Filter interviews by
I applied via Approached by Company and was interviewed before Oct 2021. There were 2 interview rounds.
Top trending discussions
posted on 2 Apr 2024
The length of the jib on a tower crane varies depending on the specific model and job requirements.
The length of the jib can range from 30 meters to over 80 meters.
The length of the jib is typically specified in the crane's technical specifications.
The longer the jib, the greater the reach and lifting capacity of the crane.
Different jobs may require different jib lengths to reach specific heights or distances.
F.T.C. stands for Free to Climb and G.T.C. stands for Ground to Cab. They are safety procedures for tower crane operators.
F.T.C. (Free to Climb) means the crane operator is free to climb up the tower crane to access the cab.
G.T.C. (Ground to Cab) means the crane operator must access the cab from the ground level using the designated access ladder or stairs.
These safety procedures help ensure that the crane operator saf...
A safety device is a mechanism or system designed to prevent accidents or injuries in the workplace.
Safety devices can include things like guardrails, harnesses, emergency stop buttons, and warning alarms.
These devices are essential for protecting workers and preventing accidents on construction sites.
For example, a fall arrest system is a safety device used to prevent workers from falling while working at heights.
Safety devices on a tower crane include limit switches, overload sensors, anti-collision systems, and emergency stop buttons.
Limit switches are used to prevent the crane from moving beyond certain limits.
Overload sensors alert operators when the crane is carrying too much weight.
Anti-collision systems help prevent accidents by detecting nearby objects or other cranes.
Emergency stop buttons allow operators to quickly st
The tone of the crane is determined by the operator's communication with hand signals or radio.
The tone of the crane is typically communicated through hand signals or radio communication.
The operator must be able to understand and respond to the tone set by the signaler or supervisor.
Clear and effective communication is essential to ensure the safe and efficient operation of the crane.
I applied via Company Website and was interviewed in Oct 2024. There were 4 interview rounds.
EOT crane stands for Electric Overhead Traveling crane, which is a type of crane used for lifting and moving heavy loads in industrial settings.
EOT crane is commonly used in factories, warehouses, and construction sites.
It is operated using electricity for lifting and moving heavy objects.
EOT cranes are equipped with a hoist, trolley, and bridge for efficient material handling.
Examples of EOT crane manufacturers includ
Light/hooter Runing time mobile phone not use
2prakar gravit/rotary
Digital Subscriber Line
DSL stands for Digital Subscriber Line
It is a type of technology that provides internet access through telephone lines
DSL allows for faster internet speeds compared to traditional dial-up connections
I applied via Naukri.com and was interviewed before Apr 2023. There was 1 interview round.
Shift beginning While operating crane . Ist we discussed with incharge and line operator and rigger..
posted on 2 Apr 2024
The length of the jib on a tower crane varies depending on the specific model and job requirements.
The length of the jib can range from 30 meters to over 80 meters.
The length of the jib is typically specified in the crane's technical specifications.
The longer the jib, the greater the reach and lifting capacity of the crane.
Different jobs may require different jib lengths to reach specific heights or distances.
F.T.C. stands for Free to Climb and G.T.C. stands for Ground to Cab. They are safety procedures for tower crane operators.
F.T.C. (Free to Climb) means the crane operator is free to climb up the tower crane to access the cab.
G.T.C. (Ground to Cab) means the crane operator must access the cab from the ground level using the designated access ladder or stairs.
These safety procedures help ensure that the crane operator saf...
A safety device is a mechanism or system designed to prevent accidents or injuries in the workplace.
Safety devices can include things like guardrails, harnesses, emergency stop buttons, and warning alarms.
These devices are essential for protecting workers and preventing accidents on construction sites.
For example, a fall arrest system is a safety device used to prevent workers from falling while working at heights.
Safety devices on a tower crane include limit switches, overload sensors, anti-collision systems, and emergency stop buttons.
Limit switches are used to prevent the crane from moving beyond certain limits.
Overload sensors alert operators when the crane is carrying too much weight.
Anti-collision systems help prevent accidents by detecting nearby objects or other cranes.
Emergency stop buttons allow operators to quickly st
The tone of the crane is determined by the operator's communication with hand signals or radio.
The tone of the crane is typically communicated through hand signals or radio communication.
The operator must be able to understand and respond to the tone set by the signaler or supervisor.
Clear and effective communication is essential to ensure the safe and efficient operation of the crane.
I applied via Approached by Company and was interviewed before Jun 2021. There was 1 interview round.
This question seems to be related to electrical or technical terminology.
The question may be asking about the status of a DSL (Digital Subscriber Line) connection being full from a LT (Local Terminal) connection being full.
It could be related to network or internet connectivity issues.
The question may be seeking troubleshooting steps or solutions for resolving the issue.
The question seems to be asking about the full capacity of an EOT crane.
EOT crane refers to Electric Overhead Traveling crane, which is used for lifting and moving heavy loads.
The 'c t full' likely refers to the full capacity of the crane, which is the maximum weight it can lift safely.
To determine the full capacity of an EOT crane, you need to consider factors like the type of crane, its design specifications, and any...
I applied via Naukri.com and was interviewed in Jan 2024. There was 1 interview round.
EOT stands for Electric Overhead Traveling crane, which is a type of crane used for lifting and moving heavy loads in industrial settings.
EOT stands for Electric Overhead Traveling crane
It is commonly used in industrial settings for lifting and moving heavy loads
EOT cranes are operated using electricity for smooth and efficient operation
Limit switches are safety devices used to prevent the crane from overtraveling or overloading.
Limit switches are installed on cranes to set boundaries for the crane's movement.
They are used to prevent the crane from overtraveling in any direction.
Limit switches can also be used to prevent overloading by stopping the crane when it reaches a certain weight limit.
Common types of limit switches include lever-operated, push
I applied via Company Website and was interviewed in Jan 2024. There were 2 interview rounds.
A limit switch is a device used in cranes to control the movement and prevent overtravel.
Limit switches are used to set boundaries for the crane's movement.
They are typically placed at the ends of the crane's travel path.
When the crane reaches a limit switch, it triggers a signal to stop or change direction.
Limit switches help prevent accidents and damage by preventing the crane from overtraveling.
Examples of limit swi...
Rotary and gravity are concepts related to the operation of cranes.
Rotary refers to the ability of a crane to rotate or swivel horizontally.
Gravity refers to the force that pulls objects towards the center of the earth.
In the context of crane operation, rotary is used to position the crane's boom and load in different directions.
Gravity plays a crucial role in crane operation as it determines the stability and balance ...
An overhead crane operator is responsible for operating and controlling overhead cranes to lift, move, and position heavy loads.
Operate and control overhead cranes
Lift, move, and position heavy loads
Ensure safety protocols are followed
Inspect and maintain equipment
Communicate with team members and follow instructions
posted on 24 Jan 2024
I applied via Company Website and was interviewed in Dec 2023. There was 1 interview round.
based on 1 review
Rating in categories
HSE Officer
16
salaries
| ₹5 L/yr - ₹12.1 L/yr |
Safety Officer
12
salaries
| ₹9.6 L/yr - ₹12.3 L/yr |
Quantity Surveyor
8
salaries
| ₹4.8 L/yr - ₹16 L/yr |
Planning Engineer
8
salaries
| ₹6.8 L/yr - ₹18 L/yr |
Piping Supervisor
6
salaries
| ₹8 L/yr - ₹20 L/yr |
Larsen & Toubro Limited
Shapoorji Pallonji Group
Tata Projects
Hindustan Construction Company