Upload Button Icon Add office photos
Engaged Employer

i

This company page is being actively managed by KEC International Team. If you also belong to the team, you can get access from here

KEC International Verified Tick

Compare button icon Compare button icon Compare

Filter interviews by

KEC International Graduate Engineer Trainee (Get) Interview Questions and Answers

Updated 9 Mar 2024

KEC International Graduate Engineer Trainee (Get) Interview Experiences

4 interviews found

Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(2 Questions)

  • Q1. How many brickes need in 1m3
  • Ans. 

    The number of bricks needed in 1m3 depends on the size of the bricks being used.

    • The number of bricks in 1m3 will vary based on the size of the bricks. Standard brick size is 190mm x 90mm x 90mm.

    • For standard size bricks, approximately 500 bricks are needed in 1m3.

    • To calculate the number of bricks needed, divide the volume of 1m3 by the volume of one brick.

  • Answered by AI
  • Q2. Fos for concrete
  • Ans. 

    Fos is a type of admixture used in concrete to improve its workability and durability.

    • Fos is a water-reducing admixture that helps in reducing the water content in concrete mixtures.

    • It improves the workability of concrete, making it easier to place and finish.

    • Fos also enhances the durability of concrete by reducing permeability and increasing strength.

    • Examples of Fos for concrete include polycarboxylate-based admixture

  • Answered by AI
Round 1 - Technical 

(1 Question)

  • Q1. Difference between generator and transformer
  • Ans. 

    Generators convert mechanical energy into electrical energy while transformers change the voltage level of electrical energy.

    • Generators produce electrical energy while transformers change the voltage level of electrical energy.

    • Generators convert mechanical energy into electrical energy while transformers do not.

    • Generators have a rotating part while transformers do not.

    • Examples of generators include hydroelectric genera...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Good behaviour of interviewer
Very supportive

Skills evaluated in this interview

Graduate Engineer Trainee (Get) Interview Questions Asked at Other Companies

asked in JBM Group
Q1. Q: 1 What is IC engine? What is the types of IC engine? Q:2 Diffe ... read more
Q2. How to check for continuity for a wire inside a wall if the start ... read more
Q3. What will be the cost of painting the wall behind me?
Q4. What happen when there is large air void in concrete?
Q5. What are the different types of concrete?
Round 1 - Technical 

(1 Question)

  • Q1. Difference between generator and transformer
  • Ans. 

    Generators convert mechanical energy into electrical energy while transformers change the voltage level of electrical energy.

    • Generators produce electrical energy while transformers change the voltage level of electrical energy.

    • Generators convert mechanical energy into electrical energy while transformers do not.

    • Generators have a rotating component while transformers do not.

    • Examples of generators include hydroelectric, ...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Good behaviour of interviewer
Very supportive

Skills evaluated in this interview

I applied via Campus Placement and was interviewed before Dec 2018. There were 4 interview rounds.

Interview Questionnaire 

6 Questions

  • Q1.  What were your elective subjects and explain your favorite subject with favorite topic?
  • Ans. 

    My elective subjects were Mechanical Engineering and Robotics. My favorite subject was Robotics with a focus on Artificial Intelligence.

    • Elective subjects: Mechanical Engineering and Robotics

    • Favorite subject: Robotics

    • Favorite topic: Artificial Intelligence

    • Enjoyed learning about programming robots to perform tasks autonomously

    • Studied algorithms for decision-making in robots

  • Answered by AI
  • Q2. Details about internship
  • Q3. What's major difference between ECE branch and EE branch?
  • Ans. 

    ECE focuses on electronics and communication systems, while EE focuses on electrical power systems.

    • ECE deals with electronic devices, circuits, and communication systems.

    • EE focuses on electrical power generation, transmission, and distribution.

    • ECE covers subjects like digital electronics, microprocessors, and communication networks.

    • EE covers subjects like power systems, electrical machines, and control systems.

    • ECE engi...

  • Answered by AI
  • Q4. Tell me something interesting about your favorite subject and topic that I don't know
  • Ans. 

    My favorite subject is computer science and my favorite topic is artificial intelligence.

    • Artificial intelligence is the simulation of human intelligence processes by machines, especially computer systems.

    • One interesting aspect of AI is machine learning, where algorithms are used to learn from and make predictions or decisions based on data.

    • AI has various applications such as natural language processing, computer vision

  • Answered by AI
  • Q5. Mini projects and final project explanation
  • Q6. My achievements and hobbies

Interview Preparation Tips

Interview preparation tips for other job seekers - As I was from Electronics background and the interviewer was from electrical background. He could ask me much questions
But some main details about the subject and some logical questions (technical) were asked
The interviewer was the best interviewer I ever faced, the guesture and way he took the interview made ne much comfortable

But as a GET/PGET salary offered from the company is bit low, if u r from NIT/IIT

KEC International interview questions for designations

 Graduate Apprentice Trainee

 (1)

 Post Graduate Trainee

 (1)

 Graduate Engineer

 (1)

 Detailing Engineer Trainee

 (1)

 Trainee

 (1)

 Quality Engineer

 (5)

 Electrical Engineer

 (3)

 Executive Engineer

 (1)

Interview questions from similar companies

I applied via Approached by Company and was interviewed before Jun 2021. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Aptitude Test 

Work and time, speed problems

Interview Preparation Tips

Topics to prepare for Larsen & Toubro Limited Graduate Engineer Trainee (Get) interview:
  • Fluid Mechanics
Interview preparation tips for other job seekers - Do wellllllllllllllllllllllllllllllllllllllllllllllllllllllllllll

I applied via Campus Placement and was interviewed before Aug 2021. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(1 Question)

  • Q1. IS CODE provisions and methods for concrete mix
  • Ans. 

    IS Code provisions and methods for concrete mix

    • IS 456:2000 is the code for plain and reinforced concrete

    • IS 10262:2009 is the code for concrete mix design

    • Proportions of cement, sand, and aggregates are specified in the code

    • Water-cement ratio, workability, and compressive strength are also specified

    • Methods for mixing, transporting, placing, and curing of concrete are given

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Be strong with your Construction related theory

I applied via Campus Placement and was interviewed before Aug 2021. There were 2 interview rounds.

Round 1 - Aptitude Test 

Verbal and reasoning questions

Round 2 - Technical 

(1 Question)

  • Q1. Civil engineering questions

Interview Preparation Tips

Interview preparation tips for other job seekers - Prepare well with technical knowledge and experience will help you.

Interview Questionnaire 

2 Questions

  • Q1. Give name of first 20 elements of periodic table
  • Ans. 

    The first 20 elements of the periodic table are essential building blocks of matter.

    • The first element is Hydrogen (H)

    • The second element is Helium (He)

    • The third element is Lithium (Li)

    • The fourth element is Beryllium (Be)

    • The fifth element is Boron (B)

    • The sixth element is Carbon (C)

    • The seventh element is Nitrogen (N)

    • The eighth element is Oxygen (O)

    • The ninth element is Fluorine (F)

    • The tenth element is Neon (Ne)

    • The eleventh...

  • Answered by AI
  • Q2. What is laminar flow and tubulent flow?
  • Ans. 

    Laminar flow is a smooth, orderly flow of fluid while turbulent flow is a chaotic, irregular flow.

    • Laminar flow occurs at low velocities and is characterized by layers of fluid moving parallel to each other.

    • Turbulent flow occurs at high velocities and is characterized by eddies and swirls in the fluid.

    • Laminar flow is commonly observed in blood vessels while turbulent flow is observed in rivers and oceans.

    • The transition ...

  • Answered by AI

Interview Preparation Tips

Round: Test
Experience: Good
Tips: Focus on basic
Duration: 3 hrs minutes
Total Questions: 150

Round: Group Discussion
Experience: Good
Tips: Express your Idea clearly.
Don,t go with the mass flow or change your opnion during discussion.
Give chance to other people to express their idea.
Adhere to your beliveing and strengthen your points with solid proof or example.

Round: Technical Interview
Experience: Good
Tips: Keep calm and don't get nervous.
Don't get worried if you do not know some answer.
If you don't to answer say politely that you don't know answer rather than giving wrong answer.

Skills: Technical knowledge, Problem solving capability, Communication skills, Under stress workability
College Name: SVNIT
Motivation: L&T is one of the leading company in the field of the heavy metal engineering.
It can give you good knowledge of working in the heavy metal industries.

Interview Questionnaire 

1 Question

  • Q1. Tell me about yourself?

Interview Preparation Tips

Round: Test
Experience: Most of the questions are not so difficult.
Duration: 60 minutes

Round: Technical Interview
Experience: As Iam a Electrical student, I was asked questions on Transformers(like transformer losses), Power systems, Electrical machines(two machine ratings were given and Iam asked to find which is more cost efficient), Electronics(like Adder, Subtractor, Truth Tables etc.,) and on my elective i.e New Enterprise Creation and Management(NECM).

Skill Tips: Concentrate on learning concepts and applying them for practical purposes.
College Name: NIT WARANGAL

Interview Preparation Tips

Round: Test
Experience: Questions were general aptitude ranging from analytical reasoning,verbal,quant,reading comprehension and also non verbal total time allotted was 75 minutes and there was sectional cut off for each of the sections.
Duration: 75 minutes

Round: Technical Interview
Experience: Interview was the most important pat of the selection process questions were purely technical .they asked about my project paper presented and training and gave some practical problems interview was for 45-50 minutes.
Tips: Required a good understanding of the core subjects like manufacturing and machine tools.

Round: HR Interview
Experience: HR was apart of the technical assessment itself they inquired about my background and my interest to join the company.

Skill Tips: In the interview the interviewer seemed to put stress on me in the last to judge my temperament rest was all routine type of procedure they followed. L&T is a company that looks for a candidate good in the core subjects rest things like communication and attitude comes second to them so be prepared for the interview and solve some basic aptitude questions before sitting for the company.
College Name: NIT WARANGAL

KEC International Interview FAQs

How many rounds are there in KEC International Graduate Engineer Trainee (Get) interview?
KEC International interview process usually has 1 rounds. The most common rounds in the KEC International interview process are Technical.
What are the top questions asked in KEC International Graduate Engineer Trainee (Get) interview?

Some of the top questions asked at the KEC International Graduate Engineer Trainee (Get) interview -

  1. What's major difference between ECE branch and EE bran...read more
  2. Difference between generator and transfor...read more
  3. How many brickes need in ...read more

Tell us how to improve this page.

KEC International Graduate Engineer Trainee (Get) Interview Process

based on 2 interviews

1 Interview rounds

  • Technical Round
View more
KEC International Graduate Engineer Trainee (Get) Salary
based on 19 salaries
₹1 L/yr - ₹6 L/yr
9% less than the average Graduate Engineer Trainee (Get) Salary in India
View more details

KEC International Graduate Engineer Trainee (Get) Reviews and Ratings

based on 9 reviews

3.3/5

Rating in categories

3.4

Skill development

3.4

Work-life balance

3.0

Salary

3.4

Job security

3.4

Company culture

2.9

Promotions

3.0

Work satisfaction

Explore 9 Reviews and Ratings
Assistant Manager
658 salaries
unlock blur

₹5.2 L/yr - ₹21.9 L/yr

Senior Engineer
444 salaries
unlock blur

₹4.7 L/yr - ₹14 L/yr

Civil Engineer
220 salaries
unlock blur

₹2.4 L/yr - ₹9 L/yr

Project Engineer
214 salaries
unlock blur

₹3 L/yr - ₹11 L/yr

Safety Officer
191 salaries
unlock blur

₹1.8 L/yr - ₹8 L/yr

Explore more salaries
Compare KEC International with

Larsen & Toubro Limited

3.9
Compare

L&T Construction

4.0
Compare

Tata Projects

4.2
Compare

Kalpataru Projects International

4.1
Compare
Did you find this page helpful?
Yes No
write
Share an Interview