Upload Button Icon Add office photos
Engaged Employer

i

This company page is being actively managed by Thermax Limited Team. If you also belong to the team, you can get access from here

Thermax Limited Verified Tick

Compare button icon Compare button icon Compare

Filter interviews by

Thermax Limited Junior Engineer Interview Questions, Process, and Tips

Updated 8 Aug 2024

Top Thermax Limited Junior Engineer Interview Questions and Answers

Thermax Limited Junior Engineer Interview Experiences

2 interviews found

Junior Engineer Interview Questions & Answers

user image RAVI NANDAN SAMAD

posted on 8 Aug 2024

Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Naukri.com and was interviewed in Feb 2024. There was 1 interview round.

Round 1 - Technical 

(4 Questions)

  • Q1. What is difference between RTD and thermocouple used
  • Ans. 

    RTD measures temperature using resistance change, while thermocouple uses voltage change.

    • RTD stands for Resistance Temperature Detector, while thermocouple generates voltage based on temperature difference.

    • RTDs are more accurate and stable compared to thermocouples.

    • RTDs have higher initial cost but lower long-term maintenance cost.

    • Thermocouples are more rugged and can withstand higher temperatures than RTDs.

    • Example: RT...

  • Answered by AI
  • Q2. What is the PLC and DCS system
  • Ans. 

    PLC and DCS systems are control systems used in industrial automation to monitor and control processes.

    • PLC stands for Programmable Logic Controller, used for controlling machinery and processes in manufacturing.

    • DCS stands for Distributed Control System, used for controlling complex processes across multiple locations.

    • PLCs are typically used for discrete control applications, while DCS systems are used for continuous co...

  • Answered by AI
  • Q3. What is the AC And DC drive
  • Ans. 

    AC and DC drives are types of electrical drives used to control the speed and torque of electric motors.

    • AC drive controls the speed of an AC motor by varying the frequency of the electrical supply.

    • DC drive controls the speed of a DC motor by varying the voltage supplied to the motor.

    • AC drives are more commonly used in industrial applications due to their efficiency and flexibility.

    • DC drives are often used in applicatio...

  • Answered by AI
  • Q4. What do you understand by 4 wire and 2 wire
  • Ans. 

    4 wire and 2 wire are configurations used in electrical circuits for measuring resistance.

    • 4 wire configuration is used for accurate resistance measurements by eliminating lead resistance

    • 2 wire configuration is simpler but less accurate due to lead resistance affecting measurements

    • Examples: 4 wire used in precision instruments like multimeters, 2 wire used in basic circuit testing

  • Answered by AI

Skills evaluated in this interview

Interview experience
4
Good
Difficulty level
Hard
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Company Website and was interviewed in Dec 2022. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(2 Questions)

  • Q1. Technically about company like safety..
  • Q2. What is 5s and devine
  • Ans. 

    5S is a methodology used to organize and maintain a clean and efficient workplace.

    • 5S stands for Sort, Set in Order, Shine, Standardize, and Sustain.

    • It involves organizing and labeling tools and materials, cleaning and maintaining equipment, and creating a culture of continuous improvement.

    • Example: A factory implementing 5S might label all tools and materials, create a designated storage area for each item, and regularl...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Well i am saying for job seeker. Never give up and try very hardly believe in your self

Junior Engineer Interview Questions Asked at Other Companies

asked in Tata Steel
Q1. What is the main role of Junior engineer in Electrical maintenanc ... read more
asked in JSW Steel
Q2. Buchhlz relay, what is relay, what is sensor, you read or not ele ... read more
Q3. If reactor pressure or synthesis pressure increases then how to b ... read more
Q4. What is the thickness of motar used in brickwork (vertical/horizo ... read more
Q5. What is quality,how many types of quality.5s kaizen,gd&t & ... read more

Interview questions from similar companies

I applied via Naukri.com and was interviewed before May 2020. There was 1 interview round.

Interview Questionnaire 

1 Question

  • Q1. Write the equation for dynamics and wave spectra equations. I do not remember questions as it is 3 years back.

Interview Preparation Tips

Interview preparation tips for other job seekers - This happened in Technip FMC Hyderabad, India. I hold 10 years experience. Interviewers don not know what to get from the candidates. The panel tried to prove within themselves that can ask difficult questions. The even entered to doctorate level questions which is not valid for performing job. Finally, I conclude that they performed some time-pass session.

I applied via Walk-in and was interviewed before Apr 2021. There was 1 interview round.

Round 1 - Technical 

(1 Question)

  • Q1. Explain Compilation process steps?
  • Ans. 

    Compilation process involves several steps to convert source code into executable code.

    • Preprocessing: Includes header file inclusion, macro expansion, and conditional compilation.

    • Compilation: Translates source code into assembly code.

    • Assembly: Converts assembly code into machine code.

    • Linking: Combines object files and libraries to create an executable file.

    • Loading: Loads the executable file into memory and prepares it

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Prepare well prior the interview, revise all the basic concepts of Embedded C and MATLAB if you have applied for embedded systems.

I applied via Referral and was interviewed before Jun 2020. There were 3 interview rounds.

Interview Questionnaire 

1 Question

  • Q1. Questions on Process,Simulation, CAD

Interview Preparation Tips

Interview preparation tips for other job seekers - Be confident

I applied via Recruitment Consultant and was interviewed in Mar 2020. There were 4 interview rounds.

Interview Questionnaire 

1 Question

  • Q1. Questions were related to the post John Deere were offering to candidates. For me it was Diagnostics Author position.

Interview Preparation Tips

Interview preparation tips for other job seekers - Always be aware that answer as simple as you can.
If you don't know the answer don't try to attempt simply say that you don't know and assure interviewer that if you ll get a chance you will definitely answer that.

Be optimistic and attentive.
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Naukri.com and was interviewed in Apr 2023. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(1 Question)

  • Q1. Most interview question based on resume only. And related oil and gas industry.
Round 3 - HR 

(1 Question)

  • Q1. Salary discussion

Interview Preparation Tips

Topics to prepare for TechnipFMC Senior Engineer interview:
  • API 6A
  • Subsea
  • Pressure Handling
Interview preparation tips for other job seekers - Go with confidence
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
6-8 weeks
Result
Selected Selected

I applied via Naukri.com and was interviewed in Sep 2023. There was 1 interview round.

Round 1 - Technical 

(2 Questions)

  • Q1. Basic Geotechnical questions
  • Q2. Piling Design, Shallow Foundation Design, International Codes for subsea structure foundation designs.

Interview Preparation Tips

Interview preparation tips for other job seekers - Basic Design knowledge should be must.
Interview experience
3
Average
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Referral and was interviewed in Nov 2023. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - HR 

(1 Question)

  • Q1. What is your highest qualification
  • Ans. 

    My highest qualification is a Master's degree in Electrical Engineering.

    • Master's degree in Electrical Engineering

    • Specialized in power systems

    • Thesis focused on renewable energy integration

    • Completed advanced courses in control systems

    • Published research papers in IEEE conferences

  • Answered by AI
Round 3 - Technical 

(1 Question)

  • Q1. What is your role and responsibilities in the project quality?
  • Ans. 

    As a Senior Engineer, my role in project quality is to ensure that all deliverables meet the required standards and specifications.

    • Developing and implementing quality assurance processes and procedures

    • Conducting regular audits and inspections to identify any quality issues

    • Collaborating with cross-functional teams to address and resolve quality concerns

    • Creating and maintaining quality documentation, including test plans...

  • Answered by AI

I applied via Recruitment Consultant and was interviewed in Mar 2021. There were 3 interview rounds.

Interview Questionnaire 

4 Questions

  • Q1. How types of welding?
  • Ans. 

    There are several types of welding including MIG, TIG, Stick, and Flux-Cored welding.

    • MIG welding uses a wire electrode and a shielding gas to join two pieces of metal together.

    • TIG welding uses a tungsten electrode and a filler metal to create a strong weld.

    • Stick welding uses a consumable electrode coated in flux to create a strong bond.

    • Flux-Cored welding uses a wire electrode with a flux core to create a protective shi

  • Answered by AI
  • Q2. Difference b/w 1st angle & 3rd angle projection?
  • Ans. 

    1st angle projection is used in Europe & 3rd angle projection is used in North America. They differ in placement of views.

    • 1st angle projection places the object in front of the viewing plane while 3rd angle projection places the object behind the viewing plane.

    • In 1st angle projection, the top view is placed below the front view while in 3rd angle projection, the top view is placed above the front view.

    • 1st angle project...

  • Answered by AI
  • Q3. Why u are leaving your past company
  • Q4. What is meant by six sigma
  • Ans. 

    Six Sigma is a data-driven methodology used to improve business processes by reducing defects and variability.

    • Six Sigma aims to achieve a level of quality where the probability of defects is extremely low.

    • It involves a structured approach to problem-solving using statistical analysis.

    • The methodology uses a set of tools and techniques such as DMAIC (Define, Measure, Analyze, Improve, Control) and statistical process con...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Overall it is good, always concentrate on core welding concepts

Thermax Limited Interview FAQs

How many rounds are there in Thermax Limited Junior Engineer interview?
Thermax Limited interview process usually has 1-2 rounds. The most common rounds in the Thermax Limited interview process are Technical and Resume Shortlist.
What are the top questions asked in Thermax Limited Junior Engineer interview?

Some of the top questions asked at the Thermax Limited Junior Engineer interview -

  1. What is difference between RTD and thermocouple u...read more
  2. What do you understand by 4 wire and 2 w...read more
  3. What is the PLC and DCS sys...read more

Tell us how to improve this page.

Thermax Limited Junior Engineer Interview Process

based on 3 interviews

Interview experience

4.3
  
Good
View more
Thermax Limited Junior Engineer Salary
based on 38 salaries
₹2.2 L/yr - ₹4.6 L/yr
10% less than the average Junior Engineer Salary in India
View more details

Thermax Limited Junior Engineer Reviews and Ratings

based on 11 reviews

3.5/5

Rating in categories

3.4

Skill development

3.6

Work-life balance

3.1

Salary

3.3

Job security

3.3

Company culture

3.3

Promotions

3.5

Work satisfaction

Explore 11 Reviews and Ratings
Shift Incharge
303 salaries
unlock blur

₹2.7 L/yr - ₹10.5 L/yr

Assistant Manager
277 salaries
unlock blur

₹5.8 L/yr - ₹16 L/yr

Electrical Engineer
231 salaries
unlock blur

₹2.4 L/yr - ₹7.2 L/yr

Senior Executive
211 salaries
unlock blur

₹4 L/yr - ₹11 L/yr

Control Room Engineer
196 salaries
unlock blur

₹2.5 L/yr - ₹7 L/yr

Explore more salaries
Compare Thermax Limited with

John Deere

4.1
Compare

Cummins

4.3
Compare

ABB

4.1
Compare

KONE

4.1
Compare
Did you find this page helpful?
Yes No
write
Share an Interview