Jyoti CNC Automation Quaity Control Engineer Interview Questions and Answers

Q1. Which material marking cylinder
Ans. 
Material marking cylinders are tools used for marking or engraving materials in various engineering applications.
• Used in manufacturing for marking parts with identification numbers.

• Commonly made from durable materials like steel or aluminum.

• Examples include engraving cylinders for metal parts or rubber stamps for softer materials.

• Can be used in automated systems for high-speed marking.
Answered by AI
Add your answer
Q2. Which type of material making for bolier
Ans. 
Boilers are typically made from materials like steel, cast iron, and copper, chosen for their strength and heat resistance.
• Steel: Commonly used for its high strength and ability to withstand high pressures.

• Cast Iron: Known for excellent heat retention and durability, often used in residential boilers.

• Copper: Used in some boiler designs for its excellent thermal conductivity, though less common due to cost.
Answered by AI
Add your answer

Q1. What is difference between RTD and thermocouple used
Ans. 
RTD measures temperature using resistance change, while thermocouple uses voltage change.
• RTD stands for Resistance Temperature Detector, while thermocouple generates voltage based on temperature difference.

• RTDs are more accurate and stable compared to thermocouples.

• RTDs have higher initial cost but lower long-term maintenance cost.

• Thermocouples are more rugged and can withstand higher temperatures than RTDs.

• Example: RT...read more
Answered by AI
Add your answer
Q2. What is the PLC and DCS system
Ans. 
PLC and DCS systems are control systems used in industrial automation to monitor and control processes.
• PLC stands for Programmable Logic Controller, used for controlling machinery and processes in manufacturing.

• DCS stands for Distributed Control System, used for controlling complex processes across multiple locations.

• PLCs are typically used for discrete control applications, while DCS systems are used for continuous co...read more
Answered by AI
Add your answer
Q3. What is the AC And DC drive
Ans. 
AC and DC drives are types of electrical drives used to control the speed and torque of electric motors.
• AC drive controls the speed of an AC motor by varying the frequency of the electrical supply.

• DC drive controls the speed of a DC motor by varying the voltage supplied to the motor.

• AC drives are more commonly used in industrial applications due to their efficiency and flexibility.

• DC drives are often used in applicatio...read more
Answered by AI
Add your answer
Q4. What do you understand by 4 wire and 2 wire
Ans. 
4 wire and 2 wire are configurations used in electrical circuits for measuring resistance.
• 4 wire configuration is used for accurate resistance measurements by eliminating lead resistance

• 2 wire configuration is simpler but less accurate due to lead resistance affecting measurements

• Examples: 4 wire used in precision instruments like multimeters, 2 wire used in basic circuit testing
Answered by AI
Add your answer

Basic aptitude test that covers most aptitude topics.

GD round with general topics.

Q1. Technical round that covers basics of control valves.
Add your answer

Q1. HR round consists of basic managerial questions.
Add your answer

Q1. 7 types of qc tools
Ans. 
7 QC tools are used for quality control in manufacturing. They are simple and effective tools to identify and solve problems.
• Check sheets - used to collect data and analyze it

• Pareto charts - used to identify the most frequent problems

• Histograms - used to show the distribution of data

• Cause-and-effect diagrams - used to identify the root cause of a problem

• Flowcharts - used to show the steps in a process

• Control charts - u...read more
Answered by AI
Add your answer
Q2. What is FMEA,what are the 5s,cp vs cps different
Ans. 
FMEA is a risk assessment tool used to identify and mitigate potential failures. 5S is a workplace organization method. CP and CPS are statistical process control measures.
• FMEA stands for Failure Mode and Effects Analysis. It is a systematic approach to identifying and mitigating potential failures in a process or product.

• 5S is a workplace organization method that involves sorting, simplifying, sweeping, standardizing,...read more
Answered by AI
Add your answer
Q3. What is the ctq and ctc
Ans. 
CTQ stands for Critical to Quality and CTC stands for Critical to Customer.
• CTQ is a measurable characteristic of a product or process that is important to the customer.

• CTC is a measurable characteristic of a product or process that directly impacts customer satisfaction.

• Identifying CTQs and CTCs helps in improving the quality of the product or process.

• Examples of CTQs and CTCs include product reliability, on-time deliv...read more
Answered by AI
Add your answer
Q4. What are the different gauges
Ans. 
Gauges are instruments used to measure various physical quantities. There are different types of gauges for different purposes.
• Pressure gauges measure pressure of fluids or gases

• Temperature gauges measure temperature of substances

• Thickness gauges measure thickness of materials

• Wire gauges measure diameter of wires

• Bore gauges measure diameter of holes

• Thread gauges measure pitch and diameter of screws

• Fuel gauges measure f
Answered by AI
Add your answer
Q5. What are the instrument handling
Ans. 
Instrument handling refers to the proper use, care, and maintenance of tools and equipment used in a particular field.
• Properly clean and sterilize instruments before and after use

• Handle instruments with care to prevent damage or contamination

• Store instruments in a safe and organized manner

• Regularly inspect instruments for wear and tear

• Follow manufacturer's instructions for use and maintenance

• Examples: surgical instrume
Answered by AI
Add your answer
Q6. Do you know the GD&T symbols
Ans. 
Yes, I am familiar with GD&T symbols.
• GD&T stands for Geometric Dimensioning and Tolerancing

• It is a system of symbols used to specify the dimensions and tolerances of a part

• Examples of symbols include concentricity, perpendicularity, and flatness
Answered by AI
Add your answer

Contains MCQ of 30 technical question and 30 aptitude

General topic

Q1. Questions from resume especially from Area of interest
Add your answer

Q1. Tell me about yourself.
Add your answer

Q1. Strength and weakness About company
Add your answer

Simple Aptitude test

Around 10 people per group

Q1. Mostly Technical and from Resume
Add your answer

Q1. More of "Fit for company" questions
Add your answer

Q1. Past experience
Add your answer
Q2. Related questions
Add your answer

Q1. What is standard drill angle
Add your answer