Filter interviews by
I applied via Campus Placement and was interviewed in Jan 2021. There was 1 interview round.
Top trending discussions
posted on 15 Apr 2022
I was interviewed in Oct 2021.
posted on 3 Apr 2024
I applied via Recruitment Consulltant and was interviewed in Mar 2024. There was 1 interview round.
To start an induction motor, apply a voltage to the stator windings to create a rotating magnetic field.
Apply a voltage to the stator windings to create a rotating magnetic field
The rotating magnetic field induces currents in the rotor windings, causing it to start rotating
Use a starter or a soft starter to control the starting current and reduce stress on the motor
Ensure proper maintenance of the motor to prolong its
posted on 29 Aug 2023
posted on 5 Sep 2023
I applied via Walk-in and was interviewed in Aug 2023. There were 2 interview rounds.
An ideal transformer is a theoretical transformer with no losses and perfect efficiency.
An ideal transformer has no resistance, leakage inductance, or core losses.
It has a turns ratio that perfectly converts voltage and current from primary to secondary windings.
Efficiency is 100% in an ideal transformer.
Real transformers have losses due to resistance, eddy currents, and hysteresis.
kVA is the apparent power, while kW is the real power. The relationship between them is determined by the power factor.
kVA is the product of voltage and current in a circuit, while kW is the actual power consumed by the load.
The relationship between kVA and kW is determined by the power factor of the load.
Power factor = kW / kVA. A power factor of 1 indicates all power is being used efficiently.
For example, if a load h...
posted on 5 Oct 2023
Salary dis cussion and
posted on 22 Jan 2023
I applied via Campus Placement and was interviewed in Dec 2022. There were 2 interview rounds.
The manager is responsible for overseeing and coordinating the maintenance department to ensure efficient operations and optimal performance.
The manager is responsible for setting goals and objectives for the maintenance department.
They develop and implement maintenance policies and procedures.
The manager oversees the scheduling and coordination of maintenance activities.
They are in charge of managing the maintenance b...
I am 35 years old.
I am currently 35 years old.
I was born in 1986.
I have 35 years of life experience.
posted on 23 Feb 2023
I applied via Approached by Company and was interviewed in Aug 2022. There were 2 interview rounds.
Electrical safety is crucial for maintenance work to prevent accidents and injuries.
Proper training and education on electrical safety measures
Use of personal protective equipment (PPE) such as gloves, goggles, and insulated tools
Regular inspection and maintenance of electrical equipment
Adherence to safety regulations and guidelines
Proper labeling and identification of electrical hazards
Emergency response plan in case ...
Electrical maintenance servicing for power factor 0.999
Power factor correction capacitor maintenance
Regular inspection of electrical equipment
Testing and calibration of power factor meters
Monitoring and analysis of power factor data
Implementation of energy-efficient measures
I applied via Naukri.com and was interviewed in Apr 2022. There were 2 interview rounds.
posted on 24 Oct 2021
I applied via Company Website and was interviewed in Sep 2021. There was 1 interview round.
Drive is a device that controls the speed, torque, direction, and acceleration of an electrical motor.
A drive is an electronic device that regulates the power supplied to an electric motor.
It controls the speed, torque, direction, and acceleration of the motor.
Drives are used in various applications such as pumps, fans, conveyors, and compressors.
Examples of drives include AC drives, DC drives, servo drives, and steppe
PLC is a programmable logic controller used for automation of industrial processes, while SCADA is a supervisory control and data acquisition system used for monitoring and controlling large-scale processes.
PLC is used for controlling specific processes, while SCADA is used for monitoring and controlling multiple processes
PLC is hardware-based, while SCADA is software-based
PLC is used for real-time control, while SCADA...
VFD stands for Variable Frequency Drive. It is an electronic device that controls the speed of an AC motor by varying the frequency of the electrical supply to the motor.
VFD controls the speed of an AC motor by varying the frequency of the electrical supply to the motor
It converts the incoming AC power to DC and then back to AC at the desired frequency
VFDs are used in various applications such as HVAC systems, pumps, c...
Robots work based on a set of programmed instructions and use sensors and actuators to interact with their environment.
Robots follow a set of instructions called a program.
They use sensors to gather information about their surroundings.
Actuators allow robots to physically interact with their environment.
Robots can be programmed to perform various tasks, such as assembly, welding, or inspection.
Examples of robots includ...
DG set stands for Diesel Generator set. It is a combination of a diesel engine and an electric generator used to generate electrical power.
DG set is commonly used as a backup power source in case of power outages or in remote areas where there is no access to the main power grid.
It consists of a diesel engine that drives an alternator to produce electricity.
DG sets are available in various sizes and power capacities to...
CNC machine stands for Computer Numerical Control machine. It is a computer-controlled machine used for precision manufacturing.
CNC machines are used in various industries such as aerospace, automotive, and electronics.
They use CAD (Computer-Aided Design) software to create a design that is then translated into a set of instructions for the machine.
The machine then uses these instructions to cut and shape the material ...
VMC machine stands for Vertical Machining Center, used for precision cutting and drilling of metal and plastic materials.
VMC machine is a type of CNC machine used for milling, drilling, and cutting operations
It has a vertical spindle that moves along the Z-axis to perform operations
It is used for precision cutting and drilling of metal and plastic materials
Examples of VMC machines include Haas VF-2, Mazak VCN-510C, and
Assistant Manager
211
salaries
| ₹8.8 L/yr - ₹20.5 L/yr |
Executive
199
salaries
| ₹1.8 L/yr - ₹10.4 L/yr |
Senior Executive
183
salaries
| ₹5.8 L/yr - ₹14.5 L/yr |
Deputy Manager
128
salaries
| ₹12.9 L/yr - ₹26.8 L/yr |
Manager
92
salaries
| ₹15 L/yr - ₹39.2 L/yr |
Maruti Suzuki
Tata Motors
Mahindra & Mahindra
Bajaj Auto