AmbitionBox
Interview Questions
- Reviews
- Salaries
- Interview Questions
- About Company
- Benefits
- Jobs
- Office Photos
- Community
Add office photos
Filter interviews by
La-Gajjar Machineries Interview Questions, Process, and Tips
Top La-Gajjar Machineries Interview Questions and Answers
- Q1. When motor run in shut off head Ampere increase or decrease?asked in Service Engineer interview
- Q2. What do you mean by Fire and fire loadasked in Safety Officer interview
La-Gajjar Machineries Interview Experiences
8 interviews found
Interview Questionnaire
6 Questions
- Q1. Type of stator
- Ans.
The type of stator refers to the design and configuration of the stationary part of an electric motor or generator.
The type of stator can vary depending on the specific application and motor design.
Common types of stators include squirrel cage, wound rotor, and permanent magnet stators.
Squirrel cage stators are widely used in induction motors and consist of laminated iron cores with copper or aluminum bars embedded in ...
- Q2. Dol or star delta
- Q3. What use of pressure cup in motor
- Ans.
Pressure cup is used to measure the pressure of lubrication oil in the motor.
Pressure cup is attached to the motor to measure the pressure of lubrication oil.
It helps in ensuring that the oil pressure is within the recommended range.
If the pressure is too low, it can cause damage to the motor.
If the pressure is too high, it can cause oil leaks and other issues.
Regular monitoring of oil pressure using pressure cup can h
- Q4. Reduce the temperature
- Ans.
To reduce the temperature, we can adjust the thermostat or use cooling methods.
Adjust the thermostat to a lower temperature
Use fans or air conditioning to cool the room
Apply a cold compress to the body
Drink cold water or other cold beverages
Take a cool shower or bath
- Q5. When motor run in shut off head Ampere increase or decrease?
- Ans.
Ampere increases when motor runs in shut off head.
Ampere is the measure of electrical current.
Shut off head is the maximum head that a pump can generate.
When the motor runs in shut off head, it experiences maximum resistance, causing the current to increase.
- Q6. Ampere decrease because flow is directly proportion to current
- Ans.
Ampere decreases because current flow is directly proportional to current.
Current flow and amperage are directly related.
As current flow decreases, amperage decreases.
Ohm's Law states that amperage is equal to voltage divided by resistance.
Service Engineer Interview Questions asked at other Companies
Karthik dc Dc
Very difficult asked on balanced graps trees
Software Developer Interview Questions asked at other Companies
(1 Question)
- Q1. Past experience Nothing much
(1 Question)
- Q1. Lease account ing Rou Depreciation
Interview Preparation Tips
Attitude towards work matters
Deputy Manager Interview Questions asked at other Companies
General discussion market knowledge
Technical sales experience market and business
(1 Question)
- Q1. Documentation and medical fitness test
(1 Question)
- Q1. Market areas and businesses
Interview Preparation Tips
Marketing skills
Team handling skills
Strong dealer network
Area Sales Manager Interview Questions asked at other Companies
La-Gajjar Machineries interview questions for popular designations
I applied via LinkedIn and was interviewed in Dec 2021. There were 4 interview rounds.
Question level was moderate
They form a group of 7 people and give the time limit of 9 plus 1 minute.
(4 Questions)
- Q1. The question is from pure technical
- Q2. Introduce yourself, long term goal, strength and weakness, what do you mean by safety, hazard and risk.
- Q3. Define confined space
- Ans.
Confined space is an area with limited entry and exit points, not designed for continuous occupancy, and poses potential hazards.
Examples include tanks, vessels, silos, sewers, and tunnels.
Confined spaces may contain hazardous atmospheres, such as toxic gases or lack of oxygen.
Proper training, equipment, and procedures are necessary for safe entry and work in confined spaces.
- Q4. What do you mean by Fire and fire load
- Ans.
Fire is a chemical reaction that releases heat and light. Fire load refers to the amount of combustible material in a given area.
Fire is a rapid oxidation process that produces heat and light
Fire load is the amount of combustible material in a given area
Fire load can include furniture, paper, wood, and other flammable materials
The higher the fire load, the greater the risk of a fire spreading quickly
Interview Preparation Tips
Safety Officer Interview Questions asked at other Companies
Selected
I applied via Referral and was interviewed before Aug 2022. There were 2 interview rounds.
(3 Questions)
- Q1. First introduction round and typing round
- Q2. Last telephonic round
- Q3. Experience not required
Interview Preparation Tips
- Communication Skills
- Excel
- Soft Skills
Telli Caller Interview Questions asked at other Companies
Yasheel Sharma
Selected
I applied via Approached by Company and was interviewed before Sep 2022. There were 2 interview rounds.
(2 Questions)
- Q1. May ask prior experience and background,5 years post vision about your career
- Q2. Your planning and learning with privious employer
Interview Preparation Tips
Area Sales Manager Interview Questions asked at other Companies
Interview Questionnaire
3 Questions
- Q1. Sychopancy and boot licking is prevalent. Highly avoid this company if one wants to remain same and rational.
- Q2. What separation drives one to work for such principle,-less management?
- Q3. Lack of self respect
Interview questions from similar companies
Area Sales Manager Interview Questions & Answers
Godrej & Boyce Manufacturing
Anonymous
posted on 22 May 2021
I applied via Recruitment Consultant and was interviewed before May 2020. There were 4 interview rounds.
Interview Questionnaire
3 Questions
- Q1. Introduce yourself
- Q2. What you see yourself in 5 years
- Q3. Tell us about the knowledge of current market scenario
- Ans.
I have a thorough understanding of the current market trends and consumer behavior.
I keep myself updated with industry news and reports.
I analyze sales data and customer feedback to identify trends.
I attend trade shows and conferences to stay informed about new products and competitors.
I regularly communicate with my team and colleagues to share insights and best practices.
For example, I recently noticed a shift toward...
Interview Preparation Tips
Be Practical
Maintain your Basics
I applied via Other and was interviewed before Feb 2018. There was 1 interview round.
Interview Questionnaire
1 Question
- Q1. First rount
Interview Preparation Tips
Duration: <1 week
La-Gajjar Machineries Interview FAQs
Tell us how to improve this page.
La-Gajjar Machineries Interviews By Designations
- La-Gajjar Machineries Area Sales Manager Interview Questions
- La-Gajjar Machineries Safety Officer Interview Questions
- La-Gajjar Machineries Software Developer Interview Questions
- La-Gajjar Machineries Telli Caller Interview Questions
- La-Gajjar Machineries Service Engineer Interview Questions
- La-Gajjar Machineries Deputy Manager Interview Questions
Interview Questions for Popular Designations
La-Gajjar Machineries Interview Process
based on 7 interviews
Interview experience
Interview Questions from Similar Companies
La-Gajjar Machineries Reviews and Ratings
based on 184 reviews
Rating in categories
|
Production Engineer
35
salaries
|  ₹0 L/yr - ₹0 L/yr |
|
Assistant Manager
23
salaries
| ₹0 L/yr - ₹0 L/yr |
|
Sales Officer
23
salaries
| ₹0 L/yr - ₹0 L/yr |
|
Area Sales Manager
19
salaries
| ₹0 L/yr - ₹0 L/yr |
|
Senior Engineer
13
salaries
| ₹0 L/yr - ₹0 L/yr |
AceMicromatic Group
JCB
TAL Manufacturing Solutions
Kirloskar Oil Engines
- Home >
- Interviews >
- La-Gajjar Machineries Interview Questions
