Upload Button Icon Add office photos

Filter interviews by

Eptisa Highway and Pavement Engineer Interview Questions and Answers

Updated 11 Jan 2022

Eptisa Highway and Pavement Engineer Interview Experiences

1 interview found

I applied via Naukri.com and was interviewed in Dec 2021. There were 3 interview rounds.

Interview Questionnaire 

2 Questions

  • Q1. Specific gravity of water?
  • Ans. 

    Specific gravity of water is 1.0.

    • Specific gravity is the ratio of the density of a substance to the density of a reference substance.

    • Water is often used as the reference substance for specific gravity calculations.

    • The specific gravity of water is always 1.0 at standard temperature and pressure (STP).

  • Answered by AI
  • Q2. Specific gravity of water? Whom is your reporting officer? In which method fdd done? Required compaction of GSB by MORTH?
  • Ans. 

    Specific gravity of water, reporting officer, FDD method, and required compaction of GSB by MORTH are discussed.

    • Specific gravity of water is 1

    • Reporting officer is usually the immediate supervisor or manager

    • FDD (Falling Weight Deflectometer) method is used to measure pavement deflection

    • MORTH (Ministry of Road Transport and Highways) requires a minimum of 98% compaction for GSB (Granular Sub-Base)

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Telephonic interview firstly by HR department.Then after some technical questions asked by an authorised technical person.Working experience add in your scoring marks. Always try to give the answer in politely way.Dont you have to irritate and always give the assurance to interviewier that practically I am a perfection in this field,and more to more give the performance in better way

Interview questions from similar companies

I applied via Recruitment Consulltant and was interviewed in Mar 2022. There was 1 interview round.

Round 1 - Technical 

(2 Questions)

  • Q1. Explain compressor troubleshooting
  • Ans. 

    Compressor troubleshooting involves identifying and resolving issues with the compressor in a system.

    • Check for leaks in the system

    • Inspect the compressor for damage or wear

    • Check the electrical connections and wiring

    • Monitor the pressure and temperature readings

    • Clean or replace air filters

    • Check the oil level and quality

    • Inspect the belts and pulleys for wear or damage

  • Answered by AI
  • Q2. Prespare well and before interview make sure

Interview Preparation Tips

Interview preparation tips for other job seekers - Prepare well and all types mechanical equipment
Interview experience
5
Excellent
Difficulty level
Easy
Process Duration
2-4 weeks
Result
Not Selected

I applied via Newspaper Ad and was interviewed in Feb 2023. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(1 Question)

  • Q1. About Carriageways, Service Roads and patchwork i.e pot Holes, slippage cracks i.e alligator crack, horizontal or vertical crack, Undulating surface,rain cut, Metals beam crash barrier,Gaurd Rail or Mild s...
Round 3 - Technical 

(3 Questions)

  • Q1. Checking level of the layer
  • Q2. Testing the field dry density of the bed like Sub Grade ,GSB,WMM, DBM or BC
  • Q3. Checking the road width

Interview Preparation Tips

Interview preparation tips for other job seekers - Sir I m very hardworker employee .
I m very panchtual for my job duty and going to site daily and prepare daily progress report and also prepare monthly progress report.
Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Don’t add your photo or details such as gender, age, and address in your resume. These details do not add any value.
View all tips
Round 2 - One-on-one 

(5 Questions)

  • Q1. Basics civil engineering
  • Q2. How is your last project does
  • Q3. What is your additional skills
  • Q4. What about your addition launguage
  • Q5. Where is your home town

I applied via Approached by Company and was interviewed in Mar 2022. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Don’t add your photo or details such as gender, age, and address in your resume. These details do not add any value.
View all tips
Round 2 - Technical 

(1 Question)

  • Q1. Related to department

Interview Preparation Tips

Topics to prepare for Hyundai Engineering Civil Engineer interview:
  • Related to experience
Interview preparation tips for other job seekers - Please prepare professional cv related to work
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Walk-in and was interviewed in Jul 2024. There was 1 interview round.

Round 1 - Technical 

(5 Questions)

  • Q1. What is bar bending schedule
  • Ans. 

    Bar bending schedule is a document that provides details of reinforcement steel bars used in construction projects.

    • It includes details such as bar mark, bar size, quantity, shape, and bending dimensions.

    • Helps in estimating the quantity of steel required for construction.

    • Ensures proper placement and bending of reinforcement bars as per design specifications.

    • Used by contractors, engineers, and construction workers for re...

  • Answered by AI
  • Q2. 28 days concrete strength
  • Ans. 

    28 days concrete strength is the standard measure of concrete's compressive strength after 28 days of curing.

    • 28 days concrete strength is the standard measure of concrete's compressive strength after 28 days of curing

    • It is important for assessing the quality of concrete and its ability to support structural loads

    • The strength of concrete typically continues to increase beyond 28 days, but 28 days is the standard testing

  • Answered by AI
  • Q3. Difference between mivan and conventional
  • Ans. 

    Mivan is a modern construction technique using aluminum formwork, while conventional construction involves traditional methods like brick and mortar.

    • Mivan is faster and more efficient than conventional construction methods.

    • Mivan requires skilled labor for installation of aluminum formwork.

    • Conventional construction is more labor-intensive and time-consuming.

    • Mivan provides better quality finishes compared to conventional...

  • Answered by AI
  • Q4. What is self leveling concrete
  • Ans. 

    Self leveling concrete is a type of concrete that has a high flow consistency and is used to create smooth and level surfaces.

    • Self leveling concrete is designed to flow easily and settle into place without the need for troweling or leveling.

    • It is commonly used to level uneven floors before installing flooring materials such as tile or carpet.

    • Self leveling concrete can be applied in thicknesses ranging from a featheredg...

  • Answered by AI
  • Q5. How many days will take 1st Aluform mockup Concreting
  • Ans. 

    The 1st Aluform mockup concreting typically takes 1-2 days to complete.

    • 1-2 days is the usual timeframe for 1st Aluform mockup concreting

    • Factors such as weather conditions, size of the mockup, and availability of resources can affect the duration

    • Proper planning and coordination can help expedite the process

  • Answered by AI

Interview Preparation Tips

Topics to prepare for Shimizu Senior Site Engineer interview:
  • Construction
  • Structural
  • Quality Control
  • Quality Assurance
  • Bar Bending Schedule
  • Project Execution
Interview preparation tips for other job seekers - Be active and action to learn every step and work hard and smart . Please ensure technical criticis and how it resolve it
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Campus Placement and was interviewed in Apr 2024. There was 1 interview round.

Round 1 - One-on-one 

(2 Questions)

  • Q1. Where are you from Tell me something about yourself.
  • Ans. 

    I am from a small town in the Midwest and I am passionate about environmental conservation.

    • I grew up in a close-knit community in the Midwest

    • I have always been interested in protecting the environment

    • I enjoy outdoor activities like hiking and gardening

  • Answered by AI
  • Q2. Tell me about education background
  • Ans. 

    I have a Bachelor's degree in Computer Science from XYZ University.

    • Bachelor's degree in Computer Science

    • Graduated from XYZ University

    • Specialized in software development

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - It was an excellent experience for me.
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Approached by Company and was interviewed in Jun 2024. There was 1 interview round.

Round 1 - One-on-one 

(2 Questions)

  • Q1. Tell me about yourself
  • Q2. What do you know about our company

Interview Preparation Tips

Interview preparation tips for other job seekers - they will ask about some finance knowledge and the rest is just a normal interview question

Interview Questions & Answers

Hyundai Engineering user image

posted on 3 Jun 2022

I applied via Walk-in and was interviewed before Jun 2021. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - HR 

(1 Question)

  • Q1. Hr department getting test
Round 3 - Technical 

(1 Question)

  • Q1. Technical tèst about our working experience.

Interview Preparation Tips

Interview preparation tips for other job seekers - I am Instrument engineer construction side. I have good knowledge in oil and gas

I applied via Naukri.com and was interviewed before May 2021. There was 1 interview round.

Round 1 - One-on-one 

(1 Question)

  • Q1. Explanation about our work experience

Interview Preparation Tips

Interview preparation tips for other job seekers - Negotiate the salary considering the next 4-5 years, not sure about the increments every year. All are uncertain including your job security

Eptisa Interview FAQs

What are the top questions asked in Eptisa Highway and Pavement Engineer interview?

Some of the top questions asked at the Eptisa Highway and Pavement Engineer interview -

  1. Specific gravity of water? Whom is your reporting officer? In which method fdd ...read more
  2. Specific gravity of wat...read more

Tell us how to improve this page.

Eptisa Highway and Pavement Engineer Reviews and Ratings

based on 1 review

5.0/5

Rating in categories

5.0

Skill development

5.0

Work-life balance

4.0

Salary

4.0

Job security

4.0

Company culture

4.0

Promotions

4.0

Work satisfaction

Explore 1 Review and Rating
Civil Engineer
22 salaries
unlock blur

₹4.2 L/yr - ₹7 L/yr

Executive Accountant
14 salaries
unlock blur

₹2 L/yr - ₹4 L/yr

Construction Supervisor
9 salaries
unlock blur

₹3 L/yr - ₹4 L/yr

Office Manager
9 salaries
unlock blur

₹3.3 L/yr - ₹4 L/yr

Tunnel Engineer
7 salaries
unlock blur

₹4 L/yr - ₹10 L/yr

Explore more salaries
Compare Eptisa with

Ajax Engineering

4.0
Compare

Perkins

4.3
Compare

Balajee Group

3.7
Compare

The Louis Berger Group

4.3
Compare
Did you find this page helpful?
Yes No
write
Share an Interview