Upload Button Icon Add office photos
Premium Employer

i

This company page is being actively managed by Forbes Marshall Team. If you also belong to the team, you can get access from here

Forbes Marshall Verified Tick

Compare button icon Compare button icon Compare

Filter interviews by

Forbes Marshall Graduate Engineer Trainee (Get) Interview Questions and Answers

Updated 12 Mar 2024

Forbes Marshall Graduate Engineer Trainee (Get) Interview Experiences

3 interviews found

Interview experience
3
Average
Difficulty level
Moderate
Process Duration
More than 8 weeks
Result
Not Selected

I applied via Campus Placement and was interviewed in Sep 2023. There were 3 interview rounds.

Round 1 - Aptitude Test 

Easy to solve, Basic practice in need.

Round 2 - Technical 

(1 Question)

  • Q1. 1. Pumps and its working 2. Boilers 3. Heat Exchangers
Round 3 - HR 

(2 Questions)

  • Q1. 1. What do you know about the company?
  • Q2. 2. What are the roles offered by forbes marshall..?

I applied via Campus Placement and was interviewed in Oct 2022. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(2 Questions)

  • Q1. Tell me about Diesel cycle
  • Ans. 

    Diesel cycle is a thermodynamic cycle used in diesel engines to convert heat into work.

    • Diesel cycle is a compression ignition cycle.

    • It consists of four processes - intake, compression, combustion, and exhaust.

    • Air is compressed in the cylinder, and fuel is injected at the end of compression stroke.

    • The fuel ignites due to high temperature and pressure, and the resulting expansion pushes the piston down.

    • The exhaust gases ...

  • Answered by AI
  • Q2. Poisson's ratio of Aluminium
  • Ans. 

    Poisson's ratio of Aluminium is 0.33

    • Poisson's ratio is the ratio of lateral strain to longitudinal strain

    • It is a material property that describes the deformation behavior of a material

    • Aluminium has a Poisson's ratio of 0.33

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Be confident and have a good grip over the basics of thermodynamics.

Graduate Engineer Trainee (Get) Interview Questions Asked at Other Companies

asked in JBM Group
Q1. Q: 1 What is IC engine? What is the types of IC engine? Q:2 Diffe ... read more
Q2. How to check for continuity for a wire inside a wall if the start ... read more
Q3. What will be the cost of painting the wall behind me?
Q4. What happen when there is large air void in concrete?
Q5. What are the different types of concrete?

I applied via Approached by Company and was interviewed in Feb 2022. There was 1 interview round.

Round 1 - One-on-one 

(2 Questions)

  • Q1. Are ready to travel?
  • Q2. Why you want to do this job

Interview Preparation Tips

Interview preparation tips for other job seekers - Very bad experience first HR call me share details about job and after my confirmation she schedule interview after 2 3 days with head of department. On the day of interview before 10 min HR called me and said the we hire for another department not for which i told you before so in interview give answer related to that. I prepare for 3 days with full dedication and in interview they ask some basic question like are you able to travel ? why you want to do this job? etc. after that i didnt get any call from them.

Interview questions from similar companies

Interview Preparation Tips

Round: Resume Shortlist
Experience: It took me a lot of time for me to make my first resume. Although i have made a lot of changes in it and it is totally different from my first one. I keep on updating my resume and still i think its not what i want.
Tips: Make your first resume by yourself without taking any help from others, review it and look for adds or subtracts.
Then look for some professional resume online and take help from your elders who are already having a job.

Round: Test
Experience: It's always mine bitter one, as i am not so good in technical, only i used to deal with is quantitative portion.
Tips: You should be well prepared. [not like me :)]

Round: Group Discussion
Experience: I really don't care about the topic, as i always don't know any shit about the topic, but don't know how i have always cleared GD round.
Tips: One thing if don't know anything about the topic so don't start, give chance to someone else and after having some idea about the topic be speaker. Always look into the eyes of the other candidates while addressing your points. Just be calm n cool.

College Name: NIT Agartala

Interview Preparation Tips

Round: Group Discussion
Experience: HR'S MAINLY FOCUSES ON YOUR SPEAKING SKILLS AND YOUR ABILITY TO KEEP THE GROUP GOING IN RIGHT DIRECTION.ITS IMPORTANT TO KEEP YOUR POINTS CLEAR AND PRECISE.THERE IS NO NEED TO GET HYPER IF NO ONE IS AGREEING WITH YOU .STAY CALM !! TRY TO ASK THE PASSIVE MEMBERS OF THE GROUP TO SPEAK IN BETWEEN THIS WILL REFLECT THAT YOU HAVE LEADER LIKE QUALITIES .I WAS IN SUPPORT OF THE TOPIC AND I STARTED MY DISCUSSION FROM THE INDIGENOUS PRACTICES LIKE AYURVEDA,YOGA ,ZERO .THEN I FOCUSED ON THE NEWER INVENTIONS LIKE NANO, MARS ORBITER MISSION ETC
Tips: USE VERY SIMPLE LANGUAGE TO EXPRESS YOUR VIEWS

TRY TO START THE DISCUSSION

TRY TO ASK THE PASSIVE MEMBERS TO SPEAK DURING THE MIDDLE OF THE DISCUSSION

BE YOURSELF

DON'T EXAGGERATE YOUR VIEWS

NEVER LET THE GROUP DEVIATE FROM THE TOPIC

College Name: NIT AGARTALA

Interview Questionnaire 

2 Questions

  • Q1. Give name of first 20 elements of periodic table
  • Ans. 

    The first 20 elements of the periodic table are essential building blocks of matter.

    • The first element is Hydrogen (H)

    • The second element is Helium (He)

    • The third element is Lithium (Li)

    • The fourth element is Beryllium (Be)

    • The fifth element is Boron (B)

    • The sixth element is Carbon (C)

    • The seventh element is Nitrogen (N)

    • The eighth element is Oxygen (O)

    • The ninth element is Fluorine (F)

    • The tenth element is Neon (Ne)

    • The eleventh...

  • Answered by AI
  • Q2. What is laminar flow and tubulent flow?
  • Ans. 

    Laminar flow is a smooth, orderly flow of fluid while turbulent flow is a chaotic, irregular flow.

    • Laminar flow occurs at low velocities and is characterized by layers of fluid moving parallel to each other.

    • Turbulent flow occurs at high velocities and is characterized by eddies and swirls in the fluid.

    • Laminar flow is commonly observed in blood vessels while turbulent flow is observed in rivers and oceans.

    • The transition ...

  • Answered by AI

Interview Preparation Tips

Round: Test
Experience: Good
Tips: Focus on basic
Duration: 3 hrs minutes
Total Questions: 150

Round: Group Discussion
Experience: Good
Tips: Express your Idea clearly.
Don,t go with the mass flow or change your opnion during discussion.
Give chance to other people to express their idea.
Adhere to your beliveing and strengthen your points with solid proof or example.

Round: Technical Interview
Experience: Good
Tips: Keep calm and don't get nervous.
Don't get worried if you do not know some answer.
If you don't to answer say politely that you don't know answer rather than giving wrong answer.

Skills: Technical knowledge, Problem solving capability, Communication skills, Under stress workability
College Name: SVNIT
Motivation: L&T is one of the leading company in the field of the heavy metal engineering.
It can give you good knowledge of working in the heavy metal industries.

Interview Questionnaire 

1 Question

  • Q1. Tell me about yourself?

Interview Preparation Tips

Round: Test
Experience: Most of the questions are not so difficult.
Duration: 60 minutes

Round: Technical Interview
Experience: As Iam a Electrical student, I was asked questions on Transformers(like transformer losses), Power systems, Electrical machines(two machine ratings were given and Iam asked to find which is more cost efficient), Electronics(like Adder, Subtractor, Truth Tables etc.,) and on my elective i.e New Enterprise Creation and Management(NECM).

Skill Tips: Concentrate on learning concepts and applying them for practical purposes.
College Name: NIT WARANGAL

Interview Preparation Tips

Round: Test
Experience: Questions were general aptitude ranging from analytical reasoning,verbal,quant,reading comprehension and also non verbal total time allotted was 75 minutes and there was sectional cut off for each of the sections.
Duration: 75 minutes

Round: Technical Interview
Experience: Interview was the most important pat of the selection process questions were purely technical .they asked about my project paper presented and training and gave some practical problems interview was for 45-50 minutes.
Tips: Required a good understanding of the core subjects like manufacturing and machine tools.

Round: HR Interview
Experience: HR was apart of the technical assessment itself they inquired about my background and my interest to join the company.

Skill Tips: In the interview the interviewer seemed to put stress on me in the last to judge my temperament rest was all routine type of procedure they followed. L&T is a company that looks for a candidate good in the core subjects rest things like communication and attitude comes second to them so be prepared for the interview and solve some basic aptitude questions before sitting for the company.
College Name: NIT WARANGAL

Interview Questionnaire 

7 Questions

  • Q1. Which are your favourite subjects and topics?
  • Ans. 

    My favorite subjects are Mathematics, Physics, and Computer Science.

    • I enjoy solving complex mathematical problems and equations.

    • I find the laws of physics fascinating and enjoy learning about them.

    • I am interested in programming and enjoy learning new coding languages and techniques.

  • Answered by AI
  • Q2. Which are common IS codes used and what are their revisions?
  • Ans. 

    Common IS codes and their revisions used in engineering

    • IS 456:2000 - Code of practice for plain and reinforced concrete

    • IS 800:2007 - Code of practice for general construction in steel

    • IS 1893:2016 - Criteria for earthquake resistant design of structures

    • IS 1343:2012 - Code of practice for prestressed concrete

    • IS 383:2016 - Coarse and fine aggregates for concrete

    • IS 10262:2019 - Concrete mix proportioning guidelines

    • IS 1200:...

  • Answered by AI
  • Q3. Draw SFD of continuous beam
  • Ans. 

    Draw SFD of continuous beam

    • Identify the support reactions

    • Cut the beam at a section and draw the free body diagram

    • Determine the shear force at the section

    • Plot the shear force diagram

    • Determine the bending moment at the section

    • Plot the bending moment diagram

    • Repeat for all sections of the beam

  • Answered by AI
  • Q4. What's your major project topic? Explain
  • Ans. 

    My major project topic was on developing a smart irrigation system using IoT.

    • The project aimed to optimize water usage in agriculture by using sensors and IoT technology.

    • The system was designed to collect data on soil moisture, temperature, and humidity to determine the water requirements of crops.

    • Based on the data collected, the system would automatically control the irrigation process, reducing water wastage and incr...

  • Answered by AI
  • Q5. Why did you take up civil engineering?
  • Ans. 

    I took up civil engineering because of my interest in designing and constructing buildings and infrastructure.

    • I have always been fascinated by the process of building and creating things

    • I enjoy problem-solving and finding solutions to complex challenges

    • Civil engineering offers a wide range of career opportunities in various sectors such as construction, transportation, and environmental engineering

    • I believe that civil ...

  • Answered by AI
  • Q6. Why are you interested in L&T?
  • Ans. 

    I am interested in L&T because of its reputation as a leading engineering and construction company.

    • L&T has a strong presence in various sectors such as infrastructure, power, and defense.

    • The company has a reputation for delivering high-quality projects on time and within budget.

    • L&T offers excellent opportunities for career growth and development.

    • I am impressed by L&T's commitment to sustainability and social responsibi...

  • Answered by AI
  • Q7. Are you ready to work at anyplace in India?
  • Ans. 

    Yes, I am willing to work at anyplace in India.

    • I am open to exploring new places and cultures.

    • I am adaptable and can adjust to new environments.

    • I am excited to work with diverse teams and learn from them.

    • I am committed to my career and willing to go the extra mile.

    • I understand that working in different locations can broaden my experience and skills.

  • Answered by AI

Interview Preparation Tips

Round: Test
Experience: Good
Duration: 90 minutes

Round: Technical Interview
Experience: Not that great. Nervous as this was my first interview.
Tips: Just be confident.

Round: HR Interview
Experience: Again nervous but not that bad.
Tips: Speak frankly.

Skills: Technical Understanding, Speed, Confi
College Name: NIT Surathkal

Interview Questionnaire 

1 Question

  • Q1. Tell me about yourself

Interview Preparation Tips

Round: Test
Experience: Questions were from number system, probablity , common analytical reasoning questions, some questions from vocabulary.
Duration: 150 minutes

Round: Technical Interview
Experience: There was only one round of PI which was completely technical. the following were some of the questions :
1. questions from stress strain diagram of steels 
2. FeFe3C diagram 
3. fatigue and creep 
4. TTT diagram make sure you have an answer to your favorite subject.

Round: HR Interview
Experience: There was nothing like HR other than the basic question.

General Tips: LnT is the first company that visits NITW campus.there are quite a number of applicants, to crack this company you have to brush up your technical fundamentals.
Skill Tips: It was an hour of full technical grind.
College Name: NIT WARANGAL

Forbes Marshall Interview FAQs

How many rounds are there in Forbes Marshall Graduate Engineer Trainee (Get) interview?
Forbes Marshall interview process usually has 2 rounds. The most common rounds in the Forbes Marshall interview process are Technical, One-on-one Round and Resume Shortlist.
How to prepare for Forbes Marshall Graduate Engineer Trainee (Get) interview?
Go through your CV in detail and study all the technologies mentioned in your CV. Prepare at least two technologies or languages in depth if you are appearing for a technical interview at Forbes Marshall. The most common topics and skills that interviewers at Forbes Marshall expect are Apache, Centos, Communication Skills, Interpersonal Skills and LAMP.
What are the top questions asked in Forbes Marshall Graduate Engineer Trainee (Get) interview?

Some of the top questions asked at the Forbes Marshall Graduate Engineer Trainee (Get) interview -

  1. Tell me about Diesel cy...read more
  2. Poisson's ratio of Alumin...read more
  3. 1. Pumps and its working 2. Boilers 3. Heat Exchang...read more

Tell us how to improve this page.

Forbes Marshall Graduate Engineer Trainee (Get) Interview Process

based on 1 interview

Interview experience

3
  
Average
View more
Forbes Marshall Graduate Engineer Trainee (Get) Salary
based on 26 salaries
₹2.2 L/yr - ₹7.8 L/yr
70% more than the average Graduate Engineer Trainee (Get) Salary in India
View more details

Forbes Marshall Graduate Engineer Trainee (Get) Reviews and Ratings

based on 3 reviews

4.0/5

Rating in categories

4.8

Skill development

4.7

Work-life balance

4.0

Salary

4.7

Job security

4.9

Company culture

3.9

Promotions

4.8

Work satisfaction

Explore 3 Reviews and Ratings
Quality Executive
78 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Project Engineer
66 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Executive Engineer
52 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Product Manager
47 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Team Lead
44 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Explore more salaries
Compare Forbes Marshall with

Thermax Limited

4.1
Compare

Kirloskar Brothers

3.8
Compare

CG Power and Industrial Solutions

3.9
Compare

BHEL

4.1
Compare
Did you find this page helpful?
Yes No
write
Share an Interview