Filter interviews by
I applied via Recruitment Consulltant and was interviewed in Mar 2024. There was 1 interview round.
Rotating equipment parameters refer to the various factors that affect the performance and operation of rotating machinery.
Key parameters include speed, torque, power, vibration levels, temperature, and lubrication.
Proper monitoring and maintenance of these parameters are essential for ensuring optimal performance and preventing breakdowns.
Examples of rotating equipment include pumps, compressors, turbines, and motors.
...
Top trending discussions
I appeared for an interview before Nov 2023.
One of my biggest achievements was successfully leading a team to complete a complex project ahead of schedule and under budget.
Led a team to complete a complex project ahead of schedule
Managed resources effectively to stay under budget
Received recognition for successful project completion
Refrigeration cycle is a process in which a refrigerant absorbs heat from a low-temperature space and rejects it in a high-temperature space.
The refrigeration cycle consists of four main components: compressor, condenser, expansion valve, and evaporator.
The refrigerant starts as a low-pressure gas in the evaporator where it absorbs heat from the space being cooled.
The compressor then compresses the refrigerant into a h...
Four stroke cycle engine works by completing four distinct processes - intake, compression, power, and exhaust strokes.
Intake stroke: Air-fuel mixture is drawn into the cylinder as the piston moves downward.
Compression stroke: The intake valve closes and the piston compresses the mixture, preparing it for ignition.
Power stroke: The spark plug ignites the compressed mixture, causing an explosion that drives the piston d...
posted on 15 Nov 2022
I applied via Referral and was interviewed before Nov 2021. There were 4 interview rounds.
Calibration of pressure and temperature involves adjusting instruments to ensure accurate readings.
Calibration involves comparing the readings of a device to a known standard and making adjustments if necessary.
For pressure calibration, a pressure gauge is connected to a reference standard to check accuracy.
Temperature calibration may involve using a temperature bath with known values to adjust a thermometer.
Regular ca...
Current is the flow of electric charge in a circuit.
Current is measured in Amperes (A)
It is the rate of flow of electric charge through a conductor
There are two types of current - AC (alternating current) and DC (direct current)
Examples of current include the flow of electrons in a wire when a light bulb is turned on
Voltage is the difference in electric potential between two points in a circuit, measured in volts.
Voltage is the driving force that pushes electric current through a circuit
It is measured in volts (V)
Voltage can be positive or negative, depending on the direction of current flow
Higher voltage means more potential energy available to move electrons
Example: A battery provides voltage to power a light bulb
Ohm's law states that the current flowing through a conductor is directly proportional to the voltage applied across it, and inversely proportional to the resistance of the conductor.
Ohm's law is expressed as V = I * R, where V is voltage, I is current, and R is resistance.
It helps in calculating the current flowing through a circuit when the voltage and resistance are known.
It can also be used to determine the resista...
posted on 5 Jan 2023
I appeared for an interview in Dec 2022.
posted on 1 Apr 2025
I appeared for an interview before Apr 2024, where I was asked the following questions.
An instrument is a device used to measure, control, or manipulate physical quantities in various fields.
Instruments can measure temperature, pressure, flow, and level.
Examples include thermometers, manometers, flow meters, and level sensors.
They are essential in industries like manufacturing, healthcare, and environmental monitoring.
Instruments can be analog or digital, with varying degrees of precision and functionali
Pressure is the force applied per unit area on a surface, influencing fluid dynamics and mechanical systems.
Pressure is measured in units such as Pascals (Pa), atmospheres (atm), or pounds per square inch (psi).
In fluids, pressure increases with depth due to the weight of the fluid above.
Example: Atmospheric pressure at sea level is approximately 101.3 kPa.
In medical terms, blood pressure is a critical measure of cardi
I applied via Company Website and was interviewed in Feb 2024. There was 1 interview round.
Ohm's law states that the current flowing through a conductor is directly proportional to the voltage applied across it, and inversely proportional to the resistance of the conductor.
Ohm's law is represented by the formula V = I * R, where V is voltage, I is current, and R is resistance.
It helps in calculating the current, voltage, or resistance in a circuit when the other two values are known.
For example, if a circuit...
posted on 20 Apr 2024
Utility Maintenance air compressor ,dg,Transformer , earth Testing, ups, panel pm ,reading in excle etc
I applied via Job Fair and was interviewed in May 2023. There were 3 interview rounds.
Written/Aptitude test: The first round for most of the companies is written round. ...
Technical interview Round: The next round is a technical interview. ...
HR interview round: The HR interview round is the last round where candidates are judged on the basis of their communication skills, soft skills, confidence level, etc.
based on 1 interview
Interview experience
based on 4 reviews
Rating in categories
Field Operator
82
salaries
| ₹18 L/yr - ₹36 L/yr |
DCS Operator
32
salaries
| ₹24 L/yr - ₹42 L/yr |
Operations Engineer
32
salaries
| ₹15.7 L/yr - ₹65 L/yr |
Instrumentation Technician
23
salaries
| ₹3.8 L/yr - ₹13 L/yr |
Instrument Engineer
22
salaries
| ₹9 L/yr - ₹28.4 L/yr |
Reliance Industries
Shell
Oil And Natural Gas Corporation
Linde India