Upload Button Icon Add office photos

Filter interviews by

JSW Steel Coated Products Graduate Engineer Trainee (Get) Interview Questions and Answers

Updated 28 Jan 2023

JSW Steel Coated Products Graduate Engineer Trainee (Get) Interview Experiences

1 interview found

Interview experience
4
Good
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Naukri.com and was interviewed in Dec 2022. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(2 Questions)

  • Q1. Difine Types of motor which type are motor used in steel industry
  • Ans. 

    Types of motors used in the steel industry include induction motors, synchronous motors, and DC motors.

    • Induction motors are commonly used in steel mills for driving pumps, fans, and compressors.

    • Synchronous motors are used for applications that require precise speed control, such as rolling mills.

    • DC motors are used in steel industry for applications like cranes, hoists, and rolling mills.

    • Other types of motors used in st...

  • Answered by AI
  • Q2. Types of transformer
  • Ans. 

    Transformers are electrical devices that transfer electrical energy between two or more circuits through electromagnetic induction.

    • There are several types of transformers, including power transformers, distribution transformers, autotransformers, and instrument transformers.

    • Power transformers are used to step up or step down voltage levels in power transmission and distribution systems.

    • Distribution transformers are use...

  • Answered by AI
Round 3 - HR 

(2 Questions)

  • Q1. What do you want salary for this job
  • Q2. We have no demand of salary i will agree with you as par your company policy

Interview Preparation Tips

Topics to prepare for JSW Steel Coated Products Graduate Engineer Trainee (Get) interview:
  • Basic electrical and power system
  • Abb Drives
  • Simulation
  • Siemens drive
  • Siemens PLC
  • rectifire
  • Plc programming
  • Induction Motors
  • MS Office
  • Control System
Interview preparation tips for other job seekers - In this intrview we have selection in the jsw steel

Interview questions from similar companies

Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Campus Placement and was interviewed in May 2024. There were 4 interview rounds.

Round 1 - Resume Shortlist 

(1 Question)

  • Q1. Resume shortlist (Not based on CGPA)
Round 2 - Aptitude Test 

Basic Core technical Questions

Round 3 - Group Discussion 

GD Topic - Women Empowerment, Does they should be employed only for Soft skills or they are suited for Hard skills and core field.

Round 4 - Technical 

(6 Questions)

  • Q1. Internship undergone and interrupted by questions
  • Q2. Project (Specifically in Ferrous alloys)
  • Q3. How Extraction of Zinc is done
  • Ans. 

    Zinc is extracted from its ore through a process called roasting and then electrolysis.

    • Zinc ore is first crushed and then concentrated by froth flotation.

    • The concentrated ore is then roasted in the presence of air to form zinc oxide.

    • Zinc oxide is then reduced to zinc metal using electrolysis.

    • The zinc metal is then melted and cast into ingots for further processing.

  • Answered by AI
  • Q4. Why fines are not added in Blast Furnace
  • Ans. 

    Fines are not added in Blast Furnace due to their tendency to block the flow of gases and decrease efficiency.

    • Fines have a tendency to block the flow of gases in the Blast Furnace, reducing efficiency.

    • Adding fines can lead to uneven distribution of materials and hinder the smelting process.

    • Fines can also cause issues with permeability and reduce the quality of the final product.

    • To avoid these problems, fines are usuall...

  • Answered by AI
  • Q5. Reactions in BF
  • Ans. 

    Reactions in BF refer to the chemical reactions that occur in a blast furnace during the production of iron.

    • Reactions involve the reduction of iron ore (Fe2O3) to iron (Fe) using carbon monoxide (CO) as the reducing agent.

    • Other reactions include the formation of slag from impurities in the iron ore and the reduction of other metal oxides present.

    • The overall reaction in a blast furnace can be represented as: Fe2O3 + 3CO...

  • Answered by AI
  • Q6. Difference of Iron making and Steel Making
  • Ans. 

    Iron making involves extracting iron from iron ore, while steel making involves refining iron into steel.

    • Iron making involves processes like blast furnace and direct reduction, while steel making involves processes like basic oxygen furnace and electric arc furnace.

    • Iron making typically produces pig iron, while steel making produces various grades of steel.

    • Iron making is the first step in the production of steel, as st...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Be strong in Basic of your core field, Mine is Metallurgy
Be bold and speak correct answers, Not blabbering
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
2-4 weeks
Result
-

I applied via Campus Placement and was interviewed in Jul 2024. There were 3 interview rounds.

Round 1 - Assignment 

25 mechanical question

Round 2 - Technical 

(5 Questions)

  • Q1. About internship
  • Q2. First angle and third angel projection, trim
  • Q3. Heat treatment process
  • Q4. Safety procedure while working in site
  • Ans. 

    Safety procedures on site are crucial for preventing accidents and injuries.

    • Always wear appropriate personal protective equipment (PPE) such as hard hats, safety goggles, and gloves.

    • Follow all safety guidelines and protocols set by the company or site supervisor.

    • Regularly inspect and maintain tools and equipment to ensure they are in good working condition.

    • Attend safety training sessions to stay updated on best practic...

  • Answered by AI
  • Q5. About college project and internship experience
Round 3 - Group Discussion 

Separately given chance to everyone to spoke

Interview Preparation Tips

Interview preparation tips for other job seekers - We are totally 20 people from different university attended interview in AP office, all 20 are allowed to atten test, GD, technical and HR interview

I applied via Campus Placement and was interviewed in Jul 2021. There was 1 interview round.

Round 1 - Technical 

(2 Questions)

  • Q1. Types of bearing Types of valves Where do we use bearings
  • Ans. 

    Bearings are used to reduce friction and support rotating or moving parts in machinery.

    • There are several types of bearings, including ball bearings, roller bearings, and plain bearings.

    • Ball bearings use balls to reduce friction between the moving parts.

    • Roller bearings use cylindrical rollers to support heavy loads.

    • Plain bearings have a sliding surface and are used in applications where low friction is required.

    • Other ty...

  • Answered by AI
  • Q2. Types of bearing Types of pumps Types of valves Casting techniques
  • Ans. 

    Types of bearings include ball, roller, plain, and thrust. Types of pumps include centrifugal, positive displacement, and axial flow. Types of valves include gate, globe, ball, and butterfly. Casting techniques include sand casting, investment casting, and die casting.

    • Types of bearings: ball, roller, plain, thrust

    • Types of pumps: centrifugal, positive displacement, axial flow

    • Types of valves: gate, globe, ball, butterfly

    • ...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Good workplace to work but do not Go if you want respect from others

I applied via Campus Placement and was interviewed in Aug 2021. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - One-on-one 

(1 Question)

  • Q1. Type of value , comparison between four stroke and two strokes engine
  • Ans. 

    Four-stroke and two-stroke engines differ in their operating cycles and efficiency.

    • Four-stroke engines have separate intake, compression, power, and exhaust strokes, while two-stroke engines combine these strokes.

    • Four-stroke engines are more fuel-efficient and produce less pollution compared to two-stroke engines.

    • Two-stroke engines have a simpler design and are lighter, making them suitable for applications where weigh...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - While writing a mail u should be given the updated resume to company . And in subject you should mention the job role which for you are applying .
And in compose section you should mention your skils .

I applied via Campus Placement

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Aptitude Test 

Basic quant, verbal and reasoning.
Also questions from my domain related wrt my branch

Round 3 - Group Discussion 

Informative GD with general topic

Round 4 - HR 

(1 Question)

  • Q1. Self introduction and domain related basic to in depth

Interview Preparation Tips

Interview preparation tips for other job seekers - Start to learn from basics and try to be strong with what you learnt.
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Campus Placement and was interviewed in Jul 2022. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Aptitude Test 

Simple question where asked related to time, distance speed, and graph

Round 3 - Technical 

(2 Questions)

  • Q1. Questions were related to heat transfer, som and thermodynamics and l casting process and few questions related to industrial engineering
  • Q2. And they also asked fluid questions too

Interview Preparation Tips

Interview preparation tips for other job seekers - Interview was totally technical, they asked me mostly question from som, euler equation , maximum bending in a beam

I applied via Campus Placement and was interviewed before Apr 2021. There were 3 interview rounds.

Round 1 - Aptitude Test 

It consists quant , english and technical questions

Round 2 - Group Discussion 

The topic of group discussion was internet curbing our mind .

Round 3 - One-on-one 

(1 Question)

  • Q1. Technical question and life related questions .

Interview Preparation Tips

Interview preparation tips for other job seekers - prepare yourself very well and never try to convince with wrong answers.
Interview experience
3
Average
Difficulty level
Moderate
Process Duration
-
Result
Selected Selected

I applied via Campus Placement and was interviewed in Jun 2022. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Properly align and format text in your resume. A recruiter will have to spend more time reading poorly aligned text, leading to high chances of rejection.
View all tips
Round 2 - Aptitude Test 

There are 60 questions for 60 minutes.

Round 3 - Technical 

(2 Questions)

  • Q1. Based on your last year project.
  • Q2. Based on which department you have to choosen.

Interview Preparation Tips

Interview preparation tips for other job seekers - Overall experience was moderate level and mainly questions based on your precious academic project.
Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - HR 

(2 Questions)

  • Q1. Few General Questions
  • Q2. Family details ,Education Details

Interview Preparation Tips

Interview preparation tips for other job seekers - Stick to your answers and Always try to get the best plant like karakola,Kamanda rather the barbil plant

JSW Steel Coated Products Interview FAQs

How many rounds are there in JSW Steel Coated Products Graduate Engineer Trainee (Get) interview?
JSW Steel Coated Products interview process usually has 3 rounds. The most common rounds in the JSW Steel Coated Products interview process are Resume Shortlist, Technical and HR.
What are the top questions asked in JSW Steel Coated Products Graduate Engineer Trainee (Get) interview?

Some of the top questions asked at the JSW Steel Coated Products Graduate Engineer Trainee (Get) interview -

  1. difine Types of motor which type are motor used in steel indus...read more
  2. types of transfor...read more
  3. we have no demand of salary i will agree with you as par your company pol...read more

Tell us how to improve this page.

JSW Steel Coated Products Graduate Engineer Trainee (Get) Interview Process

based on 2 interviews

Interview experience

4.5
  
Good
View more
JSW Steel Coated Products Graduate Engineer Trainee (Get) Salary
based on 8 salaries
₹5.5 L/yr - ₹8 L/yr
83% more than the average Graduate Engineer Trainee (Get) Salary in India
View more details

JSW Steel Coated Products Graduate Engineer Trainee (Get) Reviews and Ratings

based on 5 reviews

2.3/5

Rating in categories

2.7

Skill development

2.0

Work-life balance

3.0

Salary

4.2

Job security

2.2

Company culture

3.0

Promotions

2.1

Work satisfaction

Explore 5 Reviews and Ratings
Assistant Manager
129 salaries
unlock blur

₹4.2 L/yr - ₹10.9 L/yr

Junior Engineer
91 salaries
unlock blur

₹3 L/yr - ₹5.5 L/yr

Deputy Manager
61 salaries
unlock blur

₹6 L/yr - ₹15.2 L/yr

Manager
30 salaries
unlock blur

₹8.9 L/yr - ₹22 L/yr

Junior Manager
20 salaries
unlock blur

₹5.1 L/yr - ₹7.8 L/yr

Explore more salaries
Compare JSW Steel Coated Products with

JSW Bhushan Power & Steel

4.0
Compare

Steel Strips Wheels

3.7
Compare

Rockman Industries

3.8
Compare

Rungta Mines

4.0
Compare
Did you find this page helpful?
Yes No
write
Share an Interview