Add office photos
Filter interviews by
Eastman Infrastructure Civil Site Engineer Interview Questions, Process, and Tips
Eastman Infrastructure Civil Site Engineer Interview Experiences
1 interview found
Anonymous
I applied via Referral and was interviewed before Sep 2020. There were 3 interview rounds.
Interview Questionnaire
6 Questions
- Q1. What do you know about piling works?
- Ans.
Piling works involve the construction of deep foundations to support structures on unstable soil or rock.
Piling works are used to transfer the load of a structure to a deeper, more stable layer of soil or rock.
Different types of piles are used, such as driven piles, bored piles, and auger cast piles.
Piling works are commonly used in the construction of bridges, high-rise buildings, and waterfront structures.
Piles can b...
- Q2. How many types of polymer test before drilling pile?
- Ans.
There are typically three types of polymer tests conducted before drilling pile.
Polymer viscosity test
Polymer filtration test
Polymer compatibility test
- Q3. What is viscosity and how much viscosity of polymer??
- Ans.
Viscosity is the measure of a fluid's resistance to flow. The viscosity of a polymer depends on its molecular weight and temperature.
Viscosity is a property of fluids that determines their flow behavior.
It is a measure of a fluid's resistance to flow.
Viscosity is influenced by factors like temperature and molecular weight.
Polymers can have different viscosities depending on their molecular weight and temperature.
Higher...
- Q4. How many pile load test ?
- Ans.
The number of pile load tests required depends on various factors such as project specifications, soil conditions, and design requirements.
The number of pile load tests is determined based on the project specifications and design requirements.
The soil conditions at the site play a crucial role in determining the number of pile load tests.
Different types of pile load tests, such as static load tests and dynamic load tes...
- Q5. Before piling works how to decide to how much depth of bore pile?
- Ans.
The depth of bore pile is decided based on soil investigation report and load-bearing capacity of soil.
Soil investigation report helps to determine the soil type and its load-bearing capacity.
The load-bearing capacity of soil is determined by conducting Standard Penetration Test (SPT) or Cone Penetration Test (CPT).
The depth of bore pile is decided based on the load-bearing capacity of soil and the design load of the s...
- Q6. We decide according to soil bearing capacity .
Interview Preparation Tips
Top trending discussions
Interview questions from similar companies
I applied via Job Fair and was interviewed in Nov 2023. There were 2 interview rounds.
In general, aptitude tests measure ones competence in logical reasoning, numerical skills, or verbal ability.
(5 Questions)
- Q1. What is the technical in my site ?
- Q2. What about this company ?
- Q3. What about my empolys ?
- Q4. In many cases what will be approch in this technical issus ?
- Ans.
The approach to technical issues in civil engineering often involves analyzing the problem, considering various solutions, and selecting the most feasible option.
Identify the technical issue and its impact on the project
Analyze the possible solutions and their pros and cons
Consider factors such as cost, time, and resources
Consult with team members or experts for input
Select the most feasible solution and implement it
Mo
- Q5. What is the technical ?
Interview Preparation Tips
I applied via Naukri.com
(3 Questions)
- Q1. What is cement grade?
- Ans.
Cement grade refers to the strength and quality of cement used in construction.
Cement grade is determined by the compressive strength of cement mortar cubes after 28 days of curing.
The most commonly used cement grades are 33, 43, and 53, indicating their respective compressive strengths in megapascals (MPa).
Higher cement grades are used for structures that require higher strength, such as bridges and high-rise building...
- Q2. Opc 33, 43, 53 grads.
- Q3. The standard size of a concrete cube is 15 cm × 15 cm × 15 cm
- Ans.
Yes, the standard size of a concrete cube is 15 cm × 15 cm × 15 cm.
The standard size of a concrete cube is used for testing the compressive strength of concrete.
The cubes are casted and cured for 28 days before testing.
The cubes are tested using a compression testing machine.
The compressive strength of concrete is calculated by dividing the maximum load applied to the cube by the cross-sectional area of the cube.
Interview Preparation Tips
I applied via Company Website and was interviewed in Sep 2022. There were 2 interview rounds.
(2 Questions)
- Q1. What is the curing on site engineering
- Ans.
Curing is the process of maintaining moisture and temperature conditions for freshly placed concrete to promote its hydration and strength gain.
Curing is essential for the strength and durability of concrete.
It involves keeping the concrete moist and at a proper temperature for a specific period of time.
Curing can be done using various methods such as water curing, membrane curing, and steam curing.
The duration of curi...
- Q2. What is the strength of cement
- Ans.
The strength of cement depends on its grade and type.
The strength of cement is measured in terms of compressive strength.
The grade of cement determines its strength. Higher the grade, higher the strength.
Type of cement also affects its strength. For example, Portland cement has higher strength than lime cement.
The strength of cement is also influenced by factors such as curing time, temperature, and humidity.
Interview Preparation Tips
a capability to do a job
I applied via Campus Placement and was interviewed in Mar 2022. There were 2 interview rounds.
General knowledge
(2 Questions)
- Q1. About civil engineering
- Q2. General knowledge Civil engineering
Interview Preparation Tips
I'm studying BTech engeneering
& Complete my diploma
I'm a good student
I applied via Naukri.com and was interviewed in Sep 2021. There was 1 interview round.
Interview Questionnaire
3 Questions
- Q1. Contraction lebal questions
- Q2. Jenral questions
- Q3. Atitude prasnalty
Interview Preparation Tips
Practice (out loud)
Share your story
Provide Evidence and data
Mirror the interviewers style
Prepare a few questions
Ask if they have any hesitation
Say thanks.
(2 Questions)
- Q1. Trouble shooting
- Q2. Monitoring log dob maven
Interview Preparation Tips
I applied via Company Website and was interviewed in Aug 2023. There were 3 interview rounds.
Test of sand and water mineral
(5 Questions)
- Q1. Direct are located in one place and another place etc..,
- Q2. Overall base of autocad desgin structure
- Ans.
Autocad design structure serves as the foundation for creating detailed and accurate engineering drawings.
Autocad design structure includes layers, blocks, and dimensions to organize and display information.
It allows for precise measurements, annotations, and annotations to be added to drawings.
Autocad design structure enables easy editing and modification of drawings.
Examples of autocad design structures include creat...
- Q3. Graphic design and interior design
- Q4. Design of road line
- Ans.
Design of road line involves determining the alignment, width, and markings of a road to ensure safety and efficiency.
Consider the traffic volume and speed when determining the width of the road.
Ensure proper alignment to minimize sharp curves and slopes.
Include appropriate road markings such as lane dividers, pedestrian crossings, and stop lines.
Take into account factors like drainage, visibility, and road conditions
- Q5. Construction of road project
- Ans.
Construction of road project involves planning, design, and execution of building roads for transportation.
Road project starts with surveying the land and designing the road layout.
Materials like asphalt, concrete, and gravel are used for construction.
Proper drainage systems are essential to prevent water damage to the road.
Quality control measures are implemented to ensure durability and safety.
Regular maintenance and...
Interview Preparation Tips
Web design
Graphic design
Interior design
Pumps desgin
Skills evaluated in this interview
mayuri bhosale
(2 Questions)
- Q1. Oops concepts php
- Q2. Aggregate function php
(1 Question)
- Q1. HDD related Fttx
(1 Question)
- Q1. Expected CTC Why you want to join the company
Eastman Infrastructure Interview FAQs
Tell us how to improve this page.
Interview Questions for Popular Designations
- Civil Site Supervisor Interview Questions
- Civil Engineer Interview Questions
- Senior Civil Site Engineer Interview Questions
- Junior Engineer Civil Interview Questions
- Senior Civil Engineer Interview Questions
- Site Engineer Interview Questions
- Civil Foreman Interview Questions
- Civil Supervisor Interview Questions
- Show more
Civil Site Engineer Interview Questions from Similar Companies
|
Quality Engineer
4
salaries
|  ₹3.3 L/yr - ₹4.3 L/yr |
|
Civil Site Engineer
3
salaries
| ₹3 L/yr - ₹5.1 L/yr |
TCS
Accenture
Cognizant
Infosys
- Home >
- Interviews >
- Eastman Infrastructure Interview Questions >
- Eastman Infrastructure Civil Site Engineer Interview Questions
