Upload Button Icon Add office photos

Filter interviews by

Cera Sanitaryware Senior Production Engineer Interview Questions, Process, and Tips

Updated 6 May 2023

Cera Sanitaryware Senior Production Engineer Interview Experiences

1 interview found

Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Recruitment Consulltant and was interviewed in Nov 2022. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(7 Questions)

  • Q1. Type of casting defect and it's solution.
  • Ans. 

    Shrinkage defect caused by improper cooling. Solution is to increase cooling rate or add risers.

    • Shrinkage defect occurs due to improper cooling causing the metal to shrink and leave voids in the casting.

    • Solution is to increase cooling rate or add risers to provide additional molten metal to compensate for the shrinkage.

    • Other types of casting defects include porosity, cold shuts, misruns, and hot tears.

    • Porosity is cause...

  • Answered by AI
  • Q2. Getting design and die devlopment .
  • Q3. Degassing process and why it's necessary.
  • Ans. 

    Degassing is the process of removing dissolved gases from liquids to prevent defects and improve product quality.

    • Dissolved gases can cause defects in products such as bubbles or porosity.

    • Degassing is commonly used in the production of metals, plastics, and electronics.

    • Methods of degassing include vacuum degassing, sparging, and membrane degassing.

    • Degassing can also improve the shelf life and taste of food and beverages...

  • Answered by AI
  • Q4. Die casting process parameters and it's calculation.
  • Ans. 

    Die casting process parameters include temperature, pressure, and cycle time.

    • Temperature: affects the fluidity of the metal and the quality of the casting.

    • Pressure: determines the filling speed and the density of the casting.

    • Cycle time: affects the productivity and the quality of the casting.

    • Calculation involves determining the optimal values for each parameter based on the specific alloy and part design.

    • Factors such a...

  • Answered by AI
  • Q5. Mejor improvement project.
  • Q6. Shrinkage defect and it's prevention process.
  • Ans. 

    Shrinkage defect is a common casting defect caused by the solidification of metal.

    • Shrinkage defect occurs when the metal solidifies and shrinks before filling the entire mold cavity.

    • It can be prevented by increasing the pouring temperature, using risers, and modifying the mold design.

    • Proper gating and venting can also help prevent shrinkage defects.

    • Examples of shrinkage defects include shrinkage porosity and shrinkage

  • Answered by AI
  • Q7. HPDC pressure and velocity calculation.
Round 3 - HR 

(1 Question)

  • Q1. Why do you want to change this job.
  • Ans. 

    Looking for new challenges and opportunities to grow professionally.

    • Seeking a more challenging role that aligns with my career goals

    • Interested in exploring new technologies and industries

    • Want to work in a more collaborative and innovative environment

    • Looking for better work-life balance and career advancement opportunities

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Be technically sound you will crack the interview.

Interview questions from similar companies

I was interviewed in Jul 2020.

Interview Questionnaire 

1 Question

  • Q1. Process parameters, fan flow calculation quality related questions

Interview Preparation Tips

Interview preparation tips for other job seekers - Aware about mill specifications
Process parameters flow calculation etc.

Senior Engineer Interview Questions & Answers

Kohler user image gujari santamanyu

posted on 25 May 2024

Interview experience
2
Poor
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(1 Question)

  • Q1. RS -485 questions
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
2-4 weeks
Result
Selected Selected

I applied via Approached by Company and was interviewed before Jul 2023. There were 3 interview rounds.

Round 1 - HR 

(1 Question)

  • Q1. Questions about Main job responsibilities, CTC & notice period
Round 2 - Technical 

(1 Question)

  • Q1. Question about Test procedures, Quality standards
Round 3 - One-on-one 

(1 Question)

  • Q1. Questions on Data analysis
Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(2 Questions)

  • Q1. Which type of pc firing
  • Ans. 

    PC firing refers to the type of firing system used in a power plant's boiler to ignite the fuel.

    • PC firing stands for Pulverized Coal firing, where coal is ground into fine powder before being injected into the boiler combustion chamber

    • It is a common method used in coal-fired power plants to efficiently burn coal and generate steam for electricity production

    • Other types of firing systems include fluidized bed combustion

  • Answered by AI
  • Q2. Witch type of cooler house
  • Ans. 

    The type of cooler house depends on the specific requirements of the production process, such as air flow, temperature control, and size.

    • Cooling towers for large-scale industrial production

    • Air conditioning units for smaller production facilities

    • Evaporative coolers for energy-efficient cooling solutions

    • Refrigeration units for temperature-sensitive production processes

  • Answered by AI
Round 2 - Technical 

(2 Questions)

  • Q1. Witch stage of preheater
  • Ans. 

    The preheater stage in cement production is the calciner stage.

    • The preheater typically consists of several stages including the cyclones and the calciner.

    • The calciner stage is where the raw materials are heated to high temperatures before entering the rotary kiln.

    • The calciner stage helps to reduce the energy consumption in the rotary kiln by preheating the raw materials.

    • An example of a preheater configuration is a 4-st

  • Answered by AI
  • Q2. How much capacity
  • Ans. 

    Capacity planning is crucial for ensuring optimal production output and resource utilization.

    • Capacity planning involves assessing current production capacity and forecasting future needs.

    • Factors to consider include equipment capabilities, workforce availability, and production demand.

    • Examples of capacity planning tools include production scheduling software and simulation models.

  • Answered by AI
Interview experience
5
Excellent
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Recruitment Consulltant and was interviewed in Mar 2022. There was 1 interview round.

Round 1 - Technical 

(1 Question)

  • Q1. Job profile Pyro section project and matinance

I applied via Walk-in and was interviewed in Jun 2022. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(1 Question)

  • Q1. Project related question

Interview Preparation Tips

Interview preparation tips for other job seekers - I am Rajeev Malik with over 5.2 years of work experience in construction industry.As a dynamic professional I have worked on Industrial and Residential projects of Indianstandards as a Client & Contractor have in depth knowledge of project development ,rightfrom execution stage till commissioning stage.I am well versed with construction procedures & methodologies of these sectors andworked on industry recognized project software’s as a tool to implement the constructionprocess. My job profile is suitable for a Site Incharge including Structure Engineer.On an academic front I am a Civil Engineer with B.tech from GLA University of technology & management Mathura 2017.I am well versed with all the MS office software’s ,AutoCAD .Iwould appreciate an opportunity to discuss my qualifications is suitable for applied post. Iamc omfortable to work with different community with different language of skills.
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
2-4 weeks
Result
Selected Selected

I applied via Naukri.com and was interviewed in Oct 2023. There were 2 interview rounds.

Round 1 - HR 

(1 Question)

  • Q1. Experience, Salary Disscus, Why want you join JK ETC
Round 2 - Technical 

(1 Question)

  • Q1. Different Types questions like Electrical Engineer
Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-
Round 1 - One-on-one 

(2 Questions)

  • Q1. Stripping Ratio, MMR, Mine Management
  • Q2. Drilling and Blasting, Shot sequence, Safety Plan

Interview Questionnaire 

3 Questions

  • Q1. Tell me about urself,
  • Q2. Site related questions like silo slip form details, piling details.
  • Q3. Achievements in short

Cera Sanitaryware Interview FAQs

How many rounds are there in Cera Sanitaryware Senior Production Engineer interview?
Cera Sanitaryware interview process usually has 3 rounds. The most common rounds in the Cera Sanitaryware interview process are Resume Shortlist, Technical and HR.
What are the top questions asked in Cera Sanitaryware Senior Production Engineer interview?

Some of the top questions asked at the Cera Sanitaryware Senior Production Engineer interview -

  1. Degassing process and why it's necessa...read more
  2. Die casting process parameters and it's calculati...read more
  3. Type of casting defect and it's soluti...read more

Tell us how to improve this page.

Cera Sanitaryware Senior Production Engineer Interview Process

based on 1 interview

Interview experience

5
  
Excellent
View more

Interview Questions from Similar Companies

JK Cement Interview Questions
4.1
 • 255 Interviews
ACC Interview Questions
3.9
 • 190 Interviews
Ambuja Cements Interview Questions
3.9
 • 109 Interviews
JSW Cement Interview Questions
4.1
 • 103 Interviews
Nuvoco Vistas Interview Questions
4.1
 • 94 Interviews
Star Cement Interview Questions
4.0
 • 64 Interviews
HIL Limited Interview Questions
4.1
 • 61 Interviews
Jaquar Interview Questions
4.1
 • 57 Interviews
View all
Assistant Manager
154 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Sales Executive
61 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Deputy Manager
54 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Sales Officer
42 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Assistant Sales Manager
35 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Explore more salaries
Compare Cera Sanitaryware with

Hindware Limited

3.9
Compare

Jaquar

4.1
Compare

Parryware

3.9
Compare

Roca India

3.9
Compare
Did you find this page helpful?
Yes No
write
Share an Interview