Upload Button Icon Add office photos
Engaged Employer

i

This company page is being actively managed by Kent plc Team. If you also belong to the team, you can get access from here

Kent plc Verified Tick

Compare button icon Compare button icon Compare

Filter interviews by

Kent plc Electrical Commissioning Technician Interview Questions and Answers

Updated 16 Sep 2017

Kent plc Electrical Commissioning Technician Interview Experiences

1 interview found

Interview Questionnaire 

2 Questions

  • Q1. When the 2 incomers is energized what is the status of bus tie
  • Ans. 

    The status of the bus tie when the 2 incomers are energized depends on the specific electrical system design.

    • In some electrical systems, the bus tie remains open when both incomers are energized.

    • In other systems, the bus tie automatically closes to parallel the two incomers.

    • The purpose of the bus tie is to provide redundancy and flexibility in the electrical system.

    • Examples of bus tie statuses include 'open', 'closed',

  • Answered by AI
  • Q2. What do you mean by external internal panel wiring connection
  • Ans. 

    External internal panel wiring connection refers to the wiring connections made between the external devices and the internal components of an electrical panel.

    • External internal panel wiring connection involves connecting external devices such as sensors, switches, and actuators to the internal components of an electrical panel.

    • These connections are made using wires or cables and are essential for the proper functionin...

  • Answered by AI

Interview Preparation Tips

Round: Technical Interview
Experience: Its ok, go to the next table
Tips: Salary offer

Interview questions from similar companies

Interview experience
5
Excellent
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Referral and was interviewed before Aug 2022. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(1 Question)

  • Q1. Work knowledge and Willing
Round 3 - HR 

(1 Question)

  • Q1. Discuss about Salary and contract details

Interview Preparation Tips

Interview preparation tips for other job seekers - Good company in Aviation field
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Walk-in and was interviewed in Dec 2023. There was 1 interview round.

Round 1 - Technical 

(5 Questions)

  • Q1. Power supply machine
  • Q2. Electrical equipment
  • Q3. T/F or DG Related
  • Q4. Power supply related
  • Q5. AC DC power supply related

Interview Preparation Tips

Interview preparation tips for other job seekers - Good work reference

I applied via Referral and was interviewed in Mar 2022. There was 1 interview round.

Round 1 - Technical 

(1 Question)

  • Q1. What is electrical system
  • Ans. 

    An electrical system is a network of interconnected components that work together to generate, transmit, and distribute electrical power.

    • An electrical system includes power generation sources such as power plants or renewable energy sources.

    • It also includes transmission lines that carry electricity over long distances.

    • Distribution networks deliver electricity to homes, businesses, and other end-users.

    • Electrical systems...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Good experience and good seeking technical

I applied via Company Website and was interviewed before Jun 2021. There was 1 interview round.

Round 1 - Technical 

(1 Question)

  • Q1. Simple pump related questions

Interview Preparation Tips

Interview preparation tips for other job seekers - Remember the over arching concepts learnt in your university

I applied via Recruitment Consulltant and was interviewed before Dec 2021. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Practical interview 

(2 Questions)

  • Q1. 3phase Moter Star+Delta stater how work
  • Ans. 

    Star-Delta starter is used to start 3-phase motors. It reduces the starting current and torque.

    • Star-Delta starter connects the motor in star configuration during starting to reduce the starting current and torque.

    • After a few seconds, the starter switches the motor to delta configuration for normal operation.

    • This method is used for motors with high starting current and torque requirements.

    • It is commonly used in industri...

  • Answered by AI
  • Q2. DOL stater how work 3phase moter
  • Ans. 

    DOL starter is a direct-on-line starter used to start 3-phase motors by connecting them directly to the power supply.

    • DOL starter provides full voltage to the motor at the start

    • It consists of a contactor, overload relay, and start/stop push buttons

    • The contactor connects the motor to the power supply

    • The overload relay protects the motor from overloading

    • The start/stop push buttons control the on/off function of the motor

  • Answered by AI

Interview Preparation Tips

Topics to prepare for Indian Oil Corporation Electrical Supervisor interview:
  • As your interested job line
Interview preparation tips for other job seekers - Self confidence with your perfect experience work in your

I applied via Approached by Company and was interviewed in Oct 2018. There were 5 interview rounds.

Interview Questionnaire 

2 Questions

  • Q1. Technical questions like transformer & transmission and distribution system
  • Q2. Salary discussion.

Interview Preparation Tips

Round: Test
Experience: Aptitude, 60 questions 60 minutes

General Tips: Nice interview
This interview was a technical one but was majorly a stress test. It lasted for about 1 hour 10 minutes. The interviewer wanted to test both my knowledge and communication skills.
Skills: Communication, Body Language, Problem Solving, Analytical Skills, Leadership, Presentation Skills, Time Management, Decision Making Skills
Duration: 1-4 weeks
Interview experience
4
Good
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Campus Placement and was interviewed before Sep 2023. There were 3 interview rounds.

Round 1 - Aptitude Test 

Core question relevant to department

Round 2 - One-on-one 

(1 Question)

  • Q1. Related to CNG & CGD
Round 3 - One-on-one 

(2 Questions)

  • Q1. Related to Company & my profile
  • Q2. Basic HR questions
Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-
Round 1 - HR 

(1 Question)

  • Q1. What is ohms law
  • Ans. 

    Ohm's law states that the current flowing through a conductor is directly proportional to the voltage across it, and inversely proportional to the resistance of the conductor.

    • Ohm's law is represented by the formula V = IR, where V is voltage, I is current, and R is resistance.

    • It helps in calculating the relationship between voltage, current, and resistance in an electrical circuit.

    • For example, if a circuit has a voltag...

  • Answered by AI
Round 1 - Aptitude Test 

Related to the subject you have studied in engineering

Round 2 - Group Discussion 

Related to the topic which is in news

Round 3 - One-on-one 

(1 Question)

  • Q1. Related to the previous organisation

Interview Preparation Tips

Interview preparation tips for other job seekers - Mostly questions will be asked from the field in which you have done your education and job.

Kent plc Interview FAQs

What are the top questions asked in Kent plc Electrical Commissioning Technician interview?

Some of the top questions asked at the Kent plc Electrical Commissioning Technician interview -

  1. When the 2 incomers is energized what is the status of bus ...read more
  2. What do you mean by external internal panel wiring connect...read more

Tell us how to improve this page.

Interview Questions from Similar Companies

Shell Interview Questions
4.0
 • 197 Interviews
Schlumberger Interview Questions
3.9
 • 142 Interviews
ExxonMobil Interview Questions
3.8
 • 65 Interviews
bp Interview Questions
3.8
 • 62 Interviews
Saudi Aramco Interview Questions
4.5
 • 56 Interviews
Baker Hughes Interview Questions
4.0
 • 55 Interviews
Torrent Gas Interview Questions
3.2
 • 52 Interviews
View all

Kent plc Electrical Commissioning Technician Reviews and Ratings

based on 2 reviews

5.0/5

Rating in categories

3.5

Skill development

3.5

Work-life balance

4.2

Salary

4.2

Job security

4.2

Company culture

3.5

Promotions

5.0

Work satisfaction

Explore 2 Reviews and Ratings
Electrical Engineer
13 salaries
unlock blur

₹10 L/yr - ₹20.9 L/yr

Instrumentation Technician
12 salaries
unlock blur

₹6.2 L/yr - ₹12 L/yr

Hvac Technician
9 salaries
unlock blur

₹7 L/yr - ₹10 L/yr

Electrical Technician
8 salaries
unlock blur

₹4.3 L/yr - ₹11.2 L/yr

Senior Electrical Technician
7 salaries
unlock blur

₹1.8 L/yr - ₹12.6 L/yr

Explore more salaries
Compare Kent plc with

Reliance Industries

4.0
Compare

Indian Oil Corporation

4.4
Compare

Shell

4.0
Compare

Oil And Natural Gas Corporation

4.3
Compare
Did you find this page helpful?
Yes No
write
Share an Interview