Upload Button Icon Add office photos

Filter interviews by

Fermator Material Engineer Interview Questions and Answers

Updated 20 Jun 2024

Fermator Material Engineer Interview Experiences

1 interview found

Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Walk-in and was interviewed before Jun 2023. There were 3 interview rounds.

Round 1 - Technical 

(2 Questions)

  • Q1. Basic engineering questions
  • Q2. Test our spontaneous
Round 2 - HR 

(2 Questions)

  • Q1. Personality test
  • Q2. Salary discussion
Round 3 - One-on-one 

(1 Question)

  • Q1. Material resources planner basic roles and respnsibility

Interview questions from similar companies

Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Referral and was interviewed before Mar 2023. There was 1 interview round.

Round 1 - Technical 

(3 Questions)

  • Q1. Mivan formwork process?
  • Ans. 

    Mivan formwork is a construction technique that uses aluminum formwork system for casting concrete structures.

    • Mivan formwork involves setting up aluminum formwork panels, fixing reinforcement bars, pouring concrete, and removing the formwork after the concrete has set.

    • It is a fast and efficient construction method commonly used for high-rise buildings and large residential projects.

    • The system allows for smooth finishes...

  • Answered by AI
  • Q2. Finishing process
  • Q3. Reinforcement related

I appeared for an interview before Sep 2016.

Interview Preparation Tips

Round: Group Discussion
Experience: held technical interview
Tips: express technical expertise
Duration: 2 hours

Round: Group Discussion
Experience: visa transfer discussion
Duration: 1 hour

I applied via Naukri.com and was interviewed before May 2017. There was 1 interview round.

Interview Questionnaire 

1 Question

  • Q1. What is the density of soil in embankment layer.
  • Ans. 

    The density of soil in the embankment layer varies depending on the type of soil and compaction methods used.

    • The density of soil in the embankment layer is typically measured in terms of dry density or wet density.

    • Dry density refers to the mass of solid soil particles per unit volume of soil, while wet density includes the mass of water as well.

    • The density of soil in the embankment layer is influenced by factors such a...

  • Answered by AI

Interview Preparation Tips

General Tips: This interview was a technical one.The interview eanted to test both my knowledge and communications skills.Most of questions are related with Transportation.
Skills: Technical Knowledge(ML, Technical Knowledge(ML
Duration: <1 week

I appeared for an interview before Jul 2016.

Interview Questionnaire 

1 Question

  • Q1. Temperature of Prime coat, Tack Coat, Penetration Grade, various tests on Bitumen, asphalt works, Rolling pattern, Rolling temperature as well as Asphalt Laying temperature, densities of various compacted ...

Interview Preparation Tips

Skills: Knowledge Of Construction Practices, Construction Technology
Round 1 - Technical 

(1 Question)

  • Q1. Introduction,goals,Explain your final year project

Interview Preparation Tips

Interview preparation tips for other job seekers - Do preperation on communication skill development,focus on technical area,have a goal
Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Do not use an unprofessional email address such as cool_boy@email.com. It shows a lack of professionalism by the candidate.
View all tips
Round 2 - Technical 

(3 Questions)

  • Q1. What is the Density of cement?
  • Ans. 

    The density of cement is around 1440 kg/m³.

    • The density of cement varies depending on the type of cement.

    • The density of Portland cement is around 1440 kg/m³.

    • The density of lightweight cement is around 1000 kg/m³.

    • The density of high-density cement is around 3000 kg/m³.

  • Answered by AI
  • Q2. What is clear cover in column?
  • Ans. 

    Clear cover in column refers to the distance between the surface of the reinforcement and the outer surface of the concrete.

    • Clear cover is important to protect the reinforcement from corrosion and to ensure proper bonding between the reinforcement and concrete.

    • The required clear cover for columns depends on factors such as the type of structure, exposure conditions, and size of the reinforcement.

    • For example, in a coast...

  • Answered by AI
  • Q3. What is bending moment formula?
  • Ans. 

    Bending moment formula calculates the internal bending moment in a beam or structure.

    • Bending moment formula is M = F * d

    • M is the bending moment, F is the force applied, and d is the distance from the force to the point of interest

    • Bending moment can be positive or negative depending on the direction of the force and the orientation of the beam

    • Bending moment is an important factor in designing and analyzing structures

  • Answered by AI

Interview Preparation Tips

Topics to prepare for Construction Group Site Engineer interview:
  • Bis 456
Interview preparation tips for other job seekers - Conduct interview on phone by using video call so that u can find good engineer easily.

Interview Questionnaire 

5 Questions

  • Q1. What the thickness of compreg ply and it's size
  • Ans. 

    The thickness of compreg ply varies depending on its intended use and application. Its size can also vary depending on the manufacturer and customer requirements.

    • The thickness of compreg ply can range from 3mm to 25mm or more

    • The size of compreg ply can vary from 4ft x 8ft to 5ft x 10ft or more

    • The thickness and size of compreg ply can be customized based on the specific requirements of the project

    • Compreg ply is commonly...

  • Answered by AI
  • Q2. Maximum reapetation of ply shuttering
  • Ans. 

    The maximum repetition of ply shuttering depends on various factors such as quality of ply, weather conditions, and type of concrete.

    • The maximum repetition of ply shuttering can range from 5 to 20 times depending on the above factors.

    • If the quality of ply is good and weather conditions are favorable, the ply shuttering can be reused more number of times.

    • However, if the concrete mix is harsh or the weather conditions ar...

  • Answered by AI
  • Q3. Consumption of shuttering oil per ltr how much area covered
  • Ans. 

    The consumption of shuttering oil per liter depends on the area covered.

    • The consumption of shuttering oil per liter can vary depending on factors such as the type of shuttering material, surface texture, and weather conditions.

    • On average, 1 liter of shuttering oil can cover approximately 10-15 square meters of surface area.

    • However, this can vary significantly based on the absorbency of the surface and the thickness of ...

  • Answered by AI
  • Q4. How much elongation % of fe550 steel
  • Ans. 

    The elongation % of fe550 steel varies depending on the specific grade and manufacturing process.

    • The elongation % of fe550 steel can range from 14% to 20%.

    • It is important to refer to the specifications provided by the manufacturer for accurate information.

    • The elongation % indicates the ability of the steel to deform before breaking under tension.

    • Fe550 steel is commonly used in construction and reinforcement application

  • Answered by AI
  • Q5. What the mean of rolling margin of the steel
  • Ans. 

    Rolling margin of steel is the difference between the target thickness and the actual thickness after rolling.

    • Rolling margin is a measure of the accuracy of the rolling process.

    • It is calculated by subtracting the actual thickness of the steel after rolling from the target thickness.

    • A positive rolling margin means the steel is thicker than intended, while a negative rolling margin means it is thinner.

    • Rolling margin is i...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Be confident and deeply knowledge of each material and it's properties
Interview experience
3
Average
Difficulty level
Moderate
Process Duration
2-4 weeks
Result
Selected Selected

I applied via Walk-in and was interviewed in Jul 2024. There was 1 interview round.

Round 1 - HR 

(3 Questions)

  • Q1. What is penitration test
  • Ans. 

    Penetration test is a method of evaluating the security of a computer system or network by simulating an attack from a malicious source.

    • Penetration test involves identifying vulnerabilities in a system or network.

    • It includes attempting to exploit these vulnerabilities to determine the potential impact of a real attack.

    • The goal of a penetration test is to strengthen the security defenses of the system or network.

    • Common ...

  • Answered by AI
  • Q2. What is water proofing
  • Ans. 

    Waterproofing is a process of making a structure or material resistant to the penetration of water.

    • Waterproofing involves applying materials or coatings to prevent water from seeping through surfaces.

    • It is commonly used in construction to protect buildings from water damage.

    • Examples of waterproofing materials include bituminous coatings, cementitious waterproofing, and liquid membrane systems.

  • Answered by AI
  • Q3. Types of foundation
  • Ans. 

    Types of foundation include shallow, deep, and pile foundations.

    • Shallow foundations are used when the soil is strong enough to support the structure's weight, such as spread footings and mat foundations.

    • Deep foundations are used when the soil is weak and unable to support the structure's weight, such as pile foundations and drilled piers.

    • Pile foundations are deep foundations that consist of long, slender columns driven...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Good
Interview experience
5
Excellent
Difficulty level
Hard
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Company Website and was interviewed in Mar 2024. There was 1 interview round.

Round 1 - Technical 

(3 Questions)

  • Q1. What is the mix design how we do the mix design of concrete
  • Ans. 

    Mix design is the process of determining the proportions of cement, water, aggregates, and admixtures in concrete to achieve desired properties.

    • Determine the required strength and durability of the concrete

    • Select suitable materials such as cement, aggregates, water, and admixtures

    • Calculate the proportions of each material based on desired properties and specifications

    • Perform trial mixes to test the properties of the co...

  • Answered by AI
  • Q2. All material testings and procedures
  • Q3. Finishing activities

Interview Preparation Tips

Interview preparation tips for other job seekers - Good job platform we get good knowledge of all construction activities.

Fermator Interview FAQs

How many rounds are there in Fermator Material Engineer interview?
Fermator interview process usually has 3 rounds. The most common rounds in the Fermator interview process are Technical, HR and One-on-one Round.
What are the top questions asked in Fermator Material Engineer interview?

Some of the top questions asked at the Fermator Material Engineer interview -

  1. Material resources planner basic roles and respnsibil...read more
  2. Basic engineering questi...read more
  3. Test our spontane...read more

Tell us how to improve this page.

Fermator Material Engineer Interview Process

based on 1 interview

Interview experience

5
  
Excellent
View more
Assistant Manager
4 salaries
unlock blur

₹12 L/yr - ₹19 L/yr

Electronics Engineer
4 salaries
unlock blur

₹2.3 L/yr - ₹3.4 L/yr

Senior IT Executive
4 salaries
unlock blur

₹7 L/yr - ₹12.7 L/yr

Purchase Executive
3 salaries
unlock blur

₹4.3 L/yr - ₹5.1 L/yr

Production Planning Control Engineer
3 salaries
unlock blur

₹2.5 L/yr - ₹7.9 L/yr

Explore more salaries
Compare Fermator with

Lea Associates South Asia

4.3
Compare

McNally Bharat Engineering

4.0
Compare

R.V.R. PROJECTS

4.0
Compare

ABCI Infrastructures

3.4
Compare
Did you find this page helpful?
Yes No
write
Share an Interview