Filter interviews by
I applied via Campus Placement and was interviewed in Sep 2020. There were 3 interview rounds.
Pumps: centrifugal, positive displacement, axial flow. Compressors: reciprocating, rotary, centrifugal.
Centrifugal pumps use a rotating impeller to move fluid.
Positive displacement pumps move fluid by trapping a fixed amount and forcing it through the discharge.
Axial flow pumps use propellers to move fluid.
Reciprocating compressors use pistons to compress gas.
Rotary compressors use rotating screws or vanes to compress ...
Characteristic curve of a pump shows the relationship between flow rate and head developed by the pump.
It is a graph plotted between flow rate and head developed by the pump.
It helps in determining the efficiency of the pump.
The curve is obtained by conducting experiments on the pump.
It is used to select the appropriate pump for a given application.
Shutoff pressure is the maximum pressure a pump can generate when it is not pumping any fluid.
Shutoff pressure is also known as deadhead pressure.
It is the pressure at which the pump can no longer move any fluid.
It is important to know the shutoff pressure to prevent damage to the pump and system.
For example, if the shutoff pressure of a pump is 100 psi, the pump will stop generating flow when the pressure in the syste
Types of columns and their selection criteria for engineering projects.
Types of columns include steel, concrete, timber, and composite columns.
Selection criteria depend on factors such as load capacity, material availability, and cost.
For example, steel columns are often used in high-rise buildings due to their strength and durability.
Concrete columns are preferred for their fire resistance and low maintenance.
Timber c...
Design of column, heat exchanger, and centrifugal pump involves various factors such as fluid properties, operating conditions, and material selection.
Column design involves determining the column diameter, height, and packing material based on the required separation efficiency and pressure drop.
Heat exchanger design involves selecting the appropriate type of exchanger, determining the heat transfer area, and selectin...
Joule-Thomson coefficient is the change in temperature of a gas when it is allowed to expand or contract without any work being done.
It is a measure of the rate of change of temperature with respect to pressure at constant enthalpy.
It is used in cryogenic technology to determine the cooling effect of a gas when it expands through a valve or porous plug.
The coefficient can be positive or negative depending on the gas an...
Refrigeration cycle is a thermodynamic process used in refrigerators and air conditioners to transfer heat from a low-temperature region to a high-temperature region.
The cycle consists of four main components: compressor, condenser, expansion valve, and evaporator.
The refrigerant is compressed by the compressor and then condensed in the condenser, releasing heat to the surroundings.
The high-pressure liquid refrigerant ...
Top trending discussions
posted on 14 Dec 2019
I applied via Campus Placement and was interviewed in Jun 2019. There were 5 interview rounds.
Herbicide is a type of pesticide used to kill unwanted plants.
Herbicides are chemicals that are used to control or kill unwanted plants.
They are commonly used in agriculture to prevent weeds from competing with crops.
Some herbicides are selective, meaning they only target specific types of plants, while others are non-selective and will kill any plant they come into contact with.
Examples of herbicides include glyphosat...
PI Industries is a leading agrochemical company in India that manufactures and supplies a wide range of products.
Nominee Gold
Fame Granules
Fame Insecticide
Ankur
Fame 1% Dust
Fame 2.5% Dust
Fame 5% Dust
Fame 25% WG
Fame 40% SC
Fame 50% SP
Fame 80% WP
Fame 20% EC
Fame 75% WP
Fame 50% WG
Fame 20% WG
Fame 25% SC
Fame 10% EC
Fame 20% SP
Fame 40% WG
Fame 50% EC
Fame 60% WP
Fame 70% WP
Fame 80% WDG
Fame 90% WDG
Fame 95% TC
Fame 97% TC
Fame 98% TC
Fam
Bernoulli's theorem explains the relationship between fluid speed and pressure.
Bernoulli's theorem states that as the speed of a fluid increases, its pressure decreases.
It is important in industries such as aviation, where it is used to design wings and airfoils.
It is also used in the design of pipelines and pumps.
Limitations include the assumption of incompressible and non-viscous fluids, and the neglect of friction a...
Pump is used to transfer fluids from one place to another while compressor is used to compress gases.
Pump is used to move fluids like water, oil, etc. from one place to another.
Compressor is used to compress gases like air, refrigerant, etc.
Pumps are used in industries, households, and agriculture while compressors are used in refrigeration, air conditioning, and gas pipelines.
Pumps have a lower pressure ratio while co...
Closing a shutoff valve while the pump is running dry can cause damage to the pump and other components.
The pump will continue to run but without any fluid to circulate, causing it to overheat and potentially seize.
The lack of fluid can also cause damage to the impeller and other internal components.
The pressure in the system can also increase, leading to potential leaks or bursts in the pipeline.
It is important to ens...
Closing the shutoff valve while pumping in a centrifugal pump can cause damage to the pump and the piping system.
The pump will continue to generate pressure, leading to a buildup of pressure in the piping system.
This can cause the pump to overheat and potentially damage the impeller.
The piping system may also experience damage due to the increased pressure.
It is important to ensure that the shutoff valve is only closed...
Connecting pumps in series increases head while connecting in parallel increases flow rate.
Connecting pumps in series increases the total head of the system while connecting in parallel increases the total flow rate.
In series connection, the discharge remains the same while the head increases.
In parallel connection, the head remains the same while the discharge increases.
Series connection is used when high head is requ...
Dimensions of power, energy, force and acceleration.
Power is measured in watts (W) and is the rate at which work is done.
Energy is measured in joules (J) and is the capacity to do work.
Force is measured in newtons (N) and is the push or pull on an object.
Acceleration is measured in meters per second squared (m/s^2) and is the rate of change of velocity.
Valves are mechanical devices used to control the flow of fluids or gases.
Valves are used in various industries such as oil and gas, water treatment, and chemical processing.
They can be classified into different types such as gate valves, ball valves, and butterfly valves.
Valves can be operated manually or automatically using actuators.
They play a crucial role in maintaining the safety and efficiency of industrial proc...
Types of what? Please provide more context.
Please provide more context for the question.
Without context, it is impossible to provide a meaningful answer.
Types can refer to many different things, such as types of engineering, types of materials, types of software, etc.
posted on 8 Jul 2021
posted on 12 Jul 2022
I applied via Campus Placement and was interviewed before Jul 2021. There were 2 interview rounds.
Most questions related to RCC and soile
Grade in cement refers to the strength of the cement mixture.
Grade in cement is a measure of the compressive strength of the cement mixture.
It is usually denoted by a number, such as 32.5 or 42.5, which indicates the strength in megapascals (MPa).
Higher grade cement is used for construction of structures that require higher strength, such as bridges and high-rise buildings.
The grade of cement is determined by testing t...
posted on 5 Nov 2024
I appeared for an interview in Oct 2024.
Heat of formation is the energy released or absorbed when one mole of a compound is formed from its elements in their standard states.
Heat of formation is also known as standard enthalpy of formation.
It is typically measured in units of kJ/mol.
Negative heat of formation indicates exothermic reaction, while positive heat of formation indicates endothermic reaction.
For example, the heat of formation of water (H2O) is -28
Heat of reaction is the amount of heat released or absorbed during a chemical reaction.
Heat of reaction can be exothermic (heat released) or endothermic (heat absorbed).
It is typically measured in units of joules or calories.
Examples include combustion reactions releasing heat and photosynthesis reactions absorbing heat.
posted on 10 Feb 2023
I applied via Campus Placement and was interviewed in Jan 2023. There were 3 interview rounds.
Questions regarding chemical engineering subjects
posted on 17 Aug 2021
posted on 19 Sep 2023
I applied via Campus Placement and was interviewed in Mar 2023. There were 3 interview rounds.
Transformer protection is essential to prevent damage and ensure reliable operation.
Types of protection include overcurrent, overvoltage, differential, and thermal protection.
Relays are used to detect faults and initiate protective actions.
Buchholz relay is used for detecting internal faults in oil-filled transformers.
Pressure relief devices are installed to prevent explosion in case of internal faults.
Regular maintena...
posted on 9 Nov 2023
I appeared for an interview before Nov 2022.
Gk topics in a group of 10-12 members
I applied via Campus Placement and was interviewed before Jan 2022. There were 4 interview rounds.
10 people in one group, topic drone technology
Modes of heat transfer include conduction, convection, and radiation.
Conduction is the transfer of heat through a material without any movement of the material itself.
Convection is the transfer of heat through the movement of fluids, such as air or water.
Radiation is the transfer of heat through electromagnetic waves, such as the heat from the sun.
Examples of conduction include touching a hot stove or holding a cold dr...
Design of distillation column involves determining the number of trays, column diameter, and feed location.
The number of trays is determined by the separation required and the reflux ratio.
Column diameter is determined by the vapor and liquid flow rates.
Feed location is determined by the composition of the feed and the desired product purity.
Other factors to consider include pressure drop, heat transfer, and material s...
Yes, I am willing to work in Jammu.
I am open to working in any location assigned to me
I am adaptable and can adjust to new environments
I am excited to explore new places and cultures
I have worked in different cities before and have had positive experiences
Some of the top questions asked at the Gujarat Narmada Valley Fertilizers & Chemicals Graduate Engineer Trainee (Get) interview -
Fireman
26
salaries
| ₹1.4 L/yr - ₹2.7 L/yr |
Manager
24
salaries
| ₹12 L/yr - ₹26 L/yr |
Mechanical Engineer
15
salaries
| ₹2.6 L/yr - ₹12 L/yr |
Senior Shift Engineer
12
salaries
| ₹13.2 L/yr - ₹20 L/yr |
Senior Manager
11
salaries
| ₹16 L/yr - ₹36.5 L/yr |
Aarti Industries
UPL
Coromandel International
PI Industries