Add office photos
Filter interviews by
Eywa Health Infra Civil Billing Engineer Interview Questions, Process, and Tips
Eywa Health Infra Civil Billing Engineer Interview Experiences
1 interview found
Anonymous
Selected
I applied via Indeed and was interviewed in Jul 2023. There were 2 interview rounds.
(5 Questions)
- Q1. What is design mix and discribe?
- Ans.
Design mix is a specific combination of materials to achieve the desired properties in a concrete mix.
Design mix is a proportionate mixture of cement, sand, aggregates, and water to achieve the desired strength and workability of concrete.
It is designed based on the specific requirements of a project, such as strength, durability, and workability.
Design mix is determined through laboratory testing and calculations to e...
- Q2. What is the slump cone test?
- Ans.
The slump cone test is a method used to measure the consistency of fresh concrete.
It involves filling a slump cone with freshly mixed concrete, then lifting the cone and measuring how much the concrete slumps or settles.
The amount of slump indicates the workability of the concrete - a higher slump means the concrete is more workable.
The test helps ensure that the concrete mix has the right amount of water and is suitab...
- Q3. Type of the cement and discribe?
- Ans.
There are different types of cement used in construction, each with specific properties and applications.
There are various types of cement such as Ordinary Portland Cement (OPC), Portland Pozzolana Cement (PPC), Rapid Hardening Cement, etc.
OPC is commonly used for general construction purposes, while PPC is known for its durability and resistance to chemicals.
Rapid Hardening Cement is used in projects where quick setti...
- Q4. What is M20 mix design ratio?
- Ans.
M20 mix design ratio is a commonly used concrete mix design with a ratio of 1:1.5:3 (cement:sand:aggregate).
M20 mix design ratio is 1:1.5:3, which means 1 part cement, 1.5 parts sand, and 3 parts aggregate.
This mix is commonly used for residential construction projects.
The strength of M20 concrete is typically around 20 MPa (megapascals) after 28 days of curing.
- Q5. What is compression strength?
- Ans.
Compression strength is the ability of a material to withstand loads that reduce the size of the material.
Compression strength is a measure of how much force a material can withstand before it starts to deform or break under compression.
It is an important property for materials used in construction, such as concrete and steel.
Compression strength is typically expressed in units of force per unit area, such as pounds pe
Interview Preparation Tips
Interview questions from similar companies
Selected
I applied via Naukri.com and was interviewed in Nov 2024. There was 1 interview round.
(9 Questions)
- Q1. About comapny profile
- Q2. Role and responsibility
- Q3. Can you describe a situation-based question you have encountered, such as a billing dispute?
- Q4. What is the end-to-end billing process?
- Ans.
The end-to-end billing process involves generating invoices, sending them to customers, and collecting payments.
Gathering billing information from various departments
Creating invoices based on services/products provided
Sending invoices to customers via email or mail
Following up on overdue payments
Recording payments received and updating accounts
- Q5. What is the accounts receivable (AR) cycle and what are its key components?
- Ans.
The AR cycle is the process of managing accounts receivable from invoicing to payment collection.
Key components include invoicing customers for goods/services rendered, tracking payments received, following up on overdue payments, and reconciling accounts.
The cycle starts with generating invoices and ends with receiving payments.
Effective management of the AR cycle is crucial for maintaining cash flow and ensuring time...
- Q6. What are the steps involved in creating a sales order and what are the key components?
- Ans.
Creating a sales order involves multiple steps and key components.
Gather customer information and product details
Enter the order into the system
Verify pricing and discounts
Confirm availability of products
Generate order confirmation for customer
Send order to fulfillment team for processing
Track order status and update customer
Invoice customer upon shipment
- Q7. What is the process for creating manual invoices, and why is the invoice number important?
- Ans.
Manual invoices are created by inputting customer and service details, assigning an invoice number, and sending to the client.
Gather customer information such as name, address, and contact details.
Input service details including description, quantity, rate, and total amount.
Assign a unique invoice number for tracking and reference purposes.
Include payment terms, due date, and any applicable taxes or discounts.
Send the ...
- Q8. How do you manage your workload and create a to-do list based on your tasks?
- Ans.
I prioritize tasks based on deadlines and importance, creating a to-do list with clear objectives and timelines.
I start by assessing the urgency and importance of each task
I use tools like calendars, task management apps, or physical planners to organize my tasks
I break down larger tasks into smaller, manageable steps to avoid feeling overwhelmed
I regularly review and update my to-do list to ensure I am on track and ad
- Q9. What are the credit and rebill processes?
- Ans.
Credit and rebill processes involve correcting billing errors and resubmitting claims for payment.
Credit process involves identifying and correcting billing errors, such as incorrect charges or missing information.
Rebill process involves resubmitting corrected claims to insurance companies or patients for payment.
Both processes require attention to detail and knowledge of billing regulations and procedures.
Examples inc...
Interview Preparation Tips
Selected
I applied via Company Website and was interviewed in Oct 2024. There were 2 interview rounds.
The aptitude test was hard, with over 70% of people likely to fail. However, by thinking practically and answering seriously, we can pass this round easily. There are 20 questions, but they don't reveal the cut-off marks or our scores. In my opinion, the cut-off may be 15 because I cleared this round and I think I scored 15. This is just my guess, as they didn't tell me my exact score.
(2 Questions)
- Q1. Self introduction
- Q2. Strength and weakness
Interview Preparation Tips
I applied via Naukri.com and was interviewed in Nov 2024. There was 1 interview round.
(1 Question)
- Q1. What is differ amount?
Interview Preparation Tips
Selected
I applied via Company Website and was interviewed in Nov 2023. There were 2 interview rounds.
(5 Questions)
- Q1. What the job nd when i ll join
- Q2. What the job........??
- Q3. When I ll be join...?
- Q4. What the salary......?
- Q5. Today you take the interview
Interview Preparation Tips
Normal questions they asked about education qualification
(2 Questions)
- Q1. In Deloitte green 🟢 dot what it represents?
- Ans.
The green dot in Deloitte represents that the person is currently online and available for communication.
The green dot indicates that the person is active and online on the Deloitte platform.
It signifies that the person is available for communication and can respond promptly.
The green dot helps in identifying who is currently online and can be contacted for immediate assistance.
It is a visual indicator that shows the p
- Q2. Guess the answer
- Ans.
The question is asking for a descriptive answer to a given question.
Provide a detailed response to the question asked
Include relevant examples if applicable
I applied via Naukri.com and was interviewed in Feb 2023. There were 3 interview rounds.
(4 Questions)
- Q1. Introduction self confidence
- Q2. Experience in worked organization
- Ans.
I have worked in two organizations in the billing department.
Worked as a Billing Executive at XYZ Company for 3 years
Managed billing processes, including invoicing, payment tracking, and resolving billing discrepancies
Collaborated with cross-functional teams to ensure accurate and timely billing
Implemented process improvements that reduced billing errors by 20%
Experience with billing software such as QuickBooks and SAP
- Q3. How to handle the work pressure
- Ans.
To handle work pressure, I prioritize tasks, practice time management, seek support from colleagues, and maintain a healthy work-life balance.
Prioritize tasks based on urgency and importance
Break down complex tasks into smaller manageable ones
Practice effective time management techniques like setting deadlines and using productivity tools
Delegate tasks to colleagues when necessary
Seek support and guidance from colleagu...
- Q4. I used to work effective manner which complete the task as day to day activities
Strategy assignment work process
Interview Preparation Tips
Selected
I applied via Recruitment Consulltant and was interviewed before Nov 2022. There were 4 interview rounds.
(1 Question)
- Q1. Tell me about your self, tell me about your family, tell me about your experience in your previous company
- Ans.
I have experience as a Billing Executive and can provide details about my family and previous company.
I have worked as a Billing Executive for 3 years in XYZ Company.
In my previous company, I was responsible for managing billing processes, generating invoices, and resolving billing discrepancies.
I have a strong understanding of billing software and systems, ensuring accurate and timely billing.
I have a supportive famil...
(1 Question)
- Q1. Advance excel test with salary break up and excel formula test
(1 Question)
- Q1. What is your area of interest, salary expectation
- Ans.
My area of interest is billing and finance. As for salary expectation, I am looking for a competitive compensation package.
I have a strong interest in the field of billing and finance.
I have experience and knowledge in handling billing processes and financial transactions.
I am detail-oriented and enjoy working with numbers and data.
I am familiar with billing software and systems, and have the ability to analyze and res...
I applied via campus placement at Sangola College, Sangola and was interviewed in Mar 2022. There were 4 interview rounds.
(1 Question)
- Q1. Any question can be asked like that what is mean by C?, Definition of C, etc
Interview Preparation Tips
- C, c++, Python, etc
I applied via AmbitionBox and was interviewed in Jun 2022. There were 2 interview rounds.
I'm interested in account,
Interview Preparation Tips
- Accounts Payable
- Accounting
- Account Management
Eywa Health Infra Interview FAQs
Tell us how to improve this page.
Interview Questions for Popular Designations
- Billing Engineer Interview Questions
- Planning & Billing Engineer Interview Questions
- Senior Billing Engineer Interview Questions
- Billing Executive Interview Questions
- Site & Billing Engineer Interview Questions
- Estimation & Billing Engineer Interview Questions
- Medical Billing Executive Interview Questions
- Civil Site & Billing Engineer Interview Questions
- Show more
People are getting interviews through
Interview Questions from Similar Companies
Eywa Health Infra Civil Billing Engineer Reviews and Ratings
based on 1 review
Rating in categories
|
Civil Billing Engineer
3
salaries
|  ₹4 L/yr - ₹4.3 L/yr |
TCS
Accenture
Wipro
Cognizant
Calculate your in-hand salary
- Home >
- Interviews >
- Eywa Health Infra Interview Questions >
- Eywa Health Infra Civil Billing Engineer Interview Questions
