Filter interviews by
1 angle and 2 angle are terms used in engineering design to describe the orientation of a part or feature relative to a reference surface.
1 angle refers to a feature that is oriented parallel to the primary datum plane
2 angle refers to a feature that is oriented perpendicular to the primary datum plane
These terms are commonly used in geometric dimensioning and tolerancing (GD&T) to specify the orientation of features o...
Geometry and tolerance in design refer to the dimensions and allowable variations in a part or product.
Geometry refers to the shape and size of a part or product.
Tolerance is the allowable variation in dimensions to ensure proper fit and function.
Tolerances are specified using symbols like +, -, or a range of values.
For example, a hole may have a diameter of 10mm with a tolerance of +/- 0.1mm.
Tolerances can affect the
1 angle and 2 angle are terms used in engineering to describe the orientation of a part or feature in relation to a reference plane.
1 angle refers to the orientation of a part or feature with respect to one reference plane
2 angle refers to the orientation of a part or feature with respect to two reference planes
These terms are commonly used in engineering drawings to specify the orientation of features for manufacturin
I applied via Recruitment Consultant and was interviewed before Oct 2020. There were 3 interview rounds.
I applied via Referral and was interviewed before Jun 2022. There was 1 interview round.
I appeared for an interview before Feb 2024.
AC-DC converter converts alternating current (AC) to direct current (DC) for various applications.
AC voltage is converted to DC voltage using rectifiers
Rectifiers can be half-wave, full-wave, or bridge rectifiers
Filtering is done to smooth out the output voltage
Examples include power supplies for electronic devices and battery chargers
I applied via Job Fair and was interviewed before Apr 2023. There was 1 interview round.
Regarding electrical project related discussion
A substation is a facility used for transforming voltage levels in an electrical power system.
Substations receive high voltage electricity from power plants or transmission lines
They transform the voltage to a lower level for distribution to homes and businesses
Substations may also include equipment for protection, control, and monitoring of the power system
Transformers are classified based on their construction and cooling methods, such as dry-type, oil-filled, and cast resin transformers.
Transformers can be classified as dry-type, oil-filled, or cast resin based on their construction and cooling methods.
Dry-type transformers use air as the cooling medium and are suitable for indoor applications.
Oil-filled transformers use oil as the cooling medium and are commonly used ...
I appeared for an interview in Jul 2024.
I applied via Recruitment Consulltant and was interviewed in Aug 2023. There were 2 interview rounds.
based on 1 interview
Interview experience
based on 1 review
Rating in categories
Production Supervisor
50
salaries
| ₹1.7 L/yr - ₹3.1 L/yr |
Quality Engineer
46
salaries
| ₹1.2 L/yr - ₹3.6 L/yr |
Process Engineer
30
salaries
| ₹1.9 L/yr - ₹3.5 L/yr |
Production Engineer
27
salaries
| ₹1.6 L/yr - ₹3.8 L/yr |
Engineer Trainee
22
salaries
| ₹1.2 L/yr - ₹2.5 L/yr |
Amphenol Interconnect
East India Udyog
SasMos HET Technologies
Lucy Electric