Filter interviews by
The density of construction materials varies depending on the type of material. Cement, steel, gypsum, and flooring tiles all have different densities.
Cement typically has a density of around 1440 kg/m^3.
Steel has a density of approximately 7850 kg/m^3.
Gypsum has a density of about 2320 kg/m^3.
Flooring tiles can have varying densities depending on the material used, such as ceramic tiles having a density of around 2500
The standard shower height in a bathroom is typically around 80 inches (6 feet 8 inches) from the floor to the shower head.
Standard shower height is around 80 inches from the floor to the shower head
The height can vary based on personal preference and accessibility needs
Consider the height of the tallest person using the shower when determining the height
Built-up area can be calculated by adding the total area of all floors including walls and columns.
Calculate the area of each floor by multiplying length and width.
Include the area of walls and columns in the calculation.
Add up the areas of all floors to get the built-up area.
For example, if a building has 3 floors with dimensions 10x10m each, the built-up area would be 300 square meters.
The slump required for pump concrete typically ranges from 4 to 7 inches.
Slump is a measure of the consistency of concrete, indicating how easily it can be mixed, placed, and compacted.
For pump concrete, a higher slump is usually preferred to ensure it flows easily through the pump system without clogging.
The recommended slump for pump concrete is typically between 4 to 7 inches, but it can vary based on the specific m
The sequence of waterproofing a bathroom involves multiple steps to ensure proper sealing and protection against water damage.
1. Prepare the surface by cleaning and removing any debris or old waterproofing material.
2. Apply a primer to the surface to improve adhesion of the waterproofing membrane.
3. Install the waterproofing membrane, such as a liquid membrane or sheet membrane, according to manufacturer's instructions...
The concrete cube strength after 07 days is typically around 65-75% of the 28 days strength.
Concrete cube strength at 07 days is usually around 65-75% of the 28 days strength
The strength of concrete increases with time as it continues to cure and gain strength
Factors like water-cement ratio, curing conditions, and type of cement used can affect the strength development
I applied via Company Website and was interviewed before Oct 2020. There were 4 interview rounds.
SFD & BMD for a simply supported load
SFD is a diagram that shows the variation of shear force along the length of a beam
BMD is a diagram that shows the variation of bending moment along the length of a beam
For a simply supported load, the SFD will be a straight line with a constant slope
The BMD will be a parabolic curve with the maximum value at the center of the beam
The SFD and BMD can be calculated using equations an
I applied via Naukri.com and was interviewed in May 2024. There were 2 interview rounds.
Under and over reinforcement in beams and columns refers to the amount of reinforcement provided in relation to the required strength of the structure.
Under reinforcement occurs when the amount of reinforcement provided is less than what is required for the structure to carry the design loads.
Over reinforcement occurs when the amount of reinforcement provided is more than what is required for the structure, leading to ...
NDT tests of members are done to ensure structural integrity and safety.
NDT tests are non-destructive tests used to evaluate the properties of a material, component, or system without causing damage.
These tests help in detecting defects such as cracks, voids, and discontinuities that may compromise the structural integrity of the members.
By conducting NDT tests, engineers can ensure the safety and reliability of struct...
I applied via Walk-in and was interviewed before Feb 2022. There were 2 interview rounds.
One way slab is supported on two opposite sides while two way slab is supported on all four sides.
One way slab is designed to carry the load in one direction only
Two way slab is designed to carry the load in both directions
One way slab is economical for small spans and light loads
Two way slab is suitable for larger spans and heavy loads
One way slab requires less reinforcement compared to two way slab
If the ratio of length and width of slab is 2 or more, then it's a two-way slab.
A two-way slab is supported by beams on all four sides.
The ratio of length and width determines the direction of the main reinforcement.
A one-way slab is supported by beams on two opposite sides only.
I applied via Campus Placement and was interviewed in Sep 2022. There were 3 interview rounds.
I am a Site Engineer with expertise in cement density, brick size, and concrete grade.
I have extensive knowledge of different types of cement and their densities.
I am familiar with various brick sizes and their applications in construction.
I have experience working with different concrete grades for different structural requirements.
I can provide recommendations on the appropriate cement density, brick size, and concre
I am a dedicated and experienced Site Engineer with a strong background in construction and project management.
Bachelor's degree in Civil Engineering
5 years of experience in managing construction projects
Proficient in using construction software and tools
Strong problem-solving and decision-making skills
Excellent communication and leadership abilities
Completed successful projects such as building a commercial complex an
My family background is diverse and has influenced my values and work ethic.
My parents are both engineers, which inspired me to pursue a career in engineering.
I come from a close-knit family that values education and hard work.
My grandparents were farmers, teaching me the importance of perseverance and adaptability.
I have a sibling who is a doctor, which has given me insights into the medical field.
My family has always...
I applied via Walk-in and was interviewed before Aug 2022. There were 4 interview rounds.
About numerical, blood relation etc.,
I applied via Walk-in and was interviewed in Jan 2024. There was 1 interview round.
I applied via Walk-in and was interviewed before Sep 2023. There were 2 interview rounds.
Cement is a binding material used in construction. Types include Portland cement, white cement, and rapid-hardening cement.
Cement is a fine powder made from limestone, clay, and other minerals.
Portland cement is the most common type used in construction.
White cement is used for architectural purposes to achieve a clean, bright finish.
Rapid-hardening cement sets quickly and is ideal for projects with tight deadlines.
Lapping of steel is the process of overlapping two pieces of steel to create a continuous connection.
Lapping is commonly used in construction to join reinforcing steel bars together.
The overlapping length is typically specified in construction drawings or codes.
Proper lapping ensures structural integrity and strength of the steel connection.
I applied via Walk-in and was interviewed in Jun 2024. There were 2 interview rounds.
Round was quite easy, for mechanical they had turbo machinery and heat transfer questions and basic SOM,TOM,MD,MF
Lifts work on the principle of pulleys and counterweights while ACs work on the principle of refrigeration.
Lifts use a motor to move a counterweight that balances the weight of the lift car and its occupants.
ACs use a compressor to compress and expand refrigerant gas to absorb and release heat.
Types of ACs include window ACs, split ACs, central ACs, and portable ACs.
Window ACs are mounted on windows and cool a single r...
based on 1 interview
Interview experience
based on 1 review
Rating in categories
Assistant Manager
31
salaries
| ₹0 L/yr - ₹0 L/yr |
Junior Engineer
24
salaries
| ₹0 L/yr - ₹0 L/yr |
Manager
15
salaries
| ₹0 L/yr - ₹0 L/yr |
Senior Manager
12
salaries
| ₹0 L/yr - ₹0 L/yr |
Junior Engineer Civil
11
salaries
| ₹0 L/yr - ₹0 L/yr |
Prestige Group
Sobha
DLF
Godrej Properties