KisanKraft Machine Tools Quality Manager Interview Questions and Answers

Q1. Have you prepared CAPA?
Ans. 
Yes, I have prepared CAPA (Corrective and Preventive Action) reports in my previous roles.
• Yes, I have prepared CAPA reports to address quality issues and prevent their recurrence.

• I have experience in conducting root cause analysis to identify the underlying issues.

• I have implemented corrective actions to address immediate concerns and preventive actions to avoid future issues.

• I have also monitored the effectiveness of
Answered by AI
Add your answer
Q2. What is APQP and their application
Ans. 
APQP stands for Advanced Product Quality Planning. It is a structured method for defining and establishing the steps necessary to ensure that a product satisfies the customer.
• APQP is a quality framework used in the automotive industry to ensure that products meet customer requirements.

• It involves a series of phases including planning, product design and development, process design and development, product and process v...read more
Answered by AI
Add your answer
Q3. 7QC Tools and their application
Ans. 
7QC Tools are a set of tools used for quality control and improvement in manufacturing processes.
• Check Sheet: Used to collect and analyze data, such as defects in a product.

• Histogram: Shows the frequency distribution of a set of data.

• Pareto Chart: Helps identify the most significant factors contributing to a problem.

• Cause and Effect Diagram (Fishbone Diagram): Used to identify and analyze potential causes of a problem.

• ...read more
Answered by AI
Add your answer
Q4. What all are the PPAP Documents?
Ans. 
PPAP documents include documents like control plan, FMEA, measurement system analysis, etc.
• Control Plan

• FMEA (Failure Mode and Effects Analysis)

• Measurement System Analysis

• Part Submission Warrant

• Process Flow Diagram

• Appearance Approval Report
Answered by AI
Add your answer
Q5. Acceptance criteria for SPC&MSA
Ans. 
Acceptance criteria for SPC&MSA involves setting specific requirements for statistical process control and measurement system analysis.
• Acceptance criteria for SPC should include specifications for control limits, process stability, and capability indices.

• Acceptance criteria for MSA should include requirements for bias, linearity, stability, repeatability, and reproducibility.

• Examples of acceptance criteria for SPC coul...read more
Answered by AI
Add your answer
Q6. How you're declaring the severity in PFMEA
Ans. 
Severity in PFMEA is declared based on the potential impact of a failure mode on the overall process or product.
• Severity is typically rated on a scale from 1 to 10, with 1 being the least severe and 10 being the most severe.

• Consider the consequences of a failure mode on customer safety, regulatory compliance, product functionality, and overall process performance.

• Examples of high severity failure modes include those th...read more
Answered by AI
Add your answer

Q1. 7Qc tool capa red bin analysis ppm
Add your answer
Q2. 5core tool spc fmea msa control plan
Add your answer

Q1. All tech question on previous exp.
Add your answer

Water supply projects related with family question paper and send me.

Q1. About yourself, working profile, family background, your confidence, where you gonna stay, how will you reach to the office etc
Add your answer

Q1. ABOUT YOUR RESUME AND GENERAL OF WELDING, DRAWING AND FABRICATIONS
Add your answer

Q1. Will you have similar work experience as required by client.
Ans. 
Yes, I have similar work experience as required by the client.
• I have worked as a Quality Engineer for the past 5 years.

• I have experience in conducting quality audits and inspections.

• I have implemented quality control processes and procedures.

• I have worked with cross-functional teams to identify and resolve quality issues.

• I have experience in using quality tools and techniques such as Six Sigma and Lean methodologies.

• I ...read more
Answered by AI
View 1 more answer
Q2. How will you confirm the proper vertical alingment of Tubewell pipe lowering.
Ans. 
To confirm the proper vertical alignment of Tubewell pipe lowering, measurements and visual inspections can be conducted.
• Measure the verticality of the pipe using a plumb bob or laser level.

• Inspect the pipe for any visible signs of misalignment or tilting.

• Compare the measurements and visual observations with the specified tolerances.

• Ensure that the pipe is securely anchored to prevent any movement or deviation from the...read more
Answered by AI
View 1 more answer
Q3. What's are the components of a Single village scheme.
Ans. 
A Single village scheme consists of various components aimed at improving the quality of life in a single village.
• Infrastructure development

• Access to clean water and sanitation facilities

• Education and skill development

• Healthcare facilities

• Livelihood opportunities

• Social welfare programs

• Community empowerment
Answered by AI
View 1 more answer
Q4. What are the different types of pipes used in water supply project
Ans. 
There are several types of pipes used in water supply projects, including PVC, HDPE, copper, galvanized steel, and PEX.
• PVC pipes are commonly used due to their affordability, durability, and resistance to corrosion.

• HDPE pipes are known for their flexibility, high strength, and resistance to chemicals.

• Copper pipes are often used for indoor plumbing due to their excellent heat and corrosion resistance.

• Galvanized steel pi...read more
Answered by AI
View 2 more answers
Q5. What will be your approach on project management staregy.
Ans. 
My approach to project management strategy is to prioritize clear communication, establish realistic goals, and continuously monitor progress.
• Prioritize clear and effective communication with all stakeholders

• Establish realistic and achievable goals and milestones

• Continuously monitor project progress and make necessary adjustments

• Implement quality control measures to ensure adherence to standards

• Regularly assess risks a...read more
Answered by AI
View 1 more answer
Q6. Do you work on project monitoring and inspection of water supply project.
Ans. 
Yes, I have experience in project monitoring and inspection of water supply projects.
• I have worked on multiple water supply projects where I was responsible for monitoring and inspecting the quality of the water supply.

• I have conducted regular inspections to ensure compliance with quality standards and regulations.

• I have implemented quality control measures to identify and address any issues or deficiencies in the wate...read more
Answered by AI
View 1 more answer
Q7. Do you know to prepare check list for every components of item to be execute as per RFP.
Ans. 
Yes
• Yes, I am familiar with preparing checklists for every component of an item to be executed as per the RFP.

• I understand the importance of having a comprehensive checklist to ensure all requirements are met.

• I have experience in creating checklists for quality control processes and inspections.

• I am proficient in identifying critical components and their associated requirements.

• I can prioritize checklist items based on ...read more
Answered by AI
View 1 more answer
Q8. Do you have any liazoning skills with government Client.
Ans. 
Yes, I have experience with liaising with government clients.
• I have successfully managed relationships with government clients in my previous role as a Quality Engineer.

• I am familiar with the protocols and procedures involved in working with government clients.

• I have effectively communicated and coordinated with government agencies to ensure compliance and quality standards.

• I have experience in navigating the bureaucra...read more
Answered by AI
View 1 more answer

Q1. Major NDT Updated technology in fab structures
Ans. 
Digital Radiography and Ultrasonic Testing are major NDT updated technologies in fab structures.
• Digital Radiography uses digital sensors to capture images of internal structures of materials and components.

• Ultrasonic Testing uses high-frequency sound waves to detect internal flaws and defects in materials.

• Both technologies provide faster and more accurate results compared to traditional NDT methods.

• They also offer the ...read more
Answered by AI
Add your answer
Q2. Stress and Strain point analysis
Add your answer