Upload Button Icon Add office photos
Engaged Employer

i

This company page is being actively managed by Jyoti CNC Automation Team. If you also belong to the team, you can get access from here

Jyoti CNC Automation Verified Tick

Compare button icon Compare button icon Compare

Filter interviews by

Jyoti CNC Automation Engineer Interview Questions and Answers

Updated 9 Aug 2024

Jyoti CNC Automation Engineer Interview Experiences

1 interview found

Engineer Interview Questions & Answers

user image Anonymous

posted on 9 Aug 2024

Interview experience
1
Bad
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Walk-in and was interviewed before Aug 2023. There was 1 interview round.

Round 1 - One-on-one 

(2 Questions)

  • Q1. Basics of Geometric Dimensioning & Tolrencing
  • Q2. Basic knowledge of Hydraulic pneumatic component

Interview Preparation Tips

Interview preparation tips for other job seekers - If you are an engineer then, don't go for any other role than Design Engineer in Design Department in R&D centre. If you go to Development Component Department then, you are done. They will hire you first and then, send you to machine operating job for more than a year in the name of "getting familiar". And then, there is no guarantee that they'll take you back in office roles. A year of career wasted.

Interview questions from similar companies

Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Company Website and was interviewed in Feb 2023. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - One-on-one 

(6 Questions)

  • Q1. 7 types of qc tools
  • Ans. 

    7 QC tools are used for quality control in manufacturing. They are simple and effective tools to identify and solve problems.

    • Check sheets - used to collect data and analyze it

    • Pareto charts - used to identify the most frequent problems

    • Histograms - used to show the distribution of data

    • Cause-and-effect diagrams - used to identify the root cause of a problem

    • Flowcharts - used to show the steps in a process

    • Control charts - u...

  • Answered by AI
  • Q2. What is FMEA,what are the 5s,cp vs cps different
  • Ans. 

    FMEA is a risk assessment tool used to identify and mitigate potential failures. 5S is a workplace organization method. CP and CPS are statistical process control measures.

    • FMEA stands for Failure Mode and Effects Analysis. It is a systematic approach to identifying and mitigating potential failures in a process or product.

    • 5S is a workplace organization method that involves sorting, simplifying, sweeping, standardizing,...

  • Answered by AI
  • Q3. What is the ctq and ctc
  • Ans. 

    CTQ stands for Critical to Quality and CTC stands for Critical to Customer.

    • CTQ is a measurable characteristic of a product or process that is important to the customer.

    • CTC is a measurable characteristic of a product or process that directly impacts customer satisfaction.

    • Identifying CTQs and CTCs helps in improving the quality of the product or process.

    • Examples of CTQs and CTCs include product reliability, on-time deliv...

  • Answered by AI
  • Q4. What are the different gauges
  • Ans. 

    Gauges are instruments used to measure various physical quantities. There are different types of gauges for different purposes.

    • Pressure gauges measure pressure of fluids or gases

    • Temperature gauges measure temperature of substances

    • Thickness gauges measure thickness of materials

    • Wire gauges measure diameter of wires

    • Bore gauges measure diameter of holes

    • Thread gauges measure pitch and diameter of screws

    • Fuel gauges measure f

  • Answered by AI
  • Q5. What are the instrument handling
  • Ans. 

    Instrument handling refers to the proper use, care, and maintenance of tools and equipment used in a particular field.

    • Properly clean and sterilize instruments before and after use

    • Handle instruments with care to prevent damage or contamination

    • Store instruments in a safe and organized manner

    • Regularly inspect instruments for wear and tear

    • Follow manufacturer's instructions for use and maintenance

    • Examples: surgical instrume

  • Answered by AI
  • Q6. Do you know the GD&T symbols
  • Ans. 

    Yes, I am familiar with GD&T symbols.

    • GD&T stands for Geometric Dimensioning and Tolerancing

    • It is a system of symbols used to specify the dimensions and tolerances of a part

    • Examples of symbols include concentricity, perpendicularity, and flatness

  • Answered by AI

Interview Preparation Tips

Topics to prepare for Lakshmi Machine Works Junior Engineer interview:
  • Quality Control
Interview preparation tips for other job seekers - Personal details, certificate verification, experience of feeled , projects
Interview experience
4
Good
Difficulty level
Hard
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Company Website and was interviewed in Dec 2022. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(2 Questions)

  • Q1. Technically about company like safety..
  • Q2. What is 5s and devine
  • Ans. 

    5S is a methodology used to organize and maintain a clean and efficient workplace.

    • 5S stands for Sort, Set in Order, Shine, Standardize, and Sustain.

    • It involves organizing and labeling tools and materials, cleaning and maintaining equipment, and creating a culture of continuous improvement.

    • Example: A factory implementing 5S might label all tools and materials, create a designated storage area for each item, and regularl...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Well i am saying for job seeker. Never give up and try very hardly believe in your self
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Naukri.com and was interviewed in Feb 2024. There was 1 interview round.

Round 1 - Technical 

(4 Questions)

  • Q1. What is difference between RTD and thermocouple used
  • Ans. 

    RTD measures temperature using resistance change, while thermocouple uses voltage change.

    • RTD stands for Resistance Temperature Detector, while thermocouple generates voltage based on temperature difference.

    • RTDs are more accurate and stable compared to thermocouples.

    • RTDs have higher initial cost but lower long-term maintenance cost.

    • Thermocouples are more rugged and can withstand higher temperatures than RTDs.

    • Example: RT...

  • Answered by AI
  • Q2. What is the PLC and DCS system
  • Ans. 

    PLC and DCS systems are control systems used in industrial automation to monitor and control processes.

    • PLC stands for Programmable Logic Controller, used for controlling machinery and processes in manufacturing.

    • DCS stands for Distributed Control System, used for controlling complex processes across multiple locations.

    • PLCs are typically used for discrete control applications, while DCS systems are used for continuous co...

  • Answered by AI
  • Q3. What is the AC And DC drive
  • Ans. 

    AC and DC drives are types of electrical drives used to control the speed and torque of electric motors.

    • AC drive controls the speed of an AC motor by varying the frequency of the electrical supply.

    • DC drive controls the speed of a DC motor by varying the voltage supplied to the motor.

    • AC drives are more commonly used in industrial applications due to their efficiency and flexibility.

    • DC drives are often used in applicatio...

  • Answered by AI
  • Q4. What do you understand by 4 wire and 2 wire
  • Ans. 

    4 wire and 2 wire are configurations used in electrical circuits for measuring resistance.

    • 4 wire configuration is used for accurate resistance measurements by eliminating lead resistance

    • 2 wire configuration is simpler but less accurate due to lead resistance affecting measurements

    • Examples: 4 wire used in precision instruments like multimeters, 2 wire used in basic circuit testing

  • Answered by AI

Skills evaluated in this interview

I applied via Approached by Company and was interviewed in Dec 2018. There were 5 interview rounds.

Interview Questionnaire 

5 Questions

  • Q1. Question related to your study and working area with deep knowledge .
  • Q2. Iron carbon daigrame .
  • Q3. Heat treatment , composition , matallurgy etc.
  • Q4. Job related and working process related .
  • Q5. Man power realted Capacity related Welding related & situational question.

Interview Preparation Tips

Round: Resume Shortlist
Experience: First devision is mandatory in all pattern .

General Tips: Salary discussion .
Skills: Communication, Problem Solving, Leadership, Presentation Skills, Decision Making Skills
Duration: <1 week

I applied via Recruitment Consultant and was interviewed in Aug 2020. There were 4 interview rounds.

Interview Questionnaire 

3 Questions

  • Q1. Besic knowledge of PLC
  • Q2. Process of the power plan
  • Ans. 

    The power plant process involves converting fuel into electricity through various stages.

    • Fuel is burned to produce heat

    • Heat is used to create steam

    • Steam turns a turbine

    • Turbine generates electricity

    • Electricity is sent to the grid for distribution

  • Answered by AI
  • Q3. PID

Interview Preparation Tips

Interview preparation tips for other job seekers - Be positive be true

Interview Questionnaire 

1 Question

  • Q1. General deatail, previous job profile,

I applied via Naukri.com and was interviewed in Mar 2021. There were 3 interview rounds.

Interview Questionnaire 

1 Question

  • Q1. More of my technical

Interview Preparation Tips

Interview preparation tips for other job seekers - Be strong in own platform basics. Without base a building can't stay well..

I applied via Recruitment Consulltant and was interviewed in Oct 2020. There were 5 interview rounds.

Interview Questionnaire 

4 Questions

  • Q1. Basic of fabrication, materials welding processes, distortion control methods, lifting techniques
  • Q2. Telephonic conversation regarding basics of welding and material properties
  • Q3. Interview with a panel of 4 judges
  • Q4. Salary negotiation notice period etc

Interview Preparation Tips

Interview preparation tips for other job seekers - Be prepared. Be honest. Say no if you don't know the answer instead of guessing or pretending
Round 1 - Technical 

(1 Question)

  • Q1. Basic electric questions and PLC programming
Round 2 - Technical 

(1 Question)

  • Q1. Based on your project

Interview Preparation Tips

Interview preparation tips for other job seekers - More question will be on your project for experience people

Jyoti CNC Automation Interview FAQs

How many rounds are there in Jyoti CNC Automation Engineer interview?
Jyoti CNC Automation interview process usually has 1 rounds. The most common rounds in the Jyoti CNC Automation interview process are One-on-one Round.
What are the top questions asked in Jyoti CNC Automation Engineer interview?

Some of the top questions asked at the Jyoti CNC Automation Engineer interview -

  1. Basics of Geometric Dimensioning & Tolrenc...read more
  2. Basic knowledge of Hydraulic pneumatic compon...read more

Tell us how to improve this page.

Jyoti CNC Automation Engineer Interview Process

based on 2 interviews

Interview experience

3
  
Average
View more
Jyoti CNC Automation Engineer Salary
based on 39 salaries
₹2.7 L/yr - ₹5.1 L/yr
32% less than the average Engineer Salary in India
View more details

Jyoti CNC Automation Engineer Reviews and Ratings

based on 10 reviews

3.1/5

Rating in categories

3.8

Skill development

3.5

Work-life balance

2.9

Salary

4.7

Job security

2.7

Company culture

2.4

Promotions

2.7

Work satisfaction

Explore 10 Reviews and Ratings
Sales Engineer
68 salaries
unlock blur

₹2.2 L/yr - ₹6.5 L/yr

Design Engineer
55 salaries
unlock blur

₹2.1 L/yr - ₹7 L/yr

Assistant Manager
46 salaries
unlock blur

₹6 L/yr - ₹13.2 L/yr

Service Engineer
44 salaries
unlock blur

₹2 L/yr - ₹6 L/yr

Junior Engineer
44 salaries
unlock blur

₹1.8 L/yr - ₹3.5 L/yr

Explore more salaries
Compare Jyoti CNC Automation with

Thermax Limited

4.1
Compare

ABB

4.1
Compare

Isgec Heavy Engineering

3.8
Compare

Kirloskar Oil Engines

4.2
Compare
Did you find this page helpful?
Yes No
write
Share an Interview