Upload Button Icon Add office photos

Honda

Compare button icon Compare button icon Compare

Filter interviews by

Clear (1)

Honda Mechanic Interview Questions and Answers

Updated 13 Feb 2023

Honda Mechanic Interview Experiences

1 interview found

Mechanic Interview Questions & Answers

user image Anonymous

posted on 13 Feb 2023

Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(2 Questions)

  • Q1. What is clutch and its function
  • Ans. 

    Clutch is a mechanical device that engages and disengages power transmission between the engine and transmission.

    • Clutch is located between the engine and transmission

    • It allows the driver to change gears and control the power flow

    • When the clutch pedal is pressed, the clutch disengages and power flow is cut off

    • When the clutch pedal is released, the clutch engages and power flow is restored

    • Clutch can wear out over time an

  • Answered by AI
  • Q2. What the role of brake
  • Ans. 

    The role of brakes is to slow down or stop a vehicle by converting kinetic energy into heat energy.

    • Brakes are essential for safe driving and prevent accidents.

    • They work by applying friction to the wheels, which slows down the vehicle.

    • There are different types of brakes, including disc brakes and drum brakes.

    • Regular maintenance and inspection of brakes is important to ensure they are functioning properly.

    • In emergency si...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Be prepared be confident, answer smartly without hesitate

Interview questions from similar companies

I applied via Naukri.com and was interviewed before Apr 2020. There was 1 interview round.

Interview Questionnaire 

3 Questions

  • Q1. Haw was work
  • Q2. Mechanic work is hard work?
  • Ans. 

    Yes, mechanic work can be physically demanding and requires strength and endurance.

    • Mechanics often have to lift heavy parts and equipment

    • They may have to work in uncomfortable positions or tight spaces

    • Repetitive motions can lead to strain and fatigue

    • Working with tools and machinery can be dangerous if not done properly

  • Answered by AI
  • Q3. Mechanic work dispersion work?

Interview Preparation Tips

Interview preparation tips for other job seekers - Only work progress
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Approached by Company and was interviewed before Dec 2021. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all Resume tips
Round 2 - Group Discussion 

First off all, we ought to have some sortoff automobile and production knowledge because they will definitely check our technical skill secondly, listening skill and fluency plays significant factor

Round 3 - HR 

(2 Questions)

  • Q1. It was more like technical round moreover you have to be clear in purpose of your life based upon they are recruiting
  • Q2. Define tqbm ? What is bom?
  • Ans. 

    TQBM stands for 'Tudo Que Bem' which means 'Everything is fine' in Portuguese. BOM means 'good' in Portuguese.

    • TQBM is a common phrase used in Brazil to ask if everything is okay.

    • BOM is often used as a response to TQBM to indicate that everything is good.

    • Both TQBM and BOM are informal and commonly used in everyday conversations.

    • Example: A friend asks 'TQBM?' and you respond 'BOM, e voce?' which means 'Everything is fine

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Believe in yourself and consistency plays major part always give your 100%

I applied via Referral and was interviewed before Sep 2021. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all Resume tips
Round 2 - HR 

(2 Questions)

  • Q1. Questions related to your life and society to check your presence of mind and awareness of the world.
  • Q2. Question from ic engines,about their working and processes involved.

Interview Preparation Tips

Topics to prepare for Tata Motors Associate interview:
  • Automobile,ic engines,excel.
Interview preparation tips for other job seekers - Be yourself,prepare well and hope for the best...
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
-
Result
Not Selected

I was interviewed in Sep 2023.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all Resume tips
Round 2 - Technical 

(2 Questions)

  • Q1. Force motors me work karne ke liye kya documents chahiye
  • Q2. I T I doucments
Round 3 - Technical 

(1 Question)

  • Q1. Force motors me work karne ke liye kya documents chahiye
Round 4 - Technical 

(1 Question)

  • Q1. Force motors me work karne ke liye kya documents chahiye

Interview Preparation Tips

Interview preparation tips for other job seekers - Mechanic I TI fitter

Associate Interview Questions & Answers

Bajaj Auto user image pradnya gadahire

posted on 31 Jul 2024

Interview experience
5
Excellent
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Referral and was interviewed in Jan 2024. There were 2 interview rounds.

Round 1 - Aptitude Test 

Logical aptitude test

Round 2 - Technical 

(2 Questions)

  • Q1. Practical test of vlookup and pivot
  • Q2. What is sap and explain tcodee
  • Ans. 

    SAP is a software used by companies for managing business operations and customer relations. Tcode is a transaction code used to access specific functions in SAP.

    • SAP stands for Systems, Applications, and Products in Data Processing.

    • It is a software used by companies for various business operations like finance, HR, sales, etc.

    • Tcode is a transaction code used to access specific functions in SAP, like creating a purchase

  • Answered by AI

Interview Preparation Tips

Topics to prepare for Bajaj Auto Associate interview:
  • SAP
Interview preparation tips for other job seekers - Join on contract basis

Skills evaluated in this interview

Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Naukri.com and was interviewed in Sep 2023. There was 1 interview round.

Round 1 - One-on-one 

(5 Questions)

  • Q1. How much sensor in bike
  • Ans. 

    The number of sensors in a bike varies depending on the make and model, but typically includes sensors for speed, temperature, and fuel levels.

    • Number of sensors in a bike can range from 5 to 30 depending on the complexity of the bike.

    • Common sensors in a bike include speed sensors, temperature sensors, fuel level sensors, and tire pressure sensors.

    • Some high-end bikes may also have sensors for lean angle, suspension trav...

  • Answered by AI
  • Q2. What is tps sensor
  • Ans. 

    TPS sensor stands for Throttle Position Sensor, which monitors the position of the throttle valve.

    • TPS sensor is a crucial component in the engine management system.

    • It helps in determining the amount of air entering the engine.

    • The sensor sends this information to the engine control unit (ECU) to adjust fuel injection and ignition timing.

    • A faulty TPS sensor can cause issues like poor acceleration, stalling, or rough idli...

  • Answered by AI
  • Q3. What is ht coil
  • Ans. 

    The HT coil, also known as the high tension coil, is an essential component in the ignition system of a vehicle, responsible for generating high voltage to create a spark in the spark plugs.

    • HT coil is a type of ignition coil used in vehicles to produce high voltage for the spark plugs

    • It is typically located near the engine and connected to the distributor or ignition module

    • A faulty HT coil can result in misfiring, roug

  • Answered by AI
  • Q4. What is h2 sensor
  • Ans. 

    An h2 sensor is a hydrogen sensor used to detect the presence of hydrogen gas in a given environment.

    • H2 sensors are commonly used in industrial settings to monitor for leaks in hydrogen gas pipelines.

    • They are also used in fuel cell vehicles to ensure safe operation.

    • The sensor typically works by detecting changes in electrical conductivity when exposed to hydrogen gas.

  • Answered by AI
  • Q5. What is working of cdi and Rr unit
  • Ans. 

    CDI (Capacitor Discharge Ignition) and RR (Rectifier Regulator) units work together to regulate the electrical system in a motorcycle.

    • CDI unit stores energy from the stator and releases it to the ignition coil to create a spark for combustion.

    • RR unit regulates the voltage produced by the stator to prevent overcharging of the battery.

    • CDI and RR units work in tandem to ensure proper ignition timing and electrical system ...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - This is very good interview

I applied via Recruitment Consultant and was interviewed in Jul 2021. There was 1 interview round.

Interview Questionnaire 

3 Questions

  • Q1. How will you convince customer for Product?
  • Ans. 

    To convince a customer for a product, I would highlight its unique features, demonstrate its benefits, provide testimonials, and offer a trial or discount.

    • Highlight the unique features of the product

    • Demonstrate the benefits it offers

    • Provide testimonials from satisfied customers

    • Offer a trial or discount to encourage the customer to try the product

  • Answered by AI
  • Q2. How will you handle critical situations?
  • Q3. What were your Job roles in Previous Companies?

Interview Preparation Tips

Interview preparation tips for other job seekers - Knowledges of Previous Job profiles are mandatory. You should have knowledge about your previous job roles. Experience matters.
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
-
Result
Selected Selected

I applied via Recruitment Consulltant and was interviewed in Feb 2022. There was 1 interview round.

Round 1 - Technical 

(4 Questions)

  • Q1. Related to Environment Compliance
  • Q2. Waste Management
  • Q3. Water Positive organisation
  • Q4. Net zero . Plastic netrality

Interview Preparation Tips

Interview preparation tips for other job seekers - Deep Knowledge current Environment issue. EPR.

I applied via Naukri.com and was interviewed in Oct 2022. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all Resume tips
Round 2 - Aptitude Test 

Maths(percentage, profit and loss)

Round 3 - Coding Test 

Reasoning (average coding deciding blood relation)

Interview Preparation Tips

Topics to prepare for Hero MotoCorp Mechanic interview:
  • Mechanical
  • Tools
  • Cutting
Interview preparation tips for other job seekers - This area good for me .my dream is I have joined in hero.
Contribute & help others!
anonymous
You can choose to be anonymous

Honda Interview FAQs

How many rounds are there in Honda Mechanic interview?
Honda interview process usually has 2 rounds. The most common rounds in the Honda interview process are Resume Shortlist and Technical.
What are the top questions asked in Honda Mechanic interview?

Some of the top questions asked at the Honda Mechanic interview -

  1. What is clutch and its funct...read more
  2. What the role of br...read more

Recently Viewed

SALARIES

Honda

SALARIES

Bajaj Motors

REVIEWS

Bajaj Motors

No Reviews

REVIEWS

Honda

No Reviews

INTERVIEWS

Honda

No Interviews

REVIEWS

Bajaj Motors

No Reviews

SALARIES

Subros

INTERVIEWS

Honda

No Interviews

SALARIES

Honda

DESIGNATION

Tell us how to improve this page.

Honda Mechanic Interview Process

based on 1 interview

Interview experience

4
  
Good
View more

Mechanic Interview Questions from Similar Companies

BMW Mechanic Interview Questions
4.2
 • 1 Interview
View all
Honda Mechanic Salary
based on 6 salaries
₹0.7 L/yr - ₹1.6 L/yr
37% less than the average Mechanic Salary in India
View more details

Honda Mechanic Reviews and Ratings

based on 4 reviews

5.0/5

Rating in categories

5.0

Skill development

5.0

Work-life balance

3.5

Salary

4.3

Job security

3.9

Company culture

3.9

Promotions

4.4

Work satisfaction

Explore 4 Reviews and Ratings
Assistant Manager
211 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Executive
199 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Senior Executive
183 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Deputy Manager
126 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Manager
89 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Explore more salaries
Compare Honda with

Maruti Suzuki

4.2
Compare

Tata Motors

4.2
Compare

Mahindra & Mahindra

4.1
Compare

Bajaj Auto

3.9
Compare
Did you find this page helpful?
Yes No
write
Share an Interview
Rate your experience using AmbitionBox
Terrible
Terrible
Poor
Poor
Average
Average
Good
Good
Excellent
Excellent