i
Jindal Aluminium
Filter interviews by
I was interviewed in Jan 2025.
My Name is Akash
My father name Shri Rajkishor
I am from Kushinagar ( Uttar Pradesh)
My data of birth 05/04/2005
My diploma course in mechanical engineering
My mobile no XXXXX
A diesel engine is a type of internal combustion engine that uses compression ignition to burn fuel.
Diesel engines are commonly used in trucks, buses, and some cars.
They are more fuel efficient than gasoline engines.
Diesel engines have higher torque output compared to gasoline engines.
They do not have spark plugs, instead relying on compression to ignite the fuel.
Diesel engines are known for their durability and longev
A hydraulic system is a technology that uses liquid to transmit power.
Uses incompressible fluid to generate power
Consists of a pump, valves, cylinders, and hydraulic fluid
Commonly used in heavy machinery like excavators and cranes
A 4-stroke engine is an internal combustion engine that completes four separate strokes in the combustion cycle: intake, compression, power, and exhaust.
4-stroke engines are commonly used in automobiles, motorcycles, and small engines like lawnmowers.
They are more fuel-efficient and produce less pollution compared to 2-stroke engines.
Examples of vehicles with 4-stroke engines include cars, trucks, and SUVs.
Thermal power is the energy generated from heat, typically through the combustion of fossil fuels or nuclear reactions.
Thermal power plants use steam turbines to convert heat energy into mechanical energy
Common sources of thermal power include coal, natural gas, and nuclear fuel
Thermal power generation can contribute to air pollution and greenhouse gas emissions
4-stroke engine is a type of internal combustion engine commonly used in vehicles and machinery.
4-stroke engines have four stages: intake, compression, power, and exhaust.
They are more fuel efficient and produce less emissions compared to 2-stroke engines.
Examples of vehicles with 4-stroke engines include cars, motorcycles, and trucks.
Top trending discussions
posted on 30 Oct 2024
The unit of resistance is ohm (Ω).
The unit of resistance is measured in ohms (Ω).
Resistance is denoted by the symbol 'R' in equations.
One ohm is equal to one volt per ampere (1 Ω = 1 V/A).
Current is the flow of electric charge in a circuit.
Current is the rate of flow of electric charge in a circuit.
It is measured in Amperes (A).
Current flows from positive to negative terminal in a circuit.
There are two types of current - AC (Alternating Current) and DC (Direct Current).
A magnet is an object that produces a magnetic field and attracts certain materials like iron.
A magnet has two poles - north and south.
Opposite poles attract each other while like poles repel.
Magnets can be natural (lodestone) or man-made (permanent magnets).
Transformer works on the principle of electromagnetic induction to transfer electrical energy between two or more circuits.
Transformers have two coils of wire, known as primary and secondary coils.
When an alternating current flows through the primary coil, it creates a changing magnetic field.
This changing magnetic field induces a voltage in the secondary coil, transferring electrical energy.
The ratio of the number of ...
The value of Indian frequency is 50 Hz.
The standard frequency used in India for electrical power distribution is 50 Hz.
This frequency is used for both residential and industrial purposes.
It is important for ensuring compatibility of electrical equipment and appliances.
In contrast, countries like the United States use a frequency of 60 Hz.
The unit of current is Ampere (A).
The unit of current is Ampere (A)
It is named after the French physicist Andre-Marie Ampere
Current is the flow of electric charge in a circuit
A magnetic field is a region around a magnetic material or a moving electric charge within which the force of magnetism acts.
A magnetic field is produced by moving electric charges or magnetic materials.
It exerts a force on other moving charges and magnetic materials within its vicinity.
The strength and direction of a magnetic field can be represented by magnetic field lines.
Examples include the Earth's magnetic field
The laws of resistance describe how the resistance of a material is affected by factors such as length, cross-sectional area, and temperature.
Resistance is directly proportional to the length of the material - longer materials have higher resistance.
Resistance is inversely proportional to the cross-sectional area of the material - larger cross-sectional areas have lower resistance.
Resistance increases with temperature ...
The relationship between current, voltage, and resistance is described by Ohm's Law.
Ohm's Law states that the current flowing through a conductor is directly proportional to the voltage applied across it and inversely proportional to the resistance of the conductor.
Mathematically, Ohm's Law is expressed as I = V/R, where I is the current in Amperes, V is the voltage in Volts, and R is the resistance in Ohms.
This relati...
I applied via Naukri.com and was interviewed in Jul 2024. There was 1 interview round.
Lotto is a form of gambling where players select a set of numbers in hopes of winning a prize.
Players choose a set of numbers from a predetermined range
Numbers are drawn randomly and players win prizes based on matching numbers
Popular lotto games include Powerball, Mega Millions, and EuroMillions
TNC switch stands for Terminal Network Controller switch, used in telecommunications to connect multiple devices to a network.
TNC switch is a device used in telecommunications to connect multiple devices to a network.
It acts as a central hub for communication between devices on the network.
TNC switches come in various sizes and configurations to accommodate different network setups.
Examples of TNC switches include Ethe
Three phase induction motors are commonly used in industrial applications due to their efficiency and reliability.
Three phase induction motors have three sets of windings that are spaced 120 degrees apart.
They do not require any additional starting devices and are self-starting.
Common types include squirrel cage and wound rotor induction motors.
They are widely used in industrial applications such as pumps, compressors,
VFDs (Variable Frequency Drives) are used in various applications to control the speed of electric motors by varying the frequency and voltage of the power supplied to the motor.
Used in industrial applications to control the speed of pumps, fans, compressors, and conveyor belts
Helps in energy savings by adjusting motor speed based on demand
Commonly used in HVAC systems for precise control of air flow
Improves process co
posted on 30 Jan 2025
I was interviewed in Jul 2024.
I was interviewed in Jan 2025.
I applied via Company Website and was interviewed in Dec 2023. There was 1 interview round.
The relationship between management and employees is crucial for the success of an organization, as it impacts communication, motivation, and productivity.
Open communication between management and employees fosters trust and transparency.
Effective management involves providing clear expectations, feedback, and support to employees.
A positive relationship can lead to higher employee morale, motivation, and productivity.
...
Welfare amenities are facilities provided by a company for the well-being of its employees. Grievances can be settled through open communication and fair resolution.
Welfare amenities include health insurance, gym facilities, flexible work hours, and employee assistance programs.
Settling grievances involves creating a transparent grievance redressal system, actively listening to employee concerns, and taking prompt acti...
posted on 8 Feb 2021
I applied via Recruitment Consultant and was interviewed before Feb 2020. There was 1 interview round.
posted on 13 May 2022
I applied via Naukri.com and was interviewed in Apr 2022. There were 2 interview rounds.
Refractories are materials that can withstand high temperatures and are used in furnaces, kilns, and other high-temperature applications.
Refractories are made from materials such as clay, silica, alumina, and magnesia.
They are used to line furnaces, kilns, and other high-temperature equipment to protect them from heat and corrosion.
Refractories are classified based on their chemical composition, physical properties, an...
There are three types of refractories: acidic, basic, and neutral.
Refractories are materials that can withstand high temperatures and are used in furnaces, kilns, and other high-temperature applications.
Acidic refractories are made of materials like silica and alumina and are used in acidic environments.
Basic refractories are made of materials like magnesia and dolomite and are used in basic environments.
Neutral refrac...
I was interviewed before Feb 2024.
posted on 28 Jan 2025
based on 1 interview
Interview experience
Senior Engineer
65
salaries
| ₹3.8 L/yr - ₹9 L/yr |
Senior Associate
62
salaries
| ₹3 L/yr - ₹9.5 L/yr |
Assistant Manager
59
salaries
| ₹4.6 L/yr - ₹14 L/yr |
Engineer
54
salaries
| ₹3.4 L/yr - ₹7.2 L/yr |
Deputy Manager
36
salaries
| ₹8.2 L/yr - ₹15.5 L/yr |
Hindalco Industries
Vedanta Limited
Nalco
Hindustan Zinc