Upload Button Icon Add office photos

Filter interviews by

Jhabua power Interview Questions and Answers

Updated 30 Mar 2024

Jhabua power Interview Experiences

Popular Designations

4 interviews found

Interview experience
3
Average
Difficulty level
Moderate
Process Duration
2-4 weeks
Result
Selected Selected

I applied via Approached by Company and was interviewed before Mar 2023. There were 2 interview rounds.

Round 1 - Technical 

(3 Questions)

  • Q1. Mechanical Maintenance practice related
  • Q2. Machine overhauling
  • Q3. Trouble shooting in hydraulics, pumpmaintenance and valve maintenance.
  • Ans. 

    Troubleshooting in hydraulics, pump maintenance, and valve maintenance involves identifying and resolving issues with hydraulic systems and their components.

    • Identify common issues such as leaks, low pressure, and overheating in hydraulic systems.

    • Inspect pump components for wear and tear, and replace or repair as needed.

    • Check valves for proper functioning and adjust or replace if necessary.

    • Use diagnostic tools like pres...

  • Answered by AI
Round 2 - One-on-one 

(2 Questions)

  • Q1. Case studies on turbine and Generator
  • Q2. Troubleshooting on pumps
  • Ans. 

    Troubleshooting on pumps involves identifying and resolving issues with the operation of pumps.

    • Check for any leaks in the pump system

    • Inspect the pump motor for any signs of damage or malfunction

    • Verify that the pump is receiving adequate power supply

    • Clean or replace clogged filters or strainers

    • Check for any air pockets in the pump system

    • Ensure that the pump is properly lubricated

    • Consult the pump manual for troubleshooti

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Should have good process and technical knowledge.

Deputy Manager Interview Questions asked at other Companies

Q1. 1.WHAT IS SPECIAL OF UR HOME TOWN 2.Who is Main compitetor with us and which products...3.what is main business in your area and its functions...4 Previous comoany achevements 5.Your strengts and weakness.
View answer (69)

I applied via Approached by Company and was interviewed in Apr 2022. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Aptitude Test 

Any question in WTP area

Interview Preparation Tips

Interview preparation tips for other job seekers - I am anjani kumar Tiwari, my post in CPU operator. My experience is 1 year 10 month

Interview Questionnaire 

1 Question

  • Q1. CHP Area all equipment,, working process..

Interview Preparation Tips

Interview preparation tips for other job seekers - Not explain

Shift Incharge Interview Questions asked at other Companies

Q1. Tell me about power factor and how to keep always .80?
View answer (5)

I applied via Naukri.com and was interviewed in Mar 2021. There was 1 interview round.

Interview Questionnaire 

1 Question

  • Q1. How to find out inductance value of motor and pi value of transformer
  • Ans. 

    Inductance value of motor and pi value of transformer can be found using different methods.

    • Inductance value of motor can be found using LCR meter or by measuring the voltage and current waveforms and calculating the inductance using mathematical formulas.

    • Pi value of transformer can be found by measuring the open circuit voltage and short circuit current and using the formula Pi = (open circuit voltage / short circuit c...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Only technician questions asked client

Senior Electrical Engineer Interview Questions asked at other Companies

Q1. 1. What IEC standard you are using for designing the panels, for selection of switchgear.
View answer (1)

Jhabua power interview questions for popular designations

 Senior Electrical Engineer

 (1)

 Water Treatment Plant Chemist and Operator

 (1)

 Shift Incharge

 (1)

 Deputy Manager

 (1)

Interview questions from similar companies

I applied via Company Website and was interviewed before Aug 2021. There was 1 interview round.

Round 1 - One-on-one 

(1 Question)

  • Q1. Dfig system,power electronics equipments and usage,resume justification,power system transient,power flow,yaw,pitch system,generators,motors thermal loading of generators,capability curve

Interview Preparation Tips

Interview preparation tips for other job seekers - Good experience of knowledge development in interview only

I applied via Approached by Company and was interviewed before Oct 2021. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(3 Questions)

  • Q1. About solar technical
  • Q2. About communication skills
  • Q3. About your knowledge

Interview Preparation Tips

Topics to prepare for UTL Solar Sales Executive interview:
  • Solar installations
  • solar designs
Interview preparation tips for other job seekers - Pls prepared for technical query related to solar fields.

I applied via Naukri.com and was interviewed in Jun 2021. There was 1 interview round.

Interview Questionnaire 

3 Questions

  • Q1. What is the previous work experience.?
  • Ans. 

    I have 5 years of experience in sales, working for a leading technology company.

    • Worked as a Sales Executive for XYZ Technology for 5 years

    • Managed a portfolio of key accounts and consistently exceeded sales targets

    • Developed and maintained strong relationships with clients, resulting in repeat business

    • Collaborated with cross-functional teams to develop and implement effective sales strategies

    • Provided excellent customer s...

  • Answered by AI
  • Q2. What is your achievements?
  • Ans. 

    I have achieved consistent sales growth, exceeding targets by 20% for three consecutive years.

    • Consistently exceeded sales targets by 20% for three consecutive years

    • Developed and implemented effective sales strategies resulting in increased revenue

    • Built and maintained strong relationships with key clients, leading to repeat business

    • Received multiple awards for top sales performance

  • Answered by AI
  • Q3. How will be you achieve the target
  • Ans. 

    I will achieve the target by implementing a strategic sales plan, building strong relationships with clients, and consistently meeting and exceeding sales goals.

    • Developing a comprehensive sales strategy that includes identifying target markets, setting sales goals, and creating a plan to reach those goals.

    • Building and maintaining strong relationships with clients by providing excellent customer service, understanding t...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Be confident to answer the question
Interview experience
3
Average
Difficulty level
Easy
Process Duration
2-4 weeks
Result
Selected Selected

I appeared for an interview in Apr 2024.

Round 1 - HR 

(2 Questions)

  • Q1. About work culture
  • Q2. About technical
Round 2 - Technical 

(1 Question)

  • Q1. Related to Transformer
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
-
Result
Not Selected

I appeared for an interview in Jul 2024.

Round 1 - Technical 

(10 Questions)

  • Q1. Can you tell me about yourself?
  • Q2. What are your responsibilities in the plant?
  • Ans. 

    As a Senior Engineer in the plant, my responsibilities include overseeing operations, managing projects, ensuring compliance with regulations, and leading a team of engineers.

    • Overseeing day-to-day operations in the plant

    • Managing projects related to plant upgrades or expansions

    • Ensuring compliance with safety and environmental regulations

    • Leading and mentoring a team of engineers

    • Troubleshooting technical issues and implem

  • Answered by AI
  • Q3. Why is tan delta testing conducted in power transformers?
  • Ans. 

    Tan delta testing is conducted in power transformers to assess the insulation condition and detect any potential faults.

    • Tan delta testing helps in evaluating the insulation quality of power transformers.

    • It can detect any potential issues such as moisture, contamination, or aging of insulation materials.

    • By measuring the tan delta value, engineers can assess the dielectric losses in the transformer.

    • Regular tan delta test...

  • Answered by AI
  • Q4. What is a vector group?
  • Ans. 

    A vector group is a method used to represent the phase relationship between the primary and secondary windings of a transformer.

    • Vector group indicates the connection of transformer windings and the phase shift between them.

    • It is represented by a combination of letters and numbers, such as Yd1, Dyn11, etc.

    • Different vector groups have different phase relationships, affecting the transformer's performance and operation.

    • Ve...

  • Answered by AI
  • Q5. What should be considered when erecting an IDT (Inverter duty Transformer)?
  • Ans. 

    Considerations when erecting an IDT (Inverter duty Transformer)

    • Ensure the transformer is designed for inverter duty applications

    • Properly size the transformer based on the inverter's output power

    • Consider the harmonic content of the inverter's output when selecting the transformer

    • Provide adequate ventilation and cooling for the transformer to handle the increased heat generated by the inverter

    • Ensure proper grounding and ...

  • Answered by AI
  • Q6. What is the star-delta connection in power transformers?
  • Ans. 

    Star-delta connection is a method used in power transformers to reduce starting current and improve efficiency.

    • Star-delta connection involves connecting the primary windings of the transformer in a star configuration during starting, and then switching to a delta configuration during normal operation.

    • This method helps in reducing the starting current drawn by the transformer, which is beneficial for the power system.

    • It...

  • Answered by AI
  • Q7. What types of conductors are used in high-tension (HT) lines, and what are their current capacities?
  • Ans. 

    High-tension (HT) lines use different types of conductors with varying current capacities.

    • Types of conductors used in HT lines include aluminum, steel, and composite materials

    • Aluminum conductors are commonly used due to their lightweight and high conductivity

    • Steel conductors are used for their strength and durability

    • Composite conductors are a newer technology that offer a balance of strength and conductivity

    • Current cap...

  • Answered by AI
  • Q8. What is the distance between poles in 33KV high tension lines?
  • Ans. 

    The distance between poles in 33KV high tension lines is typically around 50-60 meters.

    • The distance between poles in high tension lines is determined by factors such as terrain, voltage level, and local regulations.

    • In general, the distance can range from 50 to 60 meters for 33KV high tension lines.

    • This distance is important to ensure proper support and insulation of the conductors between poles.

  • Answered by AI
  • Q9. What is the process of laying LT cables?
  • Ans. 

    The process of laying LT cables involves planning, trenching, laying the cables, jointing, testing, and backfilling.

    • Plan the route and depth of the trench for laying the cables.

    • Excavate the trench to the required depth and width.

    • Lay the cables in the trench, ensuring proper alignment and support.

    • Joint the cables together using appropriate connectors.

    • Test the cables for continuity and insulation resistance.

    • Backfill the ...

  • Answered by AI
  • Q10. What is the process for attaching modules?
  • Ans. 

    The process for attaching modules involves identifying connection points, aligning the modules, securing them in place, and testing for functionality.

    • Identify connection points on both modules

    • Align the modules properly to ensure a secure fit

    • Secure the modules in place using appropriate fasteners or connectors

    • Test the functionality of the attached modules to ensure proper connection

  • Answered by AI
Round 2 - HR 

(2 Questions)

  • Q1. Why do you want to change jobs?
  • Ans. 

    Seeking new challenges and opportunities for growth in a more innovative environment.

    • Desire for new challenges and opportunities

    • Seeking growth and advancement

    • Looking for a more innovative work environment

  • Answered by AI
  • Q2. What can you share about your family?
  • Ans. 

    I come from a close-knit family of four, including my parents and younger sister.

    • My parents have always been supportive of my career choices and encouraged me to pursue my passion for engineering.

    • I have a younger sister who is currently studying computer science at university, following in my footsteps.

    • We enjoy spending quality time together, whether it's going on family vacations or simply having dinner at home.

  • Answered by AI

Assistant Manager Interview Questions & Answers

Goldi Solar user image Kripanath Vishwakarma

posted on 14 Mar 2024

Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - HR 

(3 Questions)

  • Q1. Details of previous employment details
  • Q2. Salary details And educational details
  • Ans. We give personal salary structure and shared my personal educational details
  • Answered by Kripanath Vishwakarma
  • Q3. Experience related
  • Ans. We provided proper working experience in hr at the time of hr round interviews
  • Answered by Kripanath Vishwakarma
Round 2 - Technical 

(2 Questions)

  • Q1. Process related all stap basic details
  • Q2. We given all details of the process of Solar module manufacturing related

Jhabua power Interview FAQs

How many rounds are there in Jhabua power interview?
Jhabua power interview process usually has 2 rounds. The most common rounds in the Jhabua power interview process are Resume Shortlist, Aptitude Test and Technical.
What are the top questions asked in Jhabua power interview?

Some of the top questions asked at the Jhabua power interview -

  1. How to find out inductance value of motor and pi value of transfor...read more
  2. Trouble shooting in hydraulics, pumpmaintenance and valve maintenan...read more
  3. Troubleshooting on pu...read more

Tell us how to improve this page.

Jhabua power Interview Process

based on 4 interviews

Interview experience

3.8
  
Good
View more

Interview Questions from Similar Companies

UTL Solar Interview Questions
3.5
 • 43 Interviews
Senvion Interview Questions
4.0
 • 19 Interviews
M E Energy Interview Questions
4.1
 • 17 Interviews
Gautam Solar Interview Questions
3.9
 • 16 Interviews
LM Wind Power Interview Questions
4.0
 • 13 Interviews
Goldi Solar Interview Questions
4.0
 • 10 Interviews
View all

Jhabua power Reviews and Ratings

based on 58 reviews

3.6/5

Rating in categories

3.4

Skill development

3.4

Work-life balance

3.0

Salary

3.6

Job security

3.4

Company culture

2.7

Promotions

3.4

Work satisfaction

Explore 58 Reviews and Ratings
Deputy Manager
21 salaries
unlock blur

₹7 L/yr - ₹15.5 L/yr

Manager
11 salaries
unlock blur

₹11 L/yr - ₹20 L/yr

Assistant Manager
8 salaries
unlock blur

₹7.9 L/yr - ₹9.9 L/yr

Senior Engineer
8 salaries
unlock blur

₹5.2 L/yr - ₹7.7 L/yr

Senior Manager
7 salaries
unlock blur

₹21 L/yr - ₹30 L/yr

Explore more salaries
Compare Jhabua power with

UTL Solar

3.5
Compare

Danfoss Power Solutions

4.1
Compare

LM Wind Power

4.0
Compare

Senvion

4.0
Compare
Did you find this page helpful?
Yes No
write
Share an Interview