Filter interviews by
I applied via Campus Placement and was interviewed in Dec 2022. There was 1 interview round.
M06 is a code used in CNC machining to perform a tool change.
M06 is a standard code used in CNC programming.
It is used to initiate a tool change during machining operations.
The code is followed by the tool number or identifier.
For example, M06 T02 would indicate a tool change to tool number 2.
M00 is a code used in CNC programming to initiate a program stop or pause.
M00 is used to temporarily halt the CNC program execution.
It is often used for manual intervention or to allow the operator to inspect the workpiece.
After the M00 code is executed, the program can be resumed using the cycle start button or another command.
Example: M00 ; Program pause
Top trending discussions
The type of introduction can set the tone for the interview and give insight into the candidate's personality.
Consider starting with a brief background about yourself
Highlight your relevant experience and skills
Express enthusiasm for the position and company
Tailor the introduction to the specific job and company
Avoid sharing personal information that is not relevant to the job
5S success is achieved through systematic organization, cleanliness, standardization, and sustaining discipline in the workplace.
Sort: Remove unnecessary items and keep only what is needed.
Set in Order: Organize items in a logical and efficient manner.
Shine: Keep the workplace clean and tidy.
Standardize: Establish protocols and procedures for maintaining the 5S system.
Sustain: Continuously reinforce the 5S principles t
based on 1 review
Rating in categories
Trainee
32
salaries
| ₹1.6 L/yr - ₹3 L/yr |
Diploma Mechanical Engineer
24
salaries
| ₹1.5 L/yr - ₹3 L/yr |
Production Engineer
22
salaries
| ₹2 L/yr - ₹11 L/yr |
CNC Operator
17
salaries
| ₹1.8 L/yr - ₹3.2 L/yr |
Diploma Trainee
17
salaries
| ₹1.2 L/yr - ₹2.5 L/yr |
Lakshmi Machine Works
Voltas
BHEL
TCS