To replace the bucket wheel reclaimer luffing cylinder, follow these steps.
1. Shut down the machine and ensure all power sources are disconnected.
2. Remove any surrounding components that may obstruct access to the luffing cylinder.
3. Use appropriate tools to disconnect the hydraulic hoses and fittings from the cylinder.
4. Support the weight of the cylinder as it is removed to prevent damage to surrounding components.
5...
JSA stands for Job Safety Analysis, focusing on specific job tasks, while HIRA stands for Hazard Identification and Risk Assessment, focusing on overall workplace hazards.
JSA is task-specific, focusing on individual job tasks and potential hazards
HIRA is broader, looking at overall workplace hazards and assessing risks
JSA involves breaking down a job into steps and identifying potential hazards for each step
HIRA involv...
To create a PR in SAP, you can use transaction code ME51N or ME21N.
Use transaction code ME51N to create a purchase requisition in SAP.
Enter the necessary details such as material, quantity, delivery date, etc.
Save the purchase requisition and it will be created in the system.
Alternatively, you can also use transaction code ME21N to create a purchase order directly.
The procedure of pulley replacement involves identifying the faulty pulley, removing the old pulley, installing the new pulley, and testing the system.
Identify the faulty pulley by checking for any signs of wear or damage.
Use appropriate tools to remove the old pulley, such as a pulley puller or wrench.
Install the new pulley by aligning it properly and securing it in place.
Test the system to ensure the new pulley is fu...
PTW stands for Permit to Work, a procedure used to ensure that work is carried out safely in potentially hazardous environments.
PTW is a formal written system used to control certain types of work that are identified as potentially hazardous.
Before starting work, a permit must be obtained from a designated authority.
The permit outlines the work to be done, the hazards involved, and the necessary precautions to be taken...
posted on 29 Jan 2025
I was interviewed in Dec 2024.
posted on 19 Dec 2024
I am applying for this job because of my passion for managing civil projects and my proven track record of successful project completions.
Passion for managing civil projects
Proven track record of successful project completions
Excited about the opportunity to contribute to impactful infrastructure projects
I requested a salary hike due to increased responsibilities, achievements, and market value.
Increased responsibilities in current role
Achievements such as successful completion of projects or exceeding targets
Market value based on industry standards and experience
Cost of living increase or inflation affecting expenses
The various stages of construction of the foundation of a building include site preparation, excavation, foundation design, footing construction, and foundation pouring.
Site preparation involves clearing the area and leveling the ground for construction.
Excavation is the process of digging a hole in the ground to create space for the foundation.
Foundation design is crucial to ensure the building's stability and load-be...
The design mix for concrete is the proportion of various ingredients like cement, sand, aggregates, and water to achieve the desired strength and durability.
Design mix is determined based on the required strength and durability of the concrete
It involves selecting the right proportions of cement, sand, aggregates, and water
Various factors like type of construction, exposure conditions, and desired workability influence...
I applied via Approached by Company and was interviewed in Nov 2024. There was 1 interview round.
I have experience parallelizing transformers by splitting them across multiple devices to minimize latency.
I have utilized frameworks like TensorFlow and PyTorch to parallelize transformers.
I approach splitting transformers by dividing the input data into chunks and distributing them across devices.
I optimize communication overhead by minimizing data transfer between devices.
I leverage techniques like data parallelism ...
posted on 22 Dec 2024
I applied via Campus Placement and was interviewed in Jul 2024. There were 3 interview rounds.
Full c concept MCQ with IQ and Computaional Thinking
Number system conversion in C involves converting numbers between different bases, such as decimal to binary or hexadecimal.
Use functions like itoa() to convert integers to strings in different bases
Use strtol() to convert strings to integers in different bases
Remember to specify the base when converting numbers
based on 1 interview
Interview experience
based on 5 reviews
Rating in categories
Boiler DCS Operator
4
salaries
| ₹1.5 L/yr - ₹2.5 L/yr |
Mechanical Engineer
3
salaries
| ₹2.4 L/yr - ₹2.7 L/yr |
Huawei Technologies
Marelli
Seoyon E-hwa Automotive
TCL