Filter interviews by
I applied via Walk-in and was interviewed before Apr 2020. There was 1 interview round.
Reheater protection is a safety measure to prevent damage to the reheater in a power plant.
Reheater protection is necessary to prevent overheating and damage to the reheater.
It involves monitoring the temperature and pressure of the reheater and shutting down the system if necessary.
Reheater protection can be achieved through the use of sensors, alarms, and automatic shutdown systems.
Examples of reheater protection sys...
Cold start procedure is the process of starting a system or machine from a completely shut down state.
Check power source and ensure it is connected properly
Turn on the machine or system
Check for any error messages or warnings
Allow the machine or system to warm up or stabilize before use
Perform any necessary system checks or tests before use
HP Lp bypass system is a feature in HP printers that allows the printer to continue printing even if one of the ink cartridges is empty.
HP Lp bypass system is designed to prevent printing from stopping due to an empty ink cartridge.
When the printer detects an empty cartridge, it automatically switches to the bypass mode and uses the remaining cartridges to continue printing.
This feature is particularly useful in situat...
The condenser vacuum should be maintained at a level between 28-29 inches of mercury.
The vacuum level is important for efficient operation of the condenser.
The ideal vacuum level is between 28-29 inches of mercury.
If the vacuum level is too low, it can cause reduced efficiency and increased energy consumption.
If the vacuum level is too high, it can cause damage to the condenser.
Regular monitoring and maintenance of the...
Scoop control refers to the process of managing the amount of material being scooped or loaded onto a vehicle or machine.
It involves monitoring the weight and volume of the material being loaded.
Scoop control is important for ensuring safety and preventing overloading.
Examples of machines that use scoop control include excavators, bulldozers, and front-end loaders.
I applied via Campus Placement and was interviewed before Jan 2020. There were 4 interview rounds.
Losses in transformers can be categorized as copper losses and iron losses.
Copper losses occur due to resistance in the windings and are also known as I^2R losses.
Iron losses occur due to hysteresis and eddy currents in the core.
Copper losses can be reduced by using larger conductors with lower resistance.
Iron losses can be minimized by using high-quality magnetic materials and proper core design.
Total losses in a tran...
Efficiency of a transformer is the ratio of output power to input power.
Efficiency is affected by factors such as core losses, winding resistance, and load impedance.
Efficiency can be improved by using high-quality materials and reducing losses.
Efficiency is typically expressed as a percentage and can range from 50% to 99%.
Efficiency is important in reducing energy waste and improving overall system performance.
Eddy current losses in transformers can be reduced by using laminated cores, increasing the core resistance, and minimizing the air gap.
Use laminated cores to reduce eddy current losses
Increase the core resistance by using high resistivity materials
Minimize the air gap between the core and windings
Use magnetic materials with low hysteresis losses
Reduce the frequency of the alternating current
Use thicker laminations to ...
High voltage is preferred for transmission of electrical power due to lower energy losses and reduced cost.
High voltage reduces energy losses during transmission
Reduced current flow at high voltage reduces the cost of transmission lines
High voltage allows for longer transmission distances
Step-up transformers increase voltage for transmission and step-down transformers decrease voltage for distribution
Examples of high v...
Humming noise is generated due to the vibration of magnetic domains in a magnetic material.
Magnetostriction is the property of magnetic materials to change their shape or dimensions when subjected to a magnetic field.
This change in shape causes the magnetic domains to vibrate, which in turn generates a humming noise.
The frequency of the humming noise is directly proportional to the frequency of the magnetic field.
Magne...
Electrical circuits involve the flow of electric current, while magnetic circuits involve the flow of magnetic flux.
Electrical circuits involve the use of conductors, insulators, and power sources to create a path for electric current to flow.
Magnetic circuits involve the use of magnetic materials, such as iron, to create a path for magnetic flux to flow.
Electrical circuits are used in a wide range of applications, inc...
Electrical appliances are devices that run on electricity to perform a specific task.
Examples include refrigerators, washing machines, televisions, air conditioners, and vacuum cleaners.
They are used in homes, offices, and industries for various purposes.
They make our lives easier and more convenient.
They require proper maintenance and care to ensure their longevity and safety.
I applied via Naukri.com and was interviewed before Jun 2021. There were 3 interview rounds.
Aptitude test has been taken
I applied via Company Website and was interviewed in Nov 2022. There were 3 interview rounds.
Different models can refer to various approaches, frameworks, or systems used in operations management.
Different models in operations management include the supply chain model, the lean manufacturing model, and the Six Sigma model.
The supply chain model focuses on optimizing the flow of goods and services from suppliers to customers.
The lean manufacturing model aims to eliminate waste and improve efficiency in producti...
Wind wtg model and difference
A wind wtg model refers to a mathematical representation of a wind turbine generator.
It includes various parameters such as wind speed, rotor diameter, and power output.
The difference between wind wtg models lies in the specific algorithms and equations used to calculate the turbine's performance.
Different models may have varying levels of accuracy and complexity.
Examples of wind wtg models...
The best wtg is the one that has a high efficiency rating, low maintenance requirements, and a proven track record of reliability.
High efficiency rating: Look for a wtg that can generate a significant amount of energy with minimal waste.
Low maintenance requirements: Choose a wtg that is easy to maintain and does not require frequent repairs or replacements.
Proven track record of reliability: Consider wtgs that have bee...
An earthing path is a conductive connection between an electrical system and the earth to prevent electrical shock and protect equipment.
Earthing path is essential for safety in electrical systems.
It provides a low-resistance path for fault currents to flow into the ground.
Earthing path prevents the buildup of static electricity.
It protects equipment from damage caused by lightning strikes or power surges.
Examples of e...
The question is not clear and seems to have a typo.
Please clarify the question as it is not understandable.
Provide more context or correct the typo in the question.
Without proper information, it is not possible to answer the question.
posted on 27 Dec 2024
I applied via Walk-in and was interviewed in Nov 2024. There was 1 interview round.
I have over 10 years of experience in operations management, including leading teams, optimizing processes, and implementing efficiency improvements.
Led a team of 50+ employees in a manufacturing facility, improving production efficiency by 20%
Implemented lean manufacturing principles resulting in a 15% reduction in waste
Developed and implemented SOPs to streamline operations and ensure consistency
Managed inventory lev...
I have extensive expertise in operations management, process improvement, and strategic planning.
Over 10 years of experience in leading and optimizing operations in various industries
Proven track record of implementing process improvements to increase efficiency and reduce costs
Skilled in developing and executing strategic plans to drive business growth
Strong background in project management and team leadership
Certifie
posted on 14 Dec 2024
I applied via Naukri.com and was interviewed before Dec 2023. There were 2 interview rounds.
Experienced Operations Executive with a proven track record of optimizing processes and driving efficiency.
Over 10 years of experience in operations management
Implemented cost-saving initiatives resulting in a 20% reduction in expenses
Led cross-functional teams to streamline workflows and improve productivity
Strong analytical skills and ability to identify areas for improvement
Seeking new challenges and growth opportunities.
Desire for career advancement
Seeking new challenges
Company restructuring
Relocation
Better work-life balance
Yes, I am knowledgeable about distribution licenses and franchises.
I have experience in obtaining and managing distribution licenses for products.
I am familiar with the legal requirements and regulations surrounding distribution licenses.
I have worked with franchises to expand business operations and ensure compliance with franchise agreements.
I applied via LinkedIn and was interviewed before Sep 2022. There were 2 interview rounds.
I applied via Referral and was interviewed in Dec 2023. There was 1 interview round.
The basic rule of safety in any organization is to prioritize the well-being of employees and create a safe working environment.
Ensure compliance with safety regulations and standards
Provide proper training and education on safety procedures
Regularly inspect and maintain equipment and facilities
Encourage reporting of safety concerns and incidents
Implement safety protocols and emergency response plans
Promote a safety cu...
I applied via Approached by Company and was interviewed in Jul 2023. There were 3 interview rounds.
Efficiency of a power plant is a measure of how well it converts fuel into electricity.
Efficiency can be calculated by dividing the actual output by the maximum possible output.
Factors affecting efficiency include the type of fuel used, the age and condition of the plant, and the technology used.
Regular maintenance and upgrades can improve efficiency.
For example, a combined cycle power plant may have a higher efficienc
based on 1 review
Rating in categories
Senior Engineer
78
salaries
| ₹0 L/yr - ₹0 L/yr |
Plant Engineer
60
salaries
| ₹0 L/yr - ₹0 L/yr |
Deputy Chief Engineer
35
salaries
| ₹0 L/yr - ₹0 L/yr |
Engineer
34
salaries
| ₹0 L/yr - ₹0 L/yr |
Electrical Engineer
26
salaries
| ₹0 L/yr - ₹0 L/yr |
NTPC
Tata Power
Adani Power
NHPC