Greatship (India) Interview Questions and Answers

Q1. Health and wealth is very important of life?
Ans. 
Health and wealth are both important aspects of life, but they should be balanced for overall well-being.
• Both health and wealth contribute to overall well-being and quality of life.

• Health is essential for physical and mental well-being, while wealth provides financial security and opportunities.

• It is important to prioritize both health and wealth, as neglecting one can impact the other.

• Examples: Regular exercise and a ...read more
Answered by AI
Add your answer
Q2. Beutiful life at sea?
Ans. 
Life at sea can be beautiful with stunning sunsets, peaceful moments, and a sense of freedom.
• Stunning sunsets over the water

• Peaceful moments listening to the sound of the waves

• Sense of freedom and adventure

• Opportunity to see marine life up close

• Connection with nature and the elements
Answered by AI
Add your answer
Q3. Hard work and safe work?
Add your answer

Q1. Preventive Maintenance of All Kinds of H.V & LV Breakers, Motors, Voltage Up To 33 KV & 11 KV & 6.6.KV /2400 KW ,Transformer(15.75KV /230 KV ), Corrective Maintenance of HV/MV /LV Switches gears,VCB,AC...read more
Ans. 
Preventive and corrective maintenance of various electrical equipment including breakers, motors, transformers, and relays.
• Perform regular maintenance on high and low voltage breakers, motors, and transformers.

• Test and calibrate various protection relays for motors, transformers, and generators.

• Conduct transformer oil BDV test, thermal scanning, and earth fault and prediction tests.

• Terminate high voltage motors, instal...read more
Answered by AI
View 1 more answer
Q2. Preventive Maintenance of All Kinds of H.V & LV Breakers, Motors, Voltage Up To 33 KV & 11 KV & 6.6.KV /2400 KW ,Transformer(15.75KV /230 KV ), Corrective Maintenance of HV/MV /LV Switches gears,VCB,AC...read more
Ans. 
Preventive and corrective maintenance of various electrical equipment including breakers, motors, transformers, and relays.
• Perform regular maintenance tasks on high and low voltage breakers, motors, and transformers.

• Test and calibrate protection relays for motors, transformers, and generators.

• Conduct transformer oil BDV tests, thermal scanning, and earth fault and prediction tests.

• Terminate high voltage motors, install...read more
Answered by AI
Add your answer
Q3. Preventive Maintenance of All Kinds of H.V & LV Breakers, Motors, Voltage Up To 33 KV & 11 KV & 6.6.KV /2400 KW ,Transformer(15.75KV /230 KV ), Corrective Maintenance of HV/MV /LV Switches gears,VCB,AC...read more
Ans. 
Preventive and corrective maintenance of various electrical equipment including breakers, motors, transformers, switches, relays, and testing/calibration of protections.
• Preventive maintenance of H.V & LV breakers, motors, transformers, switches, etc.

• Corrective maintenance of HV/MV/LV switchgears, breakers, cubicles, etc.

• Testing and calibration of various protection relays for motors, transformers, generators.

• Transforme...read more
Answered by AI
View 3 more answers

Q1. What is Ovality allowed in piping
Ans. 
Ovality allowed in piping refers to the maximum allowable deviation from a perfect circle shape in the pipe.
• Ovality is typically expressed as a percentage of the pipe's diameter.

• The standard ovality allowed in piping is usually around 1% to 3%.

• Excessive ovality can lead to issues such as leaks, pressure drops, and flow restrictions.

• Ovality can be measured using tools like calipers or laser measurement devices.
Answered by AI
Add your answer
Q2. How to manage the difference of welding quantity vs reporatable. How to control
Ans. 
Managing welding quantity discrepancies requires proper tracking, communication, and quality control measures.
• Implement a robust tracking system to monitor welding quantities and compare them to the reportable figures.

• Regularly communicate with the welding team to ensure accurate reporting of work done.

• Conduct quality control checks to verify the accuracy of welding quantities and address any discrepancies promptly.

• Uti...read more
Answered by AI
Add your answer

Read the general question about piping and other

Q1. How many years experience?
View 3 more answers
Q2. What is tha qualification?
Ans. 
The qualification for an Instrumentation Technician typically includes a degree or diploma in instrumentation technology or a related field.
• A degree or diploma in instrumentation technology or a related field is usually required.

• Knowledge of electrical and electronic systems is important.

• Experience with calibration and troubleshooting of instruments is often necessary.

• Familiarity with industry standards and regulations...read more
Answered by AI
View 2 more answers
Q3. Is currently working?
Add your answer
Q4. Before working company
Add your answer

Q1. What is Thermocouple range?
Ans. 
Thermocouple range refers to the temperature range within which a thermocouple can accurately measure temperature.
• Thermocouple range varies depending on the type of thermocouple used.

• Common thermocouple types include J, K, T, E, and N.

• For example, a type K thermocouple has a range of -200 to 1350 degrees Celsius.

• It is important to select the appropriate thermocouple type for the temperature range being measured.
Answered by AI
Add your answer
Q2. What is anti surge valve?
Ans. 
An anti-surge valve is a control valve used in a compressor system to prevent surge and maintain stable operation.
• An anti-surge valve is typically installed in the discharge line of a compressor.

• It is designed to protect the compressor from surge, which is a phenomenon of unstable flow and pressure that can cause damage to the compressor.

• The valve opens or closes based on the compressor's operating conditions to mainta...read more
Answered by AI
View 1 more answer
Q3. Are you working gas turbine?
Ans. 
Yes, I have experience working with gas turbines.
• I have worked with gas turbines in my previous job as an instrumentation technician.

• I am familiar with the maintenance and troubleshooting of gas turbines.

• I have experience in calibrating and testing gas turbine sensors and instruments.

• I have knowledge of the safety protocols and regulations related to gas turbines.
Answered by AI
Add your answer
Q4. How many types vibration is there in field?
Ans. 
There are three types of vibration in the field: axial, radial, and tangential.
• Axial vibration occurs parallel to the axis of rotation.

• Radial vibration occurs perpendicular to the axis of rotation.

• Tangential vibration occurs at a right angle to both axial and radial vibration.

• Vibration analysis is used to detect and diagnose problems in rotating machinery.

• Excessive vibration can lead to premature failure of bearings, g
Answered by AI
View 1 more answer
Q5. Are you know that preventive maintenance jobs?
Ans. 
Yes, I am familiar with preventive maintenance jobs.
• Preventive maintenance involves regularly scheduled inspections, cleaning, and repairs to prevent equipment breakdowns.

• I have experience performing preventive maintenance on various types of instrumentation equipment, such as calibrators, transmitters, and controllers.

• Examples of preventive maintenance tasks I have performed include checking for leaks, replacing worn ...read more
Answered by AI
View 1 more answer

Q1. Are you instrument technician?
Add your answer
Q2. What kind of precautions need in Plant running time?
Ans. 
Precautions are necessary to ensure safe and efficient plant operation.
• Regular maintenance of equipment and machinery

• Proper training and certification of personnel

• Strict adherence to safety protocols and procedures

• Regular inspections and audits to identify potential hazards

• Effective communication and coordination among team members

• Use of personal protective equipment (PPE) as required

• Emergency response planning and dri...read more
Answered by AI
Add your answer

I am interested to work in maintenance field and troubleshooting

Q1. Why you choose our company
Add your answer
Q2. I want to any company but I love my job
Add your answer
Q3. How much want you salary
Add your answer
Q4. I want to 5000 dhirams
Add your answer

Q1. What's the compressor
Ans. 
A compressor is a mechanical device that increases the pressure of a gas by reducing its volume.
• Compressors are commonly used in various industries, including painting, to supply compressed air for tools and equipment.

• They work by drawing in air and then compressing it to a higher pressure before releasing it.

• Compressors can be powered by electricity, gasoline, or diesel engines.

• They come in different types, such as re...read more
Answered by AI
View 2 more answers
Q2. What is the blasting nozzle size
Ans. 
The blasting nozzle size depends on the type of blasting being done and the material being blasted.
• The blasting nozzle size can range from 1/8 inch to 1 inch or more.

• For fine blasting, a smaller nozzle size is used, while for heavy-duty blasting, a larger nozzle size is used.

• The material being blasted also affects the nozzle size, as harder materials require a larger nozzle size.

• The blasting pressure and distance from ...read more
Answered by AI
View 2 more answers
Q3. Steel structure painting council
Add your answer

Q1. Approved protective coating syi
Add your answer

IAM a graduate becom

Q1. About material science stress strain curve
Add your answer
Q2. About GD&T symbol details
Add your answer
Q3. What is factor of safety
Ans. 
Factor of safety is the ratio of the maximum stress a material can withstand to the actual stress it is subjected to.
• Factor of safety is used to ensure that a structure or component can withstand loads and stresses beyond what it is designed for.

• It is calculated by dividing the ultimate strength of a material by the maximum stress it is expected to experience.

• A factor of safety of 2 means that the material can withstan...read more
Answered by AI
Add your answer

Q1. About the current industry
Add your answer
Q2. What is your role in current company
Ans. 
I am responsible for designing and developing new products in my current company.
• Designing and developing new products

• Collaborating with cross-functional teams

• Creating detailed engineering drawings

• Conducting feasibility studies

• Testing and evaluating prototypes

• Implementing design improvements based on feedback

• Ensuring compliance with industry standards and regulations
Answered by AI
View 1 more answer
Q3. Where do you see yourself after 5 years
Ans. 
In 5 years, I see myself as a senior design engineer leading a team and working on innovative projects.
• Leading a team of design engineers

• Working on innovative and challenging projects

• Continuously learning and improving my skills

• Contributing to the growth and success of the company
Answered by AI
Add your answer

Q1. What is your salary expectation
Ans. 
I would expect a salary that is competitive with industry standards and reflects my experience and skills as a Design Engineer.
• I would like my salary to be commensurate with my qualifications and the responsibilities of the position.

• I have researched the average salary range for Design Engineers in this location and industry.

• I am open to negotiation and would consider a comprehensive compensation package that includes ...read more
Answered by AI
Add your answer