Upload Button Icon Add office photos

GRP

Compare button icon Compare button icon Compare

Filter interviews by

GRP Assistant Manager- Purchase Interview Questions and Answers

Updated 27 Feb 2023

GRP Assistant Manager- Purchase Interview Experiences

1 interview found

Interview experience
1
Bad
Difficulty level
Moderate
Process Duration
2-4 weeks
Result
Not Selected

I applied via Recruitment Consulltant and was interviewed in Aug 2022. There were 5 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Don’t add your photo or details such as gender, age, and address in your resume. These details do not add any value.
View all tips
Round 2 - One-on-one 

(1 Question)

  • Q1. Just ask about Myself, technical knowledge, SAP knowledge, Current Job profile Etc.
Round 3 - HR 

(1 Question)

  • Q1. Why do you want to change your job? Ask about Strength & Weekness, What is your current package & Expected CTC, Discussed about job profile, Guided me understand about company profile & products etc.
Round 4 - Technical 

(1 Question)

  • Q1. He checked my professional knowledge, my daily work routine, handling power of requirements, SAP knowledge, cost saving factor, my action plan towards any emergency situation arise, my sources of getting r...
Round 5 - One-on-one 

(1 Question)

  • Q1. Once again he checked my knowledge, my abilities, my attitude towords job, Negotiation skill, one on one discussion about my current profile, my role & responsibilities, my work structure etc. After comple...

Interview Preparation Tips

Interview preparation tips for other job seekers - Be aware, dont share documents first either you are confirm selected for role.

Interview questions from similar companies

I appeared for an interview in Jan 2022.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(2 Questions)

  • Q1. Zero base costing ,strategic sourcing
  • Ans. Step by step consider costing wrt time that is zero base costing
  • Answered by govind kumar pal
  • Q2. Pre treatment process
Round 3 - HR 

(1 Question)

  • Q1. Why are leaving your current company

Interview Preparation Tips

Interview preparation tips for other job seekers - Be confident and listen every questing carefully

Interview Questionnaire 

3 Questions

  • Q1. Regarding some steel grade
  • Q2. Regarding ctc and date of joini g after geting of offer
  • Q3. About transporting

Interview Preparation Tips

Round: Group Discussion
Experience: Some technical discussion regarding alloy steel making

I applied via Recruitment Consultant and was interviewed in Nov 2019. There were 3 interview rounds.

Interview Questionnaire 

4 Questions

  • Q1. Qms related all questions (ISO/IATF). And how development of products in process, Processe controls
  • Q2. How can improve communication and personality
  • Ans. 

    Improving communication and personality requires self-awareness, active listening, and continuous learning.

    • Practice active listening to understand others' perspectives

    • Be aware of your own communication style and adjust as needed

    • Seek feedback and be open to constructive criticism

    • Read books or take courses on communication and interpersonal skills

    • Practice empathy and emotional intelligence

    • Be respectful and courteous in a

  • Answered by AI
  • Q3. How can show your potential
  • Q4. How can show first impressions
  • Ans. 

    First impressions can be shown through body language, attire, and communication skills.

    • Body language can convey confidence or nervousness

    • Attire can show professionalism or lack thereof

    • Communication skills can demonstrate intelligence and articulation

    • Eye contact and a firm handshake can also make a positive impression

  • Answered by AI

I applied via Recruitment Consultant and was interviewed in Jan 2020. There were 3 interview rounds.

Interview Questionnaire 

4 Questions

  • Q1. Q1. What is MHr ? And how costing is done ?
  • Ans. 

    MHr stands for Man-Hour. Costing is done by calculating the total number of man-hours required for a task and multiplying it by the cost per hour.

    • MHr stands for Man-Hour, which is a unit of measurement for the amount of work performed by an individual in one hour.

    • Costing is done by determining the total number of man-hours required for a specific task or project.

    • The cost per hour is then multiplied by the total number ...

  • Answered by AI
  • Q2. Q2. Current pricing of ADC 12 & plastic resins.
  • Ans. 

    I do not have the current pricing information for ADC 12 & plastic resins.

    • I apologize, but I do not have the current pricing information for ADC 12 & plastic resins.

    • I would need to conduct research or consult with a colleague who has access to this information.

    • Pricing for these materials can fluctuate frequently based on market demand and other factors.

  • Answered by AI
  • Q3. Q3. How you do costing of Plastic & Casting parts.
  • Ans. 

    Costing of plastic and casting parts involves analyzing material costs, production processes, and overhead expenses.

    • Analyze the material costs by considering the type and quantity of plastic or casting material required.

    • Evaluate the production processes involved in manufacturing the parts, including molding or casting techniques.

    • Consider the labor costs, machine costs, and energy costs associated with the production pr...

  • Answered by AI
  • Q4. Q4. To give you a plastic part, & you have to analyse on what machine it will run & it's tool cost.
  • Ans. 

    To determine the machine and tool cost for a plastic part.

    • Analyze the dimensions and material of the plastic part

    • Identify the required tolerances and surface finish

    • Consider the production volume and lead time

    • Research the available machines and their capabilities

    • Calculate the tooling cost based on the chosen machine

    • Consider the maintenance and operating costs of the machine

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - You should be confident what you are saying. If you don't know answer , directly say "i couldn't recall" don't bluff.
Be a gem in your area, if you don't have any answer ,show them your capabilities that you can do it when you ll be given the task.

I applied via Naukri.com and was interviewed before Aug 2020. There was 1 interview round.

Interview Questionnaire 

1 Question

  • Q1. Rules and regulations , work position

Interview Preparation Tips

Interview preparation tips for other job seekers - The interview was a technical it lasted for 30 minutes. The interviewer wanted to test my knowledge and communication skills mostly questions asked to my work related

I applied via Recruitment Consulltant and was interviewed before Jul 2021. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - HR 

(3 Questions)

  • Q1. Basic information about current role and responsibilities
  • Q2. Why you want to change the current company
  • Q3. Family background and qualifications

Interview Preparation Tips

Interview preparation tips for other job seekers - Be confident to give answer. Not hesitate during interaction

I applied via Recruitment Consultant and was interviewed before Oct 2020. There were 3 interview rounds.

Interview Questionnaire 

5 Questions

  • Q1. Which vehicle license you have?
  • Ans. 

    I have a valid driver's license for both cars and motorcycles.

    • I have a Class C license for cars

    • I also have a Class M license for motorcycles

    • I have a clean driving record with no accidents or violations

  • Answered by AI
  • Q2. What is CBS & ABS
  • Q3. Which segment of bike you ride
  • Ans. 

    I ride a road bike for commuting and a mountain bike for leisure.

    • I prefer road bikes for their speed and efficiency on paved roads.

    • I enjoy mountain biking for the challenge and adventure of off-road trails.

    • I also have experience with hybrid bikes for their versatility.

    • I prioritize safety and always wear a helmet and follow traffic laws.

    • I have participated in charity rides and group rides for fun and community.

  • Answered by AI
  • Q4. How you do the vehicle testing
  • Ans. 

    Vehicle testing involves various methods to ensure safety, performance, and compliance with regulations.

    • Testing can include physical tests such as crash tests, durability tests, and performance tests.

    • Simulation and modeling can also be used to test vehicle components and systems.

    • Testing must comply with regulations set by organizations such as the National Highway Traffic Safety Administration (NHTSA) and the European

  • Answered by AI
  • Q5. Which type of Homologation testing you do?
  • Ans. 

    We conduct various types of homologation testing depending on the product and its intended market.

    • We conduct safety testing to ensure compliance with local regulations.

    • We perform emissions testing to ensure compliance with environmental regulations.

    • We conduct performance testing to ensure the product meets the required standards.

    • We also conduct durability testing to ensure the product can withstand the expected wear an...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - That question were ask me for vehicle testing engineer & for test rider position

Interview Questionnaire 

1 Question

  • Q1. Work in shifts, Qcc , Line balancing , Kaziens , Achievement in your experience individually and in team .

I applied via Company Website and was interviewed in Nov 2020. There were 3 interview rounds.

Interview Questionnaire 

1 Question

  • Q1. Can I join minda no any reference

Interview Preparation Tips

Interview preparation tips for other job seekers - Interview was taken from my skills ass manufacturing , Quality ,5s ,Kaizen & Tpm. It's my job profile.my education is Iti,& Diploma in mechanical (advanced). My best in performance is Target achievment.

GRP Interview FAQs

How many rounds are there in GRP Assistant Manager- Purchase interview?
GRP interview process usually has 5 rounds. The most common rounds in the GRP interview process are One-on-one Round, Resume Shortlist and HR.

Tell us how to improve this page.

GRP Assistant Manager- Purchase Interview Process

based on 1 interview

Interview experience

1
  
Bad
View more

Interview Questions from Similar Companies

JBM Group Interview Questions
4.0
 • 280 Interviews
Subros Interview Questions
3.8
 • 168 Interviews
Spark Minda Interview Questions
3.9
 • 122 Interviews
Gabriel India Interview Questions
4.2
 • 99 Interviews
NBC Bearings Interview Questions
3.8
 • 84 Interviews
DENSO Interview Questions
4.1
 • 77 Interviews
CIE Automotive Interview Questions
3.6
 • 76 Interviews
View all
Assistant Manager
16 salaries
unlock blur

₹4 L/yr - ₹11 L/yr

Manager
12 salaries
unlock blur

₹10.8 L/yr - ₹18 L/yr

Executive Production
7 salaries
unlock blur

₹2.5 L/yr - ₹6 L/yr

Production Associate
7 salaries
unlock blur

₹2.5 L/yr - ₹5.2 L/yr

HR Executive
7 salaries
unlock blur

₹3.3 L/yr - ₹4.6 L/yr

Explore more salaries
Compare GRP with

JBM Group

4.0
Compare

Subros

3.8
Compare

Endurance Technologies

3.9
Compare

Spark Minda

3.9
Compare
Did you find this page helpful?
Yes No
write
Share an Interview