Upload Button Icon Add office photos

Jindal Steel and Power

Compare button icon Compare button icon Compare

Filter interviews by

Clear (1)

Jindal Steel and Power Production Graduate Engineer Trainee Interview Questions and Answers

Updated 18 Mar 2024

Jindal Steel and Power Production Graduate Engineer Trainee Interview Experiences

1 interview found

Interview experience
3
Average
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Not Selected

I applied via Campus Placement and was interviewed in Feb 2024. There was 1 interview round.

Round 1 - Technical 

(2 Questions)

  • Q1. Difference between pump and blower
  • Ans. 

    Pumps are used to move fluids, while blowers are used to move gases.

    • Pumps are used to increase the pressure of liquids, while blowers are used to increase the pressure of gases.

    • Pumps are typically used in applications such as water supply, irrigation, and sewage systems.

    • Blowers are commonly used in applications like ventilation systems, pneumatic conveying, and combustion processes.

  • Answered by AI
  • Q2. Difference between milling and lathe machine
  • Ans. 

    Milling machine is used to remove material from a workpiece by feeding the workpiece against a rotating cutter. Lathe machine is used to rotate the workpiece against a cutting tool to remove material.

    • Milling machine uses a rotating cutter to remove material, while lathe machine uses a cutting tool that moves across the workpiece.

    • Milling machine is typically used for cutting flat surfaces, slots, and grooves, while lath...

  • Answered by AI

Interview questions from similar companies

Interview experience
5
Excellent
Difficulty level
Hard
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Company Website and was interviewed in Nov 2022. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all Resume tips
Round 2 - Technical 

(5 Questions)

  • Q1. Shaft daimeter 40 mm wy bearings no
  • Q2. Ferro silicon melting point wy
  • Q3. Which composition is a ci casting
  • Ans. 

    CI casting refers to cast iron casting, which is made from a composition of iron, carbon, and silicon.

    • CI casting stands for cast iron casting.

    • It is made from a composition of iron, carbon, and silicon.

    • The carbon content in CI casting is typically between 2.1% and 4%.

    • The silicon content in CI casting is typically between 1% and 3%.

    • CI casting is known for its excellent castability, good machinability, and high wear resis

  • Answered by AI
  • Q4. High crome metal pouring temperature
  • Ans. 

    The pouring temperature of high chrome metal is typically between 1,600 to 1,800 degrees Celsius.

    • High chrome metal is commonly used in applications that require high temperature resistance and corrosion resistance.

    • The pouring temperature is crucial to ensure proper flow and solidification of the metal.

    • The specific pouring temperature may vary depending on the exact composition of the high chrome metal and the desired p...

  • Answered by AI
  • Q5. Maild steel campotion

Interview Questionnaire 

2 Questions

  • Q1. Fiast focus on basic knowledge, thous are you studying?
  • Q2. You mast be knowledge of computer & XL also a sap

I was interviewed before Oct 2021.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all Resume tips
Round 2 - Technical 

(5 Questions)

  • Q1. Current Transformer. Potential Transformer
  • Q2. Basic all questions Electrical Engineering
  • Q3. Basic questions all Electrical
  • Q4. Electrical Engineering
  • Q5. TRANSFORMERS Motor Gen

Interview Preparation Tips

Topics to prepare for Tata Steel Production Engineer interview:
  • Program Management
Interview preparation tips for other job seekers - Production line quality line job
Assembly line
Hard questions
Basic speech more that easily qautio
Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(2 Questions)

  • Q1. Star delta starter
  • Q2. Dol rdol starter

Interview Preparation Tips

Interview preparation tips for other job seekers - be confident while giving answer
Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-

I applied via Campus Placement and was interviewed before Jul 2023. There were 3 interview rounds.

Round 1 - Aptitude Test 

Logical reasoning and general knowledge

Round 2 - Group Discussion 

Current affairs and general affairs

Round 3 - One-on-one 

(2 Questions)

  • Q1. Related to the core subject
  • Q2. Related to matarials

Interview Preparation Tips

Interview preparation tips for other job seekers - Be confident about your answers
Interview experience
3
Average
Difficulty level
Moderate
Process Duration
-
Result
Selected Selected

I applied via Campus Placement

Round 1 - Aptitude Test 

Test contains reasoning , maths and few questions related to mechanical engineering

Round 2 - One-on-one 

(2 Questions)

  • Q1. This is a technical round in which we had interact with the senior officer of related department
  • Q2. Iron carbon diagram, material properties, college project, forging process
Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(1 Question)

  • Q1. Metallurgy relatives

Interview Preparation Tips

Interview preparation tips for other job seekers - Dont join as production engineer
Interview experience
3
Average
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Company Website and was interviewed before May 2023. There was 1 interview round.

Round 1 - HR 

(3 Questions)

  • Q1. Prove your self
  • Q2. What is your goal
  • Q3. Why you are joining our organisation

Interview Preparation Tips

Interview preparation tips for other job seekers - Please prepare our technical knowledge
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
-
Result
Selected Selected

I applied via Job Portal and was interviewed in Mar 2023. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all Resume tips
Round 2 - Technical 

(2 Questions)

  • Q1. Experience Field related question
  • Q2. Operation related question

Interview Preparation Tips

Interview preparation tips for other job seekers - Build up your knowledge regarding your field to achieve any target
Contribute & help others!
anonymous
You can choose to be anonymous

Jindal Steel and Power Interview FAQs

How many rounds are there in Jindal Steel and Power Production Graduate Engineer Trainee interview?
Jindal Steel and Power interview process usually has 1 rounds. The most common rounds in the Jindal Steel and Power interview process are Technical.
What are the top questions asked in Jindal Steel and Power Production Graduate Engineer Trainee interview?

Some of the top questions asked at the Jindal Steel and Power Production Graduate Engineer Trainee interview -

  1. Difference between milling and lathe mach...read more
  2. Difference between pump and blo...read more

Recently Viewed

PHOTOS

InsuranceDekho

3 office photos

LIST OF COMPANIES

Credit Bajaar

Overview

INTERVIEWS

Happiest Minds Technologies

No Interviews

INTERVIEWS

Happiest Minds Technologies

No Interviews

INTERVIEWS

Happiest Minds Technologies

No Interviews

CAMPUS PLACEMENT

Sanjay Gandhi Polytechnic, Bellary

INTERVIEWS

Happiest Minds Technologies

No Interviews

INTERVIEWS

Happiest Minds Technologies

No Interviews

INTERVIEWS

Happiest Minds Technologies

No Interviews

INTERVIEWS

Happiest Minds Technologies

No Interviews

Tell us how to improve this page.

Jindal Steel and Power Production Graduate Engineer Trainee Interview Process

based on 1 interview

Interview experience

3
  
Average
View more
Assistant Manager
2.2k salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Junior Engineer
1k salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Deputy Manager
977 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Assistant Engineer
763 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Manager
615 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Explore more salaries
Compare Jindal Steel and Power with

Tata Steel

4.1
Compare

JSW Steel

3.9
Compare

Steel Authority Of India

4.1
Compare

Vedanta Limited

3.8
Compare
Did you find this page helpful?
Yes No
write
Share an Interview