Filter interviews by
Clear (1)
I applied via Company Website
Bukolze relays are used in electrical engineering for their high reliability and ability to handle high voltage and current.
Bukolze relays are known for their robustness and durability.
They are commonly used in power distribution systems and industrial applications.
These relays can handle high voltage and current levels, making them suitable for heavy-duty operations.
They provide reliable switching and protection in el...
Star delta is used in electrical engineering to reduce starting current and protect motors.
Star delta connection is used for induction motors.
It reduces the starting current by a factor of √3.
It helps in reducing voltage drop during motor starting.
It protects the motor from excessive current and overheating.
It is commonly used in applications where the motor needs to start with a low current.
Ten delta test is used to detect winding deformation and shorted turns in transformer.
Detects winding deformation and shorted turns
Helps in identifying internal faults
Used for routine maintenance and troubleshooting
Explosion vent in transformer is used for safety purposes.
It helps to release pressure build-up inside the transformer due to internal faults or external factors.
It prevents the transformer from exploding and causing damage to the surrounding area.
The vent is designed to open at a specific pressure level to ensure safe release of gases.
It is a mandatory safety feature in transformers as per industry standards.
Examples ...
I applied via Walk-in and was interviewed in Nov 2021. There were 2 interview rounds.
Star delta starter is used to reduce the starting current of induction motors.
Reduces the starting current of induction motors
Prevents excessive voltage drop in the power supply
Protects the motor windings from overheating
Allows for smooth and controlled motor starting
Commonly used in applications where high starting torque is not required
The OLTC (On-Load Tap Changer) in a transformer is typically connected to the high voltage side.
OLTC is connected to the high voltage winding of the transformer
It allows for tap changing while the transformer is energized
The low voltage side remains fixed while the high voltage side can be adjusted
Yes, OLTC is always connected in the HT voltage side.
OLTC stands for On-Load Tap Changer.
It is a device used in electrical power transformers to regulate the voltage level.
OLTC is typically connected on the high voltage (HT) side of the transformer.
It allows for tap changing while the transformer is energized and under load.
By changing the tap position, the OLTC can adjust the transformer's output voltage.
This helps to...
UV coil is a component used in HVAC systems to disinfect air by emitting ultraviolet light.
UV coil is installed in the air handling unit of HVAC systems.
It emits ultraviolet light to kill or deactivate microorganisms like bacteria, viruses, and mold spores.
UV light damages the DNA and RNA of these microorganisms, preventing them from reproducing.
UV coil helps improve indoor air quality by reducing the presence of harmf...
UV Coil provides protection against over voltage and under voltage.
UV Coil is a device used in electrical systems to protect against voltage fluctuations.
It monitors the voltage levels and activates when the voltage exceeds or falls below the specified limits.
When the voltage exceeds the upper limit, the UV Coil disconnects the power supply to prevent damage to the equipment.
Similarly, when the voltage falls below the ...
Top trending discussions
I applied via Company Website and was interviewed in Dec 2020. There was 1 interview round.
Checking points in beam and column are critical for ensuring structural integrity.
Checking for cracks or deformations
Ensuring proper alignment and levelness
Verifying adequate reinforcement
Checking for proper bearing and connection details
Using non-destructive testing methods
Following applicable codes and standards
I applied via Walk-in and was interviewed in Nov 2018. There were 6 interview rounds.
Name mangling is a technique used by compilers to give unique names to functions and variables to avoid naming conflicts.
Name mangling is used in C++ to support function overloading.
It is also used in Python to avoid naming conflicts in modules.
Name mangling can make it difficult to access variables and functions from outside the class in which they are defined.
In C++, name mangling can be seen by using the 'nm' comman
My strength programming language is C++. I have extensive experience in developing software and solving complex problems using C++.
Proficient in object-oriented programming with C++
Strong knowledge of data structures and algorithms
Experience in developing efficient and scalable code
Familiarity with C++ libraries and frameworks
Ability to debug and optimize code for performance
Experience in multi-threading and parallel p...
C is a low-level programming language while Java is a high-level object-oriented language.
C is a procedural language while Java is an object-oriented language.
C has manual memory management while Java has automatic garbage collection.
C is platform-dependent while Java is platform-independent.
C supports pointers while Java does not.
C is typically used for system-level programming while Java is used for application devel
Data structure is a way of organizing and storing data in a computer so that it can be accessed and manipulated efficiently.
Data structures define the way data is organized and stored in memory.
They provide efficient algorithms for accessing, inserting, and deleting data.
Examples of data structures include arrays, linked lists, stacks, queues, trees, and graphs.
In 5 years, I see myself as a senior electrical engineer leading a team on innovative projects and contributing to the growth of the company.
Leading a team on innovative projects
Contributing to the growth of the company
Possibly pursuing further education or certifications
Mentoring junior engineers
Attending industry conferences and staying updated on latest technologies
I would prefer a job to gain practical experience and apply my knowledge in a real-world setting.
Prefer job for practical experience
Apply knowledge in real-world setting
Gain industry exposure
Financial independence
Opportunity for career growth
I applied via Naukri.com and was interviewed in Aug 2020. There were 3 interview rounds.
based on 9 reviews
Rating in categories
Assistant Manager
720
salaries
| ₹0 L/yr - ₹0 L/yr |
Deputy Manager
508
salaries
| ₹0 L/yr - ₹0 L/yr |
Senior Engineer
433
salaries
| ₹0 L/yr - ₹0 L/yr |
Quality Engineer
271
salaries
| ₹0 L/yr - ₹0 L/yr |
Manager
229
salaries
| ₹0 L/yr - ₹0 L/yr |
State Bank of India
HDFC Bank
ICICI Bank
Axis Bank