Upload Button Icon Add office photos

Filter interviews by

LMW Textile Machinery Division Post Graduate Engineer Trainee [pget] Interview Questions and Answers

Updated 19 Oct 2022

LMW Textile Machinery Division Post Graduate Engineer Trainee [pget] Interview Experiences

1 interview found

I applied via Walk-in and was interviewed before Oct 2021. There were 4 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Aptitude Test 

It was a aptitude + technical MCQ round

Round 3 - Group Discussion 

Just to test your communication. In our batch everyone were selected for the final round.

Round 4 - Technical 

(3 Questions)

  • Q1. Questions were raised from the project that I was carrying out during my master's
  • Q2. Stress strain curve was asked to draw
  • Ans. 

    Stress-strain curve shows the relationship between stress and strain in a material.

    • The curve has three regions: elastic, plastic, and fracture.

    • Elastic region shows linear relationship between stress and strain.

    • Plastic region shows non-linear relationship between stress and strain.

    • Fracture region shows the point at which the material breaks.

    • The slope of the curve in the elastic region is called Young's modulus.

    • The area ...

  • Answered by AI
  • Q3. More basic and questions related to my project were asked

Interview Preparation Tips

Interview preparation tips for other job seekers - Be strong at what you have mentioned in your resume.

Interview questions from similar companies

I was interviewed in Dec 2016.

Interview Preparation Tips

Round: Test
Duration: 1 hour 10 minutes
Total Questions: 65

Round: Group Discussion
Duration: 15 minutes

Round: Technical + HR Interview
Experience: Started with HR questions.then they asked about GSM channel types,up/down freq of GSM.difference between satellite and GSM up/down freq.explain b.tech project then m.tech thesis.then had a healthy discussion on thesis topic.
Tips: Go through wireless communications by Rappaport

College Name: NIT ALLAHABAD
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
No response

I applied via LinkedIn and was interviewed in Oct 2024. There were 2 interview rounds.

Round 1 - Aptitude Test 

Numerical logical analysis

Round 2 - Technical 

(2 Questions)

  • Q1. Oops concepts , basic concepts
  • Q2. Java , react js, front end questions, sql
Interview experience
3
Average
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Not Selected

I applied via LinkedIn and was interviewed in Nov 2024. There was 1 interview round.

Round 1 - Case Study 

There was a panel of 8 member .They gave us case study of one paragraph in which we have to speak for 15 min and remaining 15 min for conclusion.

Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Campus Placement and was interviewed in Feb 2024. There were 3 interview rounds.

Round 1 - Aptitude Test 

Basic aptitude test (online)

Round 2 - Group Discussion 

Basic topics, we have to talk for 5min.

Round 3 - One-on-one 

(3 Questions)

  • Q1. Resume based questions
  • Q2. Relocation all over india
  • Q3. Questions on favourite subject

Interview Preparation Tips

Interview preparation tips for other job seekers - Prepare well with your resume, basic engineering questions. The interview will be smooth don't get hurry.
Interview experience
3
Average
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
No response

I applied via Naukri.com and was interviewed in Sep 2024. There was 1 interview round.

Round 1 - HR 

(2 Questions)

  • Q1. Resume questions
  • Q2. Department orientated questions
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Referral and was interviewed in Aug 2023. There was 1 interview round.

Round 1 - One-on-one 

(5 Questions)

  • Q1. How to find yield strength of 8mm dia steel of 550 grade?
  • Ans. 

    The yield strength of 8mm dia steel of 550 grade can be found using standard testing methods.

    • Yield strength is the maximum stress a material can withstand without permanent deformation

    • Standard testing methods like tensile testing can be used to determine the yield strength

    • The 550 grade refers to the minimum yield strength of the steel

    • Consulting the material's specification or conducting tests can provide the exact yiel

  • Answered by AI
  • Q2. What is bleeding and segregation?
  • Ans. 

    Bleeding and segregation are phenomena that occur in concrete during its placement and curing process.

    • Bleeding is the process of water rising to the surface of freshly placed concrete due to the settlement of solid particles.

    • Segregation refers to the separation of coarse aggregates from the rest of the concrete mix, resulting in an uneven distribution of materials.

    • Bleeding can lead to a weakened surface layer and reduc...

  • Answered by AI
  • Q3. Specify design mix ratios of various concrete mixes?
  • Ans. 

    The design mix ratios of concrete mixes vary depending on the specific requirements and applications.

    • Design mix ratios are determined based on factors such as strength, workability, durability, and environmental conditions.

    • Common design mix ratios include 1:2:4 (cement:sand:aggregate) for general construction, 1:1.5:3 for reinforced concrete, and 1:0.5:1 for high-strength concrete.

    • Different types of concrete mixes, suc...

  • Answered by AI
  • Q4. Draw shear force and bending moment diagrams
  • Ans. 

    Shear force and bending moment diagrams are graphical representations of the internal forces and moments in a structural element.

    • Shear force diagram shows the variation of shear force along the length of the element.

    • Bending moment diagram shows the variation of bending moment along the length of the element.

    • Shear force and bending moment diagrams are commonly used in structural analysis and design.

    • These diagrams help e...

  • Answered by AI
  • Q5. Earthquake design methods like static and dynamic methods formulae
Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - HR 

(1 Question)

  • Q1. Group discussion
Round 2 - HR 

(2 Questions)

  • Q1. Mainly focused on mass transfer
  • Q2. Some questions from heat transfer

Interview Preparation Tips

Interview preparation tips for other job seekers - Be clear on basics
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
4-6 weeks
Result
Selected Selected

I applied via Campus Placement and was interviewed in Nov 2023. There was 1 interview round.

Round 1 - Aptitude Test 

The questions are related to Arithmetic, Logical Reasoning and Core subject.

Interview Preparation Tips

Interview preparation tips for other job seekers - In the second round there was a psychometric test which is online based and the 3rd round was Technical Interview and HR Round.
Interview experience
4
Good
Difficulty level
Hard
Process Duration
Less than 2 weeks
Result
Not Selected

I applied via campus placement at Sardar Vallabhbhai National Institute of Technology (NIT), Surat and was interviewed in Mar 2023. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Aptitude Test 

45 mins test. 30 technical questions. 15 aptitude.

Round 3 - One-on-one 

(2 Questions)

  • Q1. Tell me about your projects.
  • Ans. 

    I have worked on various projects during my studies, including a smart home automation system and a renewable energy monitoring system.

    • Developed a smart home automation system using Arduino and Raspberry Pi

    • Designed and implemented a renewable energy monitoring system using IoT sensors

    • Collaborated with a team to develop a mobile app for remote control of home appliances

    • Conducted testing and troubleshooting to ensure the

  • Answered by AI
  • Q2. Why do you want to join TVS?
  • Ans. 

    I want to join TVS because of its strong reputation in the engineering industry and its commitment to innovation and growth.

    • TVS has a strong reputation in the engineering industry for its high-quality products and services.

    • TVS is known for its commitment to innovation and continuous improvement.

    • TVS offers excellent opportunities for career growth and development.

    • TVS has a diverse and inclusive work culture that values ...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Be confident and technically sound. Be ready for on-the-spot problem solving questions.

LMW Textile Machinery Division Interview FAQs

How many rounds are there in LMW Textile Machinery Division Post Graduate Engineer Trainee [pget] interview?
LMW Textile Machinery Division interview process usually has 4 rounds. The most common rounds in the LMW Textile Machinery Division interview process are Resume Shortlist, Aptitude Test and Group Discussion.

Tell us how to improve this page.

Interview Questions from Similar Companies

BYJU'S Interview Questions
3.1
 • 2.2k Interviews
Asian Paints Interview Questions
4.0
 • 643 Interviews
Vodafone Idea Interview Questions
4.1
 • 556 Interviews
EPAM Systems Interview Questions
3.7
 • 538 Interviews
ZS Interview Questions
3.4
 • 485 Interviews
Siemens Interview Questions
4.1
 • 432 Interviews
Tata Projects Interview Questions
4.2
 • 422 Interviews
Goldman Sachs Interview Questions
3.5
 • 408 Interviews
Synechron Interview Questions
3.6
 • 364 Interviews
View all

Fast track your campus placements

View all
Senior Engineer
6 salaries
unlock blur

₹6 L/yr - ₹9 L/yr

Assistant Manager
5 salaries
unlock blur

₹8 L/yr - ₹12 L/yr

QA Engineer
5 salaries
unlock blur

₹1.5 L/yr - ₹3 L/yr

Design Engineer
4 salaries
unlock blur

₹5.1 L/yr - ₹5.8 L/yr

Engineer
3 salaries
unlock blur

₹4 L/yr - ₹6.2 L/yr

Explore more salaries
Compare LMW Textile Machinery Division with

Rieter

3.7
Compare

Truetzschler India

4.0
Compare

Voltas

4.0
Compare

Lakshmi Machine Works

4.0
Compare
Did you find this page helpful?
Yes No
write
Share an Interview