Isgec Hitachi Zosen Senior Design Engineer Interview Questions and Answers

Q1. What means the General tolerances
Ans. 
General tolerances refer to the acceptable range of variation in dimensions or properties of a part or product.
• General tolerances are typically specified in engineering drawings to ensure parts fit and function properly.

• They are usually expressed as a range of acceptable values, such as +/- 0.1mm.

• Tolerances can vary depending on the specific requirements of the part or product.

• Examples of general tolerances include dim...read more
Answered by AI
Add your answer
Q2. What is the material for wheel, Pin
Ans. 
The material for wheel is typically rubber or plastic, while the material for pin is usually metal such as steel or aluminum.
• Wheel material is commonly rubber or plastic for flexibility and durability

• Pin material is usually metal like steel or aluminum for strength and stability
Answered by AI
Add your answer
Q3. What are the grades of Hardwares like Screw, nut washer
Ans. 
Hardware grades are typically classified based on material composition, strength, and corrosion resistance.
• Hardware grades are often denoted by a combination of letters and numbers, such as Grade 8.8 or Grade 316.

• Higher grade numbers generally indicate a higher tensile strength or corrosion resistance.

• Common grades for screws include Grade 2, Grade 5, and Grade 8, with Grade 8 being the strongest.

• For nuts and washers, ...read more
Answered by AI
Add your answer
Q4. How to calculate motor power
Ans. 
Motor power can be calculated using the formula: Power (W) = Torque (Nm) x Speed (RPM) / 9.548
• Calculate the torque required for the application

• Determine the speed at which the motor will operate

• Use the formula Power (W) = Torque (Nm) x Speed (RPM) / 9.548 to calculate motor power
Answered by AI
Add your answer
Q5. How welds are considered
Ans. 
Welds are critical in design engineering for joining metal components together.
• Welds must be strong enough to withstand the intended load and stress.

• Proper welding techniques and materials must be used to ensure the integrity of the weld.

• Inspections and testing should be conducted to verify the quality of the weld.

• Consideration should be given to factors such as joint design, welding process, and material compatibility...read more
Answered by AI
Add your answer

Q1. 1) Hydraulics details
Add your answer
Q2. GD&T explain, the difference between different GD&T
Ans. 
Geometric Dimensioning and Tolerancing (GD&T) is a system for defining and communicating engineering tolerances.
• GD&T is a system used to define and communicate engineering tolerances for manufacturing processes.

• Different GD&T symbols include position, concentricity, profile, perpendicularity, and parallelism.

• Each GD&T symbol has a specific meaning and is used to control different aspects of a part's geometry.

• For exampl...read more
Answered by AI
Add your answer

General Aptitude Questions

Q1. Engineering Basics for Freshers
Add your answer
Q2. Industry Questions for experienced
Add your answer

Q1. Technical Questions on the respective engineering dept
Add your answer

Q1. Salary Discussion & Work policies
Add your answer

Q1. Experience in software
Ans. 
Extensive experience in various software applications and programming languages.
• Proficient in programming languages such as Java, Python, and C++

• Experience with software development tools such as Git, JIRA, and Jenkins

• Familiarity with database management systems such as MySQL and MongoDB

• Experience with web development frameworks such as React and Angular

• Ability to learn and adapt to new software quickly
Answered by AI
Add your answer
Q2. Technical knowledge and skills
Add your answer

Q1. Technical motor ball screws
Add your answer
Q2. Technical basic and sheet metal and Moro’s selection
Add your answer