Upload Button Icon Add office photos

Filter interviews by

Engineers India Production Manager Interview Questions and Answers

Updated 29 May 2024

Engineers India Production Manager Interview Experiences

1 interview found

Interview experience
3
Average
Difficulty level
-
Process Duration
-
Result
-
Round 1 - HR 

(1 Question)

  • Q1. Basic interview questions about engineering
Round 2 - Technical 

(1 Question)

  • Q1. What is 5s and what is kaizen?
  • Ans. 

    5s is a methodology for organizing a workplace for efficiency and effectiveness. Kaizen is a philosophy of continuous improvement.

    • 5s stands for Sort, Set in order, Shine, Standardize, Sustain. It involves organizing the workplace to improve efficiency and productivity.

    • Kaizen is a Japanese term meaning 'continuous improvement'. It involves making small, incremental changes to processes to improve quality and efficiency.

    • ...

  • Answered by AI

Interview questions from similar companies

Interview experience
4
Good
Difficulty level
Easy
Process Duration
-
Result
Not Selected

I applied via Referral and was interviewed in Oct 2024. There was 1 interview round.

Round 1 - Coding Test 

Easy 2 coding questions were asked

Interview experience
4
Good
Difficulty level
Hard
Process Duration
-
Result
-
Round 1 - Aptitude Test 

Duration will be 1 hour

Round 2 - Technical 

(1 Question)

  • Q1. 30 minutes duration it is
Round 3 - HR 

(1 Question)

  • Q1. About salary discussion
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Recruitment Consulltant and was interviewed in Nov 2022. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(7 Questions)

  • Q1. Type of casting defect and it's solution.
  • Ans. 

    Shrinkage defect caused by improper cooling. Solution is to increase cooling rate or add risers.

    • Shrinkage defect occurs due to improper cooling causing the metal to shrink and leave voids in the casting.

    • Solution is to increase cooling rate or add risers to provide additional molten metal to compensate for the shrinkage.

    • Other types of casting defects include porosity, cold shuts, misruns, and hot tears.

    • Porosity is cause...

  • Answered by AI
  • Q2. Getting design and die devlopment .
  • Q3. Degassing process and why it's necessary.
  • Ans. 

    Degassing is the process of removing dissolved gases from liquids to prevent defects and improve product quality.

    • Dissolved gases can cause defects in products such as bubbles or porosity.

    • Degassing is commonly used in the production of metals, plastics, and electronics.

    • Methods of degassing include vacuum degassing, sparging, and membrane degassing.

    • Degassing can also improve the shelf life and taste of food and beverages...

  • Answered by AI
  • Q4. Die casting process parameters and it's calculation.
  • Ans. 

    Die casting process parameters include temperature, pressure, and cycle time.

    • Temperature: affects the fluidity of the metal and the quality of the casting.

    • Pressure: determines the filling speed and the density of the casting.

    • Cycle time: affects the productivity and the quality of the casting.

    • Calculation involves determining the optimal values for each parameter based on the specific alloy and part design.

    • Factors such a...

  • Answered by AI
  • Q5. Mejor improvement project.
  • Q6. Shrinkage defect and it's prevention process.
  • Ans. 

    Shrinkage defect is a common casting defect caused by the solidification of metal.

    • Shrinkage defect occurs when the metal solidifies and shrinks before filling the entire mold cavity.

    • It can be prevented by increasing the pouring temperature, using risers, and modifying the mold design.

    • Proper gating and venting can also help prevent shrinkage defects.

    • Examples of shrinkage defects include shrinkage porosity and shrinkage

  • Answered by AI
  • Q7. HPDC pressure and velocity calculation.
Round 3 - HR 

(1 Question)

  • Q1. Why do you want to change this job.
  • Ans. 

    Looking for new challenges and opportunities to grow professionally.

    • Seeking a more challenging role that aligns with my career goals

    • Interested in exploring new technologies and industries

    • Want to work in a more collaborative and innovative environment

    • Looking for better work-life balance and career advancement opportunities

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Be technically sound you will crack the interview.

I applied via campus placement at KIIT University, Bhuvaneshwar and was interviewed in Aug 2022. There were 5 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Don’t add your photo or details such as gender, age, and address in your resume. These details do not add any value.
View all tips
Round 2 - Aptitude Test 

Very basic round where you just need to use your logic in apti.

Round 3 - Coding Test 

Only one code was given to run and that was from basic dsa

Round 4 - Technical 

(2 Questions)

  • Q1. Question related to Computer Networking
  • Q2. Question related to your project, resume and wireless networks
Round 5 - HR 

(1 Question)

  • Q1. It was merely a phone call where they asked my info and how the interview went.

Interview Preparation Tips

Interview preparation tips for other job seekers - Just be calm and brush your telecommunication and networking topics thoroughly
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
2-4 weeks
Result
Not Selected

I applied via Campus Placement and was interviewed in Jun 2022. There were 2 interview rounds.

Round 1 - Aptitude Test 

Logical,English, Mathematics,Coding MCQ

Round 2 - Technical 

(3 Questions)

  • Q1. Class,Objects, Polymorphism
  • Q2. Method overloading,Method overriding
  • Q3. Maths Puzzle,Tricky questions

Interview Preparation Tips

Interview preparation tips for other job seekers - Be confident,Make some knowledge about IBS software

Engineers India Interview FAQs

How many rounds are there in Engineers India Production Manager interview?
Engineers India interview process usually has 2 rounds. The most common rounds in the Engineers India interview process are HR and Technical.
What are the top questions asked in Engineers India Production Manager interview?

Some of the top questions asked at the Engineers India Production Manager interview -

  1. What is 5s and what is kaiz...read more
  2. Basic interview questions about engineer...read more

Tell us how to improve this page.

Engineers India Production Manager Interview Process

based on 1 interview

Interview experience

3
  
Average
View more

Interview Questions from Similar Companies

Crisil Interview Questions
3.6
 • 188 Interviews
NTPC Interview Questions
4.2
 • 157 Interviews
Bharat Petroleum Interview Questions
4.2
 • 148 Interviews
Suzlon Group Interview Questions
4.1
 • 129 Interviews
Sify Technologies Interview Questions
3.9
 • 121 Interviews
Eaton Interview Questions
3.9
 • 118 Interviews
CAMS Interview Questions
3.7
 • 115 Interviews
View all
Deputy Manager
168 salaries
unlock blur

₹6 L/yr - ₹20.5 L/yr

Senior Manager
111 salaries
unlock blur

₹15.5 L/yr - ₹42 L/yr

Senior Engineer
94 salaries
unlock blur

₹5.5 L/yr - ₹12.5 L/yr

Piping Designer
92 salaries
unlock blur

₹4 L/yr - ₹15 L/yr

Engineer
83 salaries
unlock blur

₹1.2 L/yr - ₹9.1 L/yr

Explore more salaries
Compare Engineers India with

BHEL

4.1
Compare

Oil And Natural Gas Corporation

4.4
Compare

Hindustan Petroleum

4.2
Compare

GAIL

4.5
Compare
Did you find this page helpful?
Yes No
write
Share an Interview