Upload Button Icon Add office photos
Engaged Employer

i

This company page is being actively managed by Falcon Autotech Team. If you also belong to the team, you can get access from here

Falcon Autotech Verified Tick

Compare button icon Compare button icon Compare
4.1

based on 313 Reviews

Filter interviews by

Falcon Autotech R&D Engineer Interview Questions and Answers

Updated 19 Dec 2023

Falcon Autotech R&D Engineer Interview Experiences

1 interview found

R&D Engineer Interview Questions & Answers

user image Anonymous

posted on 19 Dec 2023

Interview experience
5
Excellent
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Naukri.com and was interviewed in Jun 2023. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(5 Questions)

  • Q1. How much current takes 1mm2 wire??
  • Ans. 

    The amount of current that a 1mm2 wire can carry depends on various factors.

    • The current carrying capacity of a wire depends on its material, temperature, and insulation.

    • Copper wires typically have a higher current carrying capacity compared to aluminum wires.

    • The current rating of a wire is usually specified by its manufacturer.

    • The current carrying capacity can be affected by factors such as wire length and ambient temp...

  • Answered by AI
  • Q2. What is resistivity????
  • Ans. 

    Resistivity is a measure of a material's ability to resist the flow of electric current.

    • Resistivity is the inverse of conductivity.

    • It is a property of a material that determines how strongly it resists the flow of electric current.

    • Resistivity is measured in ohm-meters (Ω·m).

    • Materials with high resistivity, such as rubber or glass, are insulators.

    • Materials with low resistivity, such as copper or silver, are conductors.

  • Answered by AI
  • Q3. Drive Parameters???????
  • Q4. Why do you want to join?????
  • Q5. Panel wiring and testing

Interview Preparation Tips

Interview preparation tips for other job seekers - What you have have in CV they will ask you that only

Interview questions from similar companies

Interview experience
4
Good
Difficulty level
Hard
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Recruitment Consulltant and was interviewed in Feb 2023. There were 4 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(2 Questions)

  • Q1. Resume based interview questions
  • Q2. Earlier experience work related questions
Round 3 - Technical 

(2 Questions)

  • Q1. Resume oriented interview questions
  • Q2. Earlier experience interview questions
Round 4 - Behavioral 

(2 Questions)

  • Q1. HR questions based on resume
  • Q2. Situational leadership questions
Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-
Round 1 - One-on-one 

(2 Questions)

  • Q1. What is the current unit?
  • Ans. 

    The current unit refers to the standard unit of measurement being used in a particular context.

    • The current unit can vary depending on the field or industry, such as inches in construction or Celsius in weather forecasting.

    • It is important to clarify the current unit to ensure accurate communication and data analysis.

    • Examples of current units include meters for length, kilograms for weight, and seconds for time.

  • Answered by AI
  • Q2. What is the resistance unit?
  • Ans. 

    The resistance unit is the ohm (Ω), which measures the opposition to the flow of electric current.

    • The resistance unit is measured in ohms (Ω)

    • It represents the opposition to the flow of electric current

    • Resistance can be calculated using Ohm's Law: R = V/I, where R is resistance, V is voltage, and I is current

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Group discussion
Interview experience
2
Poor
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(2 Questions)

  • Q1. Motor selection for rotary table
  • Ans. 

    Motor selection for rotary table involves considering torque requirements, speed, size constraints, and control system compatibility.

    • Consider torque requirements for the rotary table based on load and acceleration/deceleration needs

    • Select a motor with appropriate speed capabilities to meet the desired rotation speed

    • Ensure the motor size fits within the constraints of the rotary table design

    • Check compatibility with the ...

  • Answered by AI
  • Q2. Pneumatic cylinder selection
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Naukri.com and was interviewed in Jun 2023. There were 4 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Don’t add your photo or details such as gender, age, and address in your resume. These details do not add any value.
View all tips
Round 2 - Aptitude Test 

Qualitative and quantitative questions

Round 3 - Technical 

(3 Questions)

  • Q1. Based on Experience and technical knowledge.
  • Q2. Any project that has been done by you. What was your role in that project.
  • Q3. Manufacturing process and guidelines
  • Ans. 

    Manufacturing process and guidelines are essential for ensuring quality and efficiency in production.

    • Understanding the specific requirements of the product being manufactured

    • Selecting the appropriate materials and tools for the manufacturing process

    • Following established guidelines and standards to ensure consistency and quality

    • Regularly monitoring and evaluating the manufacturing process for improvements

    • Training and ed...

  • Answered by AI
Round 4 - HR 

(1 Question)

  • Q1. Basic questions. Reason for leaving previous job.

Interview Preparation Tips

Interview preparation tips for other job seekers - Be justifiable with right documents.
Interview experience
3
Average
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Recruitment Consulltant and was interviewed in May 2023. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Properly align and format text in your resume. A recruiter will have to spend more time reading poorly aligned text, leading to high chances of rejection.
View all tips
Round 2 - Technical 

(2 Questions)

  • Q1. After shortlisting of resume, there was a technical interview -1 followed by an interview with manager for technical analysis Next was hr round.
  • Q2. Design related questions on som, mechanical designs and the application of these concepts in your previous experience
Round 3 - Case Study 

Application of technical knowledge in your previous experience

Interview Preparation Tips

Interview preparation tips for other job seekers - Learn the fundamentals and be confident on your projects

Ask for company policy before joining, to know whether it aligns with your interest
Interview experience
3
Average
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Not Selected

I applied via Naukri.com and was interviewed in Sep 2023. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Double-check your resume for any spelling mistakes. The recruiter may consider spelling mistakes as careless behavior or poor communication skills.
View all tips
Round 2 - Technical 

(2 Questions)

  • Q1. As per work experience in previous company
  • Q2. Technical knowledge

Interview Preparation Tips

Topics to prepare for Janatics India Design Engineer interview:
  • Design
Interview preparation tips for other job seekers - Keep biodata updated as per experience
Interview experience
3
Average
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Recruitment Consulltant and was interviewed before Oct 2022. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Do not use an unprofessional email address such as cool_boy@email.com. It shows a lack of professionalism by the candidate.
View all tips
Round 2 - Technical 

(3 Questions)

  • Q1. Manufacturing knowledge read from the drawing
  • Q2. Design and engineering knowledge
  • Q3. Sheet metal work experience
  • Ans. 

    I have 3 years of experience in sheet metal work, including designing and fabricating components for various projects.

    • Experience in designing sheet metal components using CAD software

    • Knowledge of different types of sheet metal materials and their properties

    • Hands-on experience in fabricating sheet metal parts using various tools and techniques

    • Ability to interpret engineering drawings and specifications accurately

    • Experie...

  • Answered by AI
Round 3 - HR 

(3 Questions)

  • Q1. Previous employment details
  • Q2. Salary discussion
  • Q3. Company benefits
Interview experience
1
Bad
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
No response

I applied via Approached by Company and was interviewed in Nov 2022. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Be truthful in your resume. It is very easy to catch false or lies during the interview by asking basic questions.
View all tips
Round 2 - Technical 

(2 Questions)

  • Q1. Basic DOL diagram and drawing DOL Circuit
  • Q2. How to select plc and cards
  • Ans. 

    PLC and card selection depends on the application requirements and budget.

    • Identify the required inputs and outputs

    • Consider the communication protocols needed

    • Evaluate the processing power and memory requirements

    • Determine the budget and cost of ownership

    • Research and compare different brands and models

    • Consider the availability of technical support and spare parts

    • Ensure compatibility with existing systems

    • Consider the envir

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - The interview was okay, but the people are just not impressed even with all the answer are given, selection is purely based on cast and referal, they just wasted my time and thier time. They need condidate which expect low salary but have vast knowledge. Not recomended. very bad management.

Skills evaluated in this interview

Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Approached by Company and was interviewed before Mar 2023. There was 1 interview round.

Round 1 - One-on-one 

(2 Questions)

  • Q1. Different between DOL & Star-Delta Starter?
  • Ans. 

    DOL starter directly connects the motor to the power supply, while Star-Delta starter initially connects the motor in star configuration before switching to delta configuration.

    • DOL starter provides full voltage to the motor from the start, causing high starting current and torque.

    • Star-Delta starter reduces the starting current and torque by initially connecting the motor in star configuration, then switching to delta c...

  • Answered by AI
  • Q2. What is VFD & How it works?
  • Ans. 

    VFD stands for Variable Frequency Drive. It is a type of motor controller that drives an electric motor by varying the frequency and voltage supplied to the motor.

    • VFDs are used to control the speed and torque of AC motors in various applications.

    • They work by converting fixed frequency and voltage AC power to variable frequency and voltage output.

    • VFDs can improve energy efficiency, reduce wear and tear on motors, and pr...

  • Answered by AI

Interview Preparation Tips

Topics to prepare for Cotmac Electronics Electrical Design Engineer interview:
  • LT Panels
Interview preparation tips for other job seekers - Be Brave to Answer

Falcon Autotech Interview FAQs

How many rounds are there in Falcon Autotech R&D Engineer interview?
Falcon Autotech interview process usually has 2 rounds. The most common rounds in the Falcon Autotech interview process are Resume Shortlist and Technical.
How to prepare for Falcon Autotech R&D Engineer interview?
Go through your CV in detail and study all the technologies mentioned in your CV. Prepare at least two technologies or languages in depth if you are appearing for a technical interview at Falcon Autotech. The most common topics and skills that interviewers at Falcon Autotech expect are Automation, New Product Design, Actuators, Conveyors and Design.
What are the top questions asked in Falcon Autotech R&D Engineer interview?

Some of the top questions asked at the Falcon Autotech R&D Engineer interview -

  1. How much current takes 1mm2 wir...read more
  2. What is resistivity?...read more
  3. Panel wiring and test...read more

Tell us how to improve this page.

People are getting interviews through

based on 1 Falcon Autotech interview
Job Portal
100%
Low Confidence
?
Low Confidence means the data is based on a small number of responses received from the candidates.

Interview Questions from Similar Companies

ABB Interview Questions
4.1
 • 225 Interviews
Wipro PARI Interview Questions
3.5
 • 38 Interviews
Grey Orange Interview Questions
3.2
 • 37 Interviews
J K Fenner Interview Questions
3.9
 • 26 Interviews
View all
Falcon Autotech R&D Engineer Salary
based on 7 salaries
₹4 L/yr - ₹14.5 L/yr
12% less than the average R&D Engineer Salary in India
View more details
Engineer
88 salaries
unlock blur

₹2.7 L/yr - ₹8.7 L/yr

Senior Engineer
84 salaries
unlock blur

₹4.3 L/yr - ₹11.8 L/yr

Assistant Manager
81 salaries
unlock blur

₹5.2 L/yr - ₹15.4 L/yr

Electrical Engineer
52 salaries
unlock blur

₹3 L/yr - ₹6 L/yr

Project Engineer
47 salaries
unlock blur

₹4 L/yr - ₹7.7 L/yr

Explore more salaries
Compare Falcon Autotech with

Grey Orange

3.2
Compare

Addverb Technologies

3.9
Compare

Daifuku India

4.1
Compare

Tata Advanced Systems

3.8
Compare

Calculate your in-hand salary

Confused about how your in-hand salary is calculated? Enter your annual salary (CTC) and get your in-hand salary
Did you find this page helpful?
Yes No
write
Share an Interview