Upload Button Icon Add office photos

HARMAN

Compare button icon Compare button icon Compare

Filter interviews by

Clear (1)

HARMAN Senior Consultant Interview Questions and Answers

Updated 12 Nov 2024

HARMAN Senior Consultant Interview Experiences

2 interviews found

Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
2-4 weeks
Result
Selected Selected
Round 1 - Technical 

(2 Questions)

  • Q1. Episode creation
  • Q2. Describe LOT rules
  • Ans. 

    LOT rules are a set of regulations governing the use of the London Overground Train services.

    • LOT rules include guidelines for ticketing, passenger behavior, and safety regulations.

    • Passengers must have a valid ticket to travel on the London Overground Train services.

    • LOT rules also cover restrictions on luggage size and alcohol consumption on trains.

    • Failure to comply with LOT rules may result in fines or penalties.

  • Answered by AI
Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all Resume tips
Round 2 - Aptitude Test 

Grammar, sentence mastery, and jumbled sentences

Round 3 - Group Discussion 

They will give one topic in a group we will have to share our thoughts (to check our fluency and topic knowledge)

Interview Preparation Tips

Interview preparation tips for other job seekers - Be confident and make sure you are good in communication

Senior Consultant Interview Questions Asked at Other Companies

asked in Capgemini
Q1. 1. What's the use of update sets and how do you move update set f ... read more
Q2. 1. What is Virtual DOM? How does it work & Its algorithm? 2. ... read more
asked in Capgemini
Q3. 1. If MAM is there then why do we need MDM? 2. What are the diffe ... read more
asked in Birlasoft
Q4. What is the difference between the cursors declared in procedures ... read more
asked in Capgemini
Q5. JCL 1. Ways in which the you can paas on data from.jcl to cobol.: ... read more

Senior Consultant Jobs at HARMAN

View all

Interview questions from similar companies

Interview Questionnaire 

2 Questions

  • Q1. What's the function of wire harness.
  • Ans. 

    A wire harness is a collection of wires, cables, and connectors that transmit electrical signals and power between different components in a system.

    • Wire harnesses provide a neat and organized way to route and protect wires in a system.

    • They ensure proper connectivity and prevent wire damage or short circuits.

    • Wire harnesses simplify troubleshooting and maintenance by allowing easy identification and replacement of faulty...

  • Answered by AI
  • Q2. What is the function of sputtering.
  • Ans. 

    Sputtering is a process used in manufacturing to deposit thin films of material onto a surface.

    • Sputtering is a physical vapor deposition technique.

    • It involves bombarding a target material with high-energy ions or atoms.

    • This bombardment dislodges atoms from the target material, which then deposit onto a substrate.

    • Sputtering is commonly used in the production of semiconductor devices, solar cells, and thin film coatings.

    • ...

  • Answered by AI
Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-

I applied via Job Portal

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all Resume tips
Round 2 - HR 

(1 Question)

  • Q1. Past experience and salary exp.
Round 3 - One-on-one 

(1 Question)

  • Q1. Kpi and past exp disc.
Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(2 Questions)

  • Q1. How to increase efficiency of product
  • Ans. 

    Increasing product efficiency can be achieved through optimizing processes, improving technology, and enhancing employee skills.

    • Optimize production processes to eliminate waste and improve workflow

    • Upgrade technology to automate tasks and improve accuracy

    • Provide training and development opportunities for employees to enhance their skills and knowledge

  • Answered by AI
  • Q2. What will you change in the product
  • Ans. 

    I would improve the user interface to enhance user experience and streamline navigation.

    • Enhance user interface design for better usability

    • Streamline navigation to improve user experience

    • Implement user feedback to make necessary changes

    • Optimize performance for faster loading times

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Be confident
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
2-4 weeks
Result
Selected Selected

I applied via Approached by Company and was interviewed in Apr 2024. There was 1 interview round.

Round 1 - Technical 

(2 Questions)

  • Q1. Technical about plastic and sheet metal
  • Q2. Types of process
  • Ans. 

    Types of process include batch process, continuous process, and hybrid process.

    • Batch process involves processing a set amount of materials at one time

    • Continuous process involves ongoing production without interruption

    • Hybrid process combines elements of both batch and continuous processes

  • Answered by AI

Skills evaluated in this interview

Interview experience
3
Average
Difficulty level
-
Process Duration
2-4 weeks
Result
Selected Selected

I applied via Job Portal and was interviewed in Oct 2023. There were 2 interview rounds.

Round 1 - Coding Test 

1 hour - Trees, Array, Hashmap, DP, CP etc

Round 2 - Technical 

(1 Question)

  • Q1. Project discussion
Interview experience
3
Average
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Approached by Company and was interviewed before Jun 2022. There were 5 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all Resume tips
Round 2 - Technical 

(3 Questions)

  • Q1. Questiones based on past experience and projects
  • Q2. Reason for switching the job
  • Q3. Knowledge of CAD softwares
Round 3 - Technical 

(7 Questions)

  • Q1. What is sub cooling in air conditioning?
  • Ans. 

    Sub cooling in air conditioning is the process of cooling the refrigerant below its saturation temperature to improve system efficiency.

    • Sub cooling increases the efficiency of the air conditioning system by ensuring the refrigerant is in a liquid state before entering the expansion valve.

    • It helps in preventing flash evaporation of the refrigerant, which can lead to inefficiencies in the system.

    • Sub cooling is typically ...

  • Answered by AI
  • Q2. How is ISEER rating calculated
  • Ans. 

    ISEER rating is calculated based on the weighted average of the cooling performance of an air conditioner under different conditions.

    • ISEER = (Weighted Cooling Capacity at 100% load x 0.4) + (Weighted Cooling Capacity at 75% load x 0.2) + (Weighted Cooling Capacity at 50% load x 0.4)

    • The higher the ISEER rating, the more energy efficient the air conditioner is.

    • ISEER rating helps consumers compare the energy efficiency of...

  • Answered by AI
  • Q3. Draw the Refrigeration cycle
  • Ans. 

    The refrigeration cycle is a thermodynamic cycle used in refrigerators and air conditioning systems to transfer heat from a low temperature to a high temperature environment.

    • The cycle consists of four main components: compressor, condenser, expansion valve, and evaporator.

    • The refrigerant enters the compressor as a low-pressure gas and leaves as a high-pressure, high-temperature gas.

    • The high-pressure gas then flows into...

  • Answered by AI
  • Q4. Mainstream refrigerants used in household air conditioning
  • Ans. 

    Mainstream refrigerants used in household air conditioning include R-410A, R-22, and R-134a.

    • R-410A is a popular refrigerant known for its high efficiency and environmental friendliness.

    • R-22, although being phased out due to its ozone-depleting properties, is still commonly found in older air conditioning systems.

    • R-134a is commonly used in automotive air conditioning systems but can also be found in some household units

  • Answered by AI
  • Q5. Explain 1 ton cooling concept
  • Ans. 

    1 ton cooling concept refers to the amount of heat required to melt one ton of ice in a 24-hour period.

    • 1 ton of cooling is equal to 12,000 BTUs per hour

    • It is commonly used in the HVAC industry to measure the cooling capacity of air conditioning systems

    • For example, a 2-ton air conditioner can remove 24,000 BTUs of heat per hour

  • Answered by AI
  • Q6. Relation between current, voltage and power
  • Ans. 

    The relationship between current, voltage, and power is described by Ohm's Law, which states that current is directly proportional to voltage and inversely proportional to resistance.

    • Ohm's Law states that V = I * R, where V is voltage, I is current, and R is resistance.

    • Power (P) is calculated using the formula P = V * I, where P is power, V is voltage, and I is current.

    • In a circuit with a constant resistance, an increa...

  • Answered by AI
  • Q7. Conversion from BTU to watts and vice versa
  • Ans. 

    1 BTU is approximately equal to 0.29307107 watts. To convert BTU to watts, multiply by 0.29307107. To convert watts to BTU, divide by 0.29307107.

    • 1 BTU = 0.29307107 watts

    • To convert BTU to watts, multiply by 0.29307107

    • To convert watts to BTU, divide by 0.29307107

  • Answered by AI
Round 4 - Psychometric Test 

(1 Question)

  • Q1. No questions just test
Round 5 - HR 

(5 Questions)

  • Q1. Would you be comfortable to regularly work extra hours?
  • Q2. Introduction about yourself?
  • Q3. Why do you want to join LG/ consumer durable industry?
  • Q4. If your manager and colleagues are busy with work , how will you manage to learn the things from them?
  • Q5. Present Salary and expected salary

Interview Preparation Tips

Interview preparation tips for other job seekers - Just be confident. And make LG as your last option if you want to go in consumer durable industry.

Interview Questionnaire 

1 Question

  • Q1. All technical questions raised
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
4-6 weeks
Result
Selected Selected

I applied via Naukri.com and was interviewed before Apr 2022. There were 4 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all Resume tips
Round 2 - Technical 

(1 Question)

  • Q1. Technical abt your exp
Round 3 - Technical 

(1 Question)

  • Q1. Hod check ur confidence n general screening
  • Ans. 

    I am confident in my abilities and have a strong track record of success in my field.

    • I have a proven track record of delivering high-quality work on time and within budget.

    • I am comfortable taking on new challenges and learning new skills.

    • I am confident in my ability to work independently or as part of a team.

    • I am always looking for ways to improve my skills and knowledge.

    • I am confident in my ability to communicate effe

  • Answered by AI
Round 4 - HR 

(1 Question)

  • Q1. Salary negotiation

Interview Preparation Tips

Topics to prepare for Samsung Senior Engineer interview:
  • Study your cv
Contribute & help others!
anonymous
You can choose to be anonymous

HARMAN Interview FAQs

How many rounds are there in HARMAN Senior Consultant interview?
HARMAN interview process usually has 2 rounds. The most common rounds in the HARMAN interview process are Resume Shortlist, Aptitude Test and Group Discussion.
How to prepare for HARMAN Senior Consultant interview?
Go through your CV in detail and study all the technologies mentioned in your CV. Prepare at least two technologies or languages in depth if you are appearing for a technical interview at HARMAN. The most common topics and skills that interviewers at HARMAN expect are Data Analysis, Healthcare, MS Office, SAS and Staffing.
What are the top questions asked in HARMAN Senior Consultant interview?

Some of the top questions asked at the HARMAN Senior Consultant interview -

  1. describe LOT ru...read more
  2. episode creat...read more

Recently Viewed

LIST OF COMPANIES

Brakes India

Locations

INTERVIEWS

HARMAN

No Interviews

INTERVIEWS

Brakes India

No Interviews

INTERVIEWS

HARMAN

No Interviews

INTERVIEWS

ExxonMobil

20 top interview questions

SALARIES

Airblack

INTERVIEWS

Airblack

No Interviews

SALARIES

ExxonMobil

INTERVIEWS

Airblack

10 top interview questions

DESIGNATION

Tell us how to improve this page.

HARMAN Senior Consultant Interview Process

based on 2 interviews

Interview experience

4.5
  
Good
View more

Interview Questions from Similar Companies

Google Interview Questions
4.4
 • 825 Interviews
Samsung Interview Questions
3.9
 • 545 Interviews
Dell Interview Questions
4.0
 • 386 Interviews
OPPO Interview Questions
4.0
 • 209 Interviews
LG Electronics Interview Questions
4.0
 • 196 Interviews
Vivo Interview Questions
4.1
 • 193 Interviews
Philips Interview Questions
3.9
 • 157 Interviews
Daikin Interview Questions
4.2
 • 146 Interviews
View all
HARMAN Senior Consultant Salary
based on 84 salaries
₹9 L/yr - ₹32 L/yr
10% more than the average Senior Consultant Salary in India
View more details

HARMAN Senior Consultant Reviews and Ratings

based on 13 reviews

3.1/5

Rating in categories

2.6

Skill development

3.9

Work-life balance

2.9

Salary

3.8

Job security

3.4

Company culture

2.2

Promotions

2.7

Work satisfaction

Explore 13 Reviews and Ratings
Senior Consultant

Bangalore / Bengaluru

3-5 Yrs

₹ 17-21 LPA

Explore more jobs
Senior Software Engineer
1.7k salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Technical Lead
1.5k salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Software Engineer
1.3k salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Senior Engineer
931 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Senior Product Engineer
904 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Explore more salaries
Compare HARMAN with

Bose

3.8
Compare

Jbl

3.8
Compare

Sennheiser

4.9
Compare

Sony

4.2
Compare
Did you find this page helpful?
Yes No
write
Share an Interview