Add office photos
Filter interviews by
Intervalve Poonawalla Design GET Interview Questions, Process, and Tips
Intervalve Poonawalla Design GET Interview Experiences
1 interview found
ABHIJIT SAWANT
Selected
I applied via LinkedIn and was interviewed in Oct 2024. There was 1 interview round.
(5 Questions)
- Q1. Questions on valves,various Technical question in Mechanical Field, Critical Thinking check, question on Software and GD&T
- Q2. Types of Valves
- Ans.
Valves are devices used to control the flow of fluids or gases in a system.
Types of valves include ball valves, gate valves, globe valves, butterfly valves, and check valves.
Valves can be classified based on their function (e.g. isolation, regulation, safety), design (e.g. rotary, linear), and material (e.g. brass, stainless steel).
Common applications of valves include in plumbing systems, industrial processes, and HVA
- Q3. Components of Valves
- Ans.
Valves are mechanical devices that control the flow of fluids by opening, closing, or partially obstructing passageways.
Valve body: main structure that houses the components
Valve stem: controls the opening and closing of the valve
Valve seat: where the valve closes to stop the flow
Valve disc: moves to open or close the valve
Valve actuator: mechanism that operates the valve (manual, electric, pneumatic, etc.)
- Q4. Draw Share forced diagram,BMD of Beam(cantilever beam)
- Ans.
A Share forced diagram and BMD of a cantilever beam are drawn to analyze the internal forces and moments.
Start by drawing the shear force diagram to show the variation of shear force along the length of the beam.
Then, draw the bending moment diagram to illustrate the variation of bending moment along the beam.
Identify key points such as points of zero shear force or maximum bending moment.
Use equations of equilibrium t...
- Q5. What is cavitation,Thermal conductivity,types of flow,how to identify whether flow is laminar or turbulent, questions on design software
- Ans.
Cavitation is the formation of vapor bubbles in a liquid flow due to low pressure, Thermal conductivity is the ability of a material to conduct heat, Types of flow include laminar and turbulent, Design software questions may involve CAD programs.
Cavitation is the formation of vapor bubbles in a liquid flow, which can cause damage to equipment like pumps and propellers.
Thermal conductivity is the ability of a material t...
Interview Preparation Tips
SOM,TOM, Fluid Dyanmics,Heat And Mass Transfer,basic Manufacturing process
So be prepared and read basic concepts before going to any interview
Best luck 👍
Top trending discussions
Interview questions from similar companies
(5 Questions)
- Q1. What means the General tolerances
- Ans.
General tolerances refer to the acceptable range of variation in dimensions or properties of a part or product.
General tolerances are typically specified in engineering drawings to ensure parts fit and function properly.
They are usually expressed as a range of acceptable values, such as +/- 0.1mm.
Tolerances can vary depending on the specific requirements of the part or product.
Examples of general tolerances include dim...
- Q2. What is the material for wheel, Pin
- Ans.
The material for wheel is typically rubber or plastic, while the material for pin is usually metal such as steel or aluminum.
Wheel material is commonly rubber or plastic for flexibility and durability
Pin material is usually metal like steel or aluminum for strength and stability
- Q3. What are the grades of Hardwares like Screw, nut washer
- Ans.
Hardware grades are typically classified based on material composition, strength, and corrosion resistance.
Hardware grades are often denoted by a combination of letters and numbers, such as Grade 8.8 or Grade 316.
Higher grade numbers generally indicate a higher tensile strength or corrosion resistance.
Common grades for screws include Grade 2, Grade 5, and Grade 8, with Grade 8 being the strongest.
For nuts and washers, ...
- Q4. How to calculate motor power
- Ans.
Motor power can be calculated using the formula: Power (W) = Torque (Nm) x Speed (RPM) / 9.548
Calculate the torque required for the application
Determine the speed at which the motor will operate
Use the formula Power (W) = Torque (Nm) x Speed (RPM) / 9.548 to calculate motor power
- Q5. How welds are considered
- Ans.
Welds are critical in design engineering for joining metal components together.
Welds must be strong enough to withstand the intended load and stress.
Proper welding techniques and materials must be used to ensure the integrity of the weld.
Inspections and testing should be conducted to verify the quality of the weld.
Consideration should be given to factors such as joint design, welding process, and material compatibility...
Skills evaluated in this interview
Good and best wishes for your future la
(3 Questions)
- Q1. Hug me in the evening and I will
- Q2. Hub of the world cup final year of
- Ans.
The hub of the World Cup final changes every year.
The World Cup final is held in a different country each year.
The host country is selected through a bidding process.
The hub of the World Cup final is the stadium where the match takes place.
The hub can be in any country that has been chosen to host the final.
- Q3. Hj u r right now because this is the last
I applied via Approached by Company and was interviewed in May 2023. There were 2 interview rounds.
(2 Questions)
- Q1. 1) Hydraulics details
- Q2. GD&T explain, the difference between different GD&T
- Ans.
Geometric Dimensioning and Tolerancing (GD&T) is a system for defining and communicating engineering tolerances.
GD&T is a system used to define and communicate engineering tolerances for manufacturing processes.
Different GD&T symbols include position, concentricity, profile, perpendicularity, and parallelism.
Each GD&T symbol has a specific meaning and is used to control different aspects of a part's geometry.
For exampl...
Interview Preparation Tips
- Hydraulics
- gd&t
Skills evaluated in this interview
Sachin Gore
I applied via Naukri.com and was interviewed before Nov 2020. There were 3 interview rounds.
Interview Questionnaire
5 Questions
- Q1. Why I hired you,,, benefits my company for hiring you
- Q2. Your family background
- Q3. GD and T, tollerance
- Q4. Manufacturing process
- Q5. Any Case study, any situation
Interview Preparation Tips
Graduate Engineer Trainee (Get) Interview Questions & Answers
A-1 Fence Products
Anonymous
posted on 30 Jul 2022
I applied via Campus Placement and was interviewed in Jan 2022. There were 3 interview rounds.
Not so hard if you practice daily you may crack very easily
(2 Questions)
- Q1. Most of the questions are asked from basic knowledge.
- Q2. Inverter, Generator, power system related
(1 Question)
- Q1. Be honest with yourself while answering the HR round
Interview Preparation Tips
Design Engineer Interview Questions & Answers
Tecosim Engineering Services
Anonymous
posted on 16 Feb 2022
I applied via Company Website and was interviewed in Jan 2022. There were 3 interview rounds.
(1 Question)
- Q1. Technical tool test on Nx or Catia
(2 Questions)
- Q1. Tell about personal and some design related technical question
- Q2. Type of clamp and locator Type of checking fixture
- Ans.
The type of clamp and locator used in a checking fixture depends on the specific application and requirements.
The clamp and locator should be chosen based on the part being checked and the desired level of accuracy.
Common types of clamps include toggle clamps, pneumatic clamps, and hydraulic clamps.
Locators can be pins, blocks, or other features that ensure proper positioning of the part.
The checking fixture may also i...
(1 Question)
- Q1. Personal interrogation
Interview Preparation Tips
I applied via Naukri.com and was interviewed in Sep 2021. There was 1 interview round.
Interview Questionnaire
1 Question
- Q1. Material of rotavator blades
- Ans.
Rotavator blades are commonly made of hardened steel or boron steel.
Hardened steel is a popular choice for rotavator blades due to its durability and resistance to wear and tear.
Boron steel is another option that offers high strength and toughness.
Other materials such as carbon steel and alloy steel may also be used depending on the specific application.
The choice of material will depend on factors such as the type of ...
Interview Preparation Tips
Rohit Shinde
(2 Questions)
- Q1. Tell me about yourself.
- Q2. No
Interview Preparation Tips
Graduate Engineer Trainee (Get) Interview Questions & Answers
Kirloskar Toyota Textile Machinery
Anonymous
posted on 29 Jun 2021
I applied via Walk-in and was interviewed in May 2021. There were 3 interview rounds.
Interview Questionnaire
1 Question
- Q1. They asked questions about my final year internship and project and questions regarding machine shop and quality fundamentals.
Interview Preparation Tips
Intervalve Poonawalla Interview FAQs
Tell us how to improve this page.
Interview Questions for Popular Designations
- Graduate Engineer Trainee (Get) Interview Questions
- Design Engineer Interview Questions
- Electrical GET Interview Questions
- Graphic Designer Interview Questions
- Mechanical Engg. Design Interview Questions
- Senior Design Engineer Interview Questions
- Interior Designer Interview Questions
- Web Designer Interview Questions
- Show more
People are getting interviews through
Interview Questions from Similar Companies
|
Design Engineer
25
salaries
|  ₹1.8 L/yr - ₹5.3 L/yr |
|
Purchase Engineer
16
salaries
| ₹3 L/yr - ₹4 L/yr |
|
Assistant Manager
14
salaries
| ₹7.2 L/yr - ₹9.4 L/yr |
|
QA Engineer
8
salaries
| ₹3 L/yr - ₹4.5 L/yr |
|
Planning Engineer
7
salaries
| ₹2 L/yr - ₹4.5 L/yr |
Bharat Biotech International
Serum Institute of India
Panacea Biotec
Biocon Limited
Calculate your in-hand salary
- Home >
- Interviews >
- Intervalve Poonawalla Interview Questions >
- Intervalve Poonawalla Design GET Interview Questions
