Upload Button Icon Add office photos

Honda Motorcycle & Scooter

Compare button icon Compare button icon Compare

Proud winner of ABECA 2024 - AmbitionBox Employee Choice Awards

zig zag pattern zig zag pattern

Filter interviews by

Honda Motorcycle & Scooter Safety Engineer Interview Questions and Answers

Updated 27 May 2024

Honda Motorcycle & Scooter Safety Engineer Interview Experiences

1 interview found

Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Referral and was interviewed in Apr 2024. There was 1 interview round.

Round 1 - Technical 

(3 Questions)

  • Q1. What is the fire
  • Ans. 

    Fire is a rapid chemical reaction that releases heat, light, and various gases.

    • Fire is a rapid oxidation process that releases energy in the form of heat and light.

    • It requires three elements to occur: fuel, oxygen, and heat.

    • Fires can be classified based on the type of fuel involved, such as Class A (wood, paper), Class B (flammable liquids), etc.

    • Fire safety measures include fire extinguishers, smoke detectors, and evac

  • Answered by AI
  • Q2. What is the safety
  • Ans. 

    Safety is the state of being protected from harm, danger, or injury.

    • Safety involves identifying and mitigating risks to prevent accidents or injuries.

    • It includes following safety protocols and procedures to ensure a safe work environment.

    • Safety also involves providing proper training and equipment to employees to prevent accidents.

    • Regular safety inspections and audits are conducted to identify potential hazards and add...

  • Answered by AI
  • Q3. How to maintain fire pump pressure
  • Ans. 

    Maintain fire pump pressure by regular testing, inspection, and maintenance.

    • Regularly test the fire pump to ensure it is functioning properly

    • Inspect the pump for any leaks, damage, or blockages

    • Perform routine maintenance such as lubrication and cleaning

    • Check the pressure gauges regularly to ensure they are within the correct range

    • Train personnel on how to properly operate the fire pump in case of emergency

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - You r confident by any questions to answer

Interview questions from similar companies

I applied via Recruitment Consultant and was interviewed before Aug 2020. There were 5 interview rounds.

Interview Questionnaire 

1 Question

  • Q1. Experience related questions asked in interview

Interview Preparation Tips

Interview preparation tips for other job seekers - Keep calm and be polite

I applied via Recruitment Consulltant and was interviewed before Feb 2021. There was 1 interview round.

Round 1 - Technical 

(2 Questions)

  • Q1. Open pump house and Tunnels
  • Q2. Road and

Interview Preparation Tips

Interview preparation tips for other job seekers - Navayaga engineering company Ltd

I applied via Recruitment Consulltant and was interviewed before Feb 2021. There was 1 interview round.

Round 1 - Technical 

(2 Questions)

  • Q1. Open pump house and Tunnels
  • Q2. Road and

Interview Preparation Tips

Interview preparation tips for other job seekers - Navayaga engineering company Ltd

I applied via Campus Placement and was interviewed before Jul 2020. There was 1 interview round.

Interview Questionnaire 

1 Question

  • Q1. Basics about the education and knowledge

Interview Preparation Tips

Interview preparation tips for other job seekers - They hire in rnd very easily ...not a big task..
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
4-6 weeks
Result
Selected Selected

I applied via Naukri.com and was interviewed in Nov 2022. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(2 Questions)

  • Q1. Frf measurements
  • Q2. Structural vibrations
Round 3 - HR 

(2 Questions)

  • Q1. Resonance and modal shapes
  • Q2. Real time application
  • Ans. 

    Real time application refers to software that processes data as it is received, providing immediate results.

    • Real time applications require fast processing and low latency

    • Examples include stock trading platforms, traffic monitoring systems, and online gaming

    • Real time applications often rely on event-driven architecture and streaming data processing

    • Real time applications can be challenging to develop and require careful

  • Answered by AI
Interview experience
5
Excellent
Difficulty level
-
Process Duration
Less than 2 weeks
Result
-

I appeared for an interview in Feb 2025, where I was asked the following questions.

  • Q1. Type of gear
  • Ans. 

    Gears are mechanical components that transmit torque and motion between rotating shafts, essential in various machines.

    • Types of gears include spur gears, bevel gears, and worm gears.

    • Spur gears are used in clocks and conveyor systems for simple motion transfer.

    • Bevel gears are used in applications like hand drills to change the axis of rotation.

    • Worm gears provide high torque and are commonly found in elevators and tuning

  • Answered by AI
  • Q2. What is cp nd cpk
  • Ans. 

    Cp and Cpk are statistical measures used to assess process capability in manufacturing and quality control.

    • Cp (Process Capability) measures the potential capability of a process to produce output within specified limits.

    • Cpk (Process Capability Index) measures how close a process is running to its specification limits, considering the mean.

    • Cp is calculated as (USL - LSL) / (6 * sigma), where USL is the upper specificati...

  • Answered by AI
  • Q3. What is pp nd ppk
  • Ans. 

    PP and PPK are statistical measures used in process capability analysis to assess process performance and capability.

    • PP (Process Performance) measures how well a process performs over time, considering variation.

    • PPK (Process Performance Index) assesses how well a process meets specifications, accounting for process mean and variation.

    • Example: A PP of 1.5 indicates a capable process, while a PPK of 1.0 suggests it may n...

  • Answered by AI
  • Q4. Type of forging
  • Ans. 

    Forging is a manufacturing process that shapes metal using compressive forces, enhancing its strength and durability.

    • Types of forging include open-die forging, where metal is shaped between two flat dies.

    • Closed-die forging involves shaping metal in a die that completely encloses it, allowing for more complex shapes.

    • Roll forging is a continuous process that reduces the cross-section of a workpiece by passing it through ...

  • Answered by AI
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I appeared for an interview before Jan 2024.

Round 1 - One-on-one 

(2 Questions)

  • Q1. Do u know about HT process
  • Ans. 

    HT process refers to heat treatment process used to alter the physical and mechanical properties of materials.

    • HT process involves heating and cooling materials to achieve desired properties.

    • Common techniques include annealing, quenching, tempering, and normalizing.

    • Example: Heat treating steel to increase hardness and strength.

  • Answered by AI
  • Q2. How many u have experience
  • Ans. 

    I have 8 years of experience in the field of engineering.

    • 8 years of experience in engineering

    • Specialized in mechanical and electrical engineering

    • Worked on various projects including designing, testing, and implementation

    • Experience with CAD software such as AutoCAD and SolidWorks

  • Answered by AI
Interview experience
5
Excellent
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Company Website and was interviewed in Nov 2024. There were 4 interview rounds.

Round 1 - HR 

(2 Questions)

  • Q1. I am ready for interview
  • Ans. 

    Ok i am ready for interview

  • Answered Anonymously
  • Q2. I am confidential
  • Ans. 

    Do you best my life is all efforts

  • Answered Anonymously
Round 2 - HR 

(2 Questions)

  • Q1. I am filling very well
  • Ans. 

    My side can do best in company policy

  • Answered Anonymously
  • Q2. I am doing my best
Round 3 - HR 

(2 Questions)

  • Q1. I am doing hard working
  • Q2. I am taking it good decision during working
Round 4 - HR 

(2 Questions)

  • Q1. I am going to safety task
  • Q2. I am doing work accordingly to company policy

Interview Preparation Tips

Interview preparation tips for other job seekers - All events and activities do very well
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Company Website and was interviewed before Jan 2023. There was 1 interview round.

Round 1 - Technical 

(1 Question)

  • Q1. Software & design question

Honda Motorcycle & Scooter Interview FAQs

How many rounds are there in Honda Motorcycle & Scooter Safety Engineer interview?
Honda Motorcycle & Scooter interview process usually has 1 rounds. The most common rounds in the Honda Motorcycle & Scooter interview process are Technical.
What are the top questions asked in Honda Motorcycle & Scooter Safety Engineer interview?

Some of the top questions asked at the Honda Motorcycle & Scooter Safety Engineer interview -

  1. How to maintain fire pump press...read more
  2. What is the f...read more
  3. What is the saf...read more

Tell us how to improve this page.

Honda Motorcycle & Scooter Safety Engineer Interview Process

based on 2 interviews

Interview experience

5
  
Excellent
View more

Interview Questions from Similar Companies

Tata Motors Interview Questions
4.2
 • 1k Interviews
Maruti Suzuki Interview Questions
4.2
 • 599 Interviews
Hero MotoCorp Interview Questions
4.1
 • 343 Interviews
TVS Motor Interview Questions
4.0
 • 320 Interviews
Bajaj Auto Interview Questions
3.9
 • 273 Interviews
Ashok Leyland Interview Questions
4.1
 • 248 Interviews
Royal Enfield Interview Questions
4.2
 • 157 Interviews
View all

Honda Motorcycle & Scooter Safety Engineer Reviews and Ratings

based on 1 review

5.0/5

Rating in categories

5.0

Skill development

5.0

Work-life balance

5.0

Salary

1.0

Job security

5.0

Company culture

1.0

Promotions

5.0

Work satisfaction

Explore 1 Review and Rating
Manager
832 salaries
unlock blur

₹13.5 L/yr - ₹28.3 L/yr

Senior Executive
810 salaries
unlock blur

₹9 L/yr - ₹17.2 L/yr

Assistant Manager
757 salaries
unlock blur

₹11.9 L/yr - ₹22 L/yr

Executive
631 salaries
unlock blur

₹5 L/yr - ₹15 L/yr

Area Sales Manager
192 salaries
unlock blur

₹8 L/yr - ₹22 L/yr

Explore more salaries
Compare Honda Motorcycle & Scooter with

Tata Motors

4.2
Compare

Maruti Suzuki

4.2
Compare

Ashok Leyland

4.1
Compare

Hero MotoCorp

4.1
Compare
Did you find this page helpful?
Yes No
write
Share an Interview