Add office photos
Filter interviews by
Dual Manufacturing Technologies Quality Assurance Engineer Associate Interview Questions and Answers
Dual Manufacturing Technologies Quality Assurance Engineer Associate Interview Experiences
1 interview found
(4 Questions)
- Q1. Basic quality tools
- Q2. What is msa in quality
- Ans.
MSA stands for Measurement System Analysis, which is a method used to evaluate the performance of a measurement system.
MSA helps to ensure that the measurement system is reliable and provides accurate results.
It involves assessing the accuracy, precision, and stability of the measurement system.
Common tools used in MSA include Gage R&R (Repeatability and Reproducibility) studies and bias studies.
MSA is important in ind...
- Q3. What is total quality control
- Ans.
Total quality control is a management approach that focuses on continuous improvement and involvement of all employees in the quality process.
Involves all employees in the quality process
Focuses on continuous improvement
Emphasizes prevention of defects rather than detection
Uses tools like statistical process control and quality circles
Strives for customer satisfaction
- Q4. What is cp and cpk
- Ans.
Cp and Cpk are process capability indices used to measure the ability of a process to produce output within specification limits.
Cp is a measure of how well the process can meet the specifications based on the spread of data.
Cpk takes into account the centering of the process mean in addition to the spread of data.
A Cp value greater than 1 indicates that the process spread is less than the specification spread.
A Cpk va...
(1 Question)
- Q1. Quality control aspects
Interview Preparation Tips
Top trending discussions
Interview questions from similar companies
Supplier Quality Assurance Engineer Interview Questions & Answers
TVS Motor
soundhar Rajan
posted on 13 Dec 2024
Selected
I applied via Recruitment Consulltant and was interviewed in Nov 2024. There were 3 interview rounds.
(2 Questions)
- Q1. What are the PPAP documents ?
- Ans.
PPAP documents are a set of documents used in the automotive industry to ensure suppliers meet quality standards.
PPAP documents include items such as design records, engineering change documents, process flow diagrams, control plans, measurement system analysis, and more.
They are used to demonstrate that the supplier has understood the customer's requirements and has processes in place to consistently meet those requir...
- Q2. What level you know PPAP?
- Ans.
PPAP stands for Production Part Approval Process and is a standardized process in the automotive industry to ensure suppliers meet quality requirements.
PPAP is a standardized process in the automotive industry to ensure suppliers meet quality requirements
It involves submitting documentation such as design records, process flow diagrams, and control plans
PPAP typically consists of 18 elements including dimensional resul...
Tell me what is your strength about quality assurance?
(1 Question)
- Q1. Problem solving procedure for process.
- Ans.
The problem-solving procedure for a process involves identifying the issue, analyzing the root cause, developing solutions, implementing the best solution, and monitoring the results.
Identify the problem or issue in the process
Analyze the root cause of the problem
Develop potential solutions to address the root cause
Implement the best solution
Monitor and evaluate the results to ensure effectiveness
Interview Preparation Tips
Selected
I applied via AmbitionBox and was interviewed in Aug 2024. There were 3 interview rounds.
(5 Questions)
- Q1. Define the voltage and current
- Ans.
Voltage is the measure of electrical potential difference, while current is the flow of electric charge.
Voltage is measured in volts (V) and represents the potential difference between two points in a circuit
Current is measured in amperes (A) and represents the flow of electric charge through a circuit
Ohm's Law relates voltage, current, and resistance: V = I * R
Voltage sources include batteries, power supplies, and gen...
- Q2. Define the analog and digital signal
- Ans.
Analog signals are continuous, varying in amplitude and frequency. Digital signals are discrete, represented by binary numbers.
Analog signals have infinite possible values within a range
Digital signals have only two possible values, 0 and 1
Examples of analog signals include sound waves and light waves
Examples of digital signals include computer data and CDs
- Q3. Define the electrical and electronics
- Ans.
Electrical engineering deals with the study and application of electricity, electronics focuses on the study of electronic components and systems.
Electrical engineering involves the generation, distribution, and utilization of electrical power.
Electronics focuses on the design and development of electronic circuits, devices, and systems.
Examples of electrical engineering include power generation plants, transmission li...
- Q4. Define the diode and semiconductor devices
- Ans.
A diode is a semiconductor device that allows current to flow in one direction only.
Diodes are made of semiconductor materials such as silicon or germanium.
They have two terminals - an anode and a cathode.
When a positive voltage is applied to the anode and a negative voltage to the cathode, the diode conducts electricity.
Diodes are commonly used in rectifiers, voltage regulators, and signal demodulation.
Examples of dio...
- Q5. Define the ohm’s law formula
- Ans.
Ohm's law formula relates voltage, current, and resistance in an electrical circuit.
Ohm's law formula is V = I * R
V represents voltage in volts
I represents current in amperes
R represents resistance in ohms
The formula can be rearranged to solve for different variables, such as I = V / R or R = V / I
Electronics coding decoding
What is coding decoding
RENU BHORIA
(1 Question)
- Q1. About Manual testing
(1 Question)
- Q1. About agile and testing methodology
Executive Quality Assurance Interview Questions & Answers
Asian Paints
Anonymous
posted on 21 Feb 2024
Selected
I applied via Naukri.com and was interviewed in Aug 2023. There were 3 interview rounds.
Very critical prepare before giving
(2 Questions)
- Q1. What's your interests
- Q2. What's your contribution to previous organization
(1 Question)
- Q1. What are your thoughts after joining Asian Paints
Selected
I applied via Naukri.com and was interviewed in Jan 2024. There was 1 interview round.
(1 Question)
- Q1. General IPQA question they ask
Interview Preparation Tips
Quality Assurance Interview Questions & Answers
Sun Pharmaceutical Industries
Anonymous
posted on 4 Jul 2023
(1 Question)
- Q1. If you got milestone of 1 cr after that you can continue as employee in our company or switch company??
(1 Question)
- Q1. What is your salary expectation ??
(1 Question)
- Q1. If in case you are not selected for the post what will you do ??
Rupak Ghosh
I applied via Referral and was interviewed in Oct 2022. There were 2 interview rounds.
(2 Questions)
- Q1. Question will be based on subject of expertise and job role
- Q2. Basic knowledge on your subject of expertization
Interview Preparation Tips
Supplier Quality Assurance Engineer Interview Questions & Answers
Hero MotoCorp
Anonymous
posted on 2 Jun 2022
I applied via Naukri.com and was interviewed in May 2022. There was 1 interview round.
(1 Question)
- Q1. Aiag core tools, qualitys system, supplier selection new part devlopment
Interview Preparation Tips
Team Leader-Quality Assurance/Quality Control Interview Questions & Answers
Tata Motors
Anonymous
posted on 27 Jul 2021
Interview Questionnaire
5 Questions
- Q1. Varniyear calipers listcount
- Q2. Drilling machine and rimar machine different
- Ans.
Drilling machine and rimar machine are different in terms of their purpose and functionality.
Drilling machine is used to create holes in various materials, while rimar machine is used for shaping and finishing rims of objects.
Drilling machine typically has a rotating drill bit, while rimar machine may have different tools such as grinding wheels or cutters.
Drilling machine is commonly used in construction, woodworking,...
- Q3. Varniyear calipers and micromiter different
- Ans.
Vernier calipers and micrometers are different measuring tools used in quality control.
Vernier calipers are used to measure dimensions with high accuracy, while micrometers are used for precise measurements.
Vernier calipers have a sliding scale and a main scale, allowing for both internal and external measurements.
Micrometers have a spindle and anvil, and are typically used for measuring thickness or diameter.
Both tool...
- Q4. Micrometer List count
- Ans.
Micrometer list count is a measure of the number of micrometers available in the inventory.
Micrometer list count is important for tracking inventory levels and ensuring that there are enough micrometers available for use.
It is also important for budgeting and purchasing decisions.
Examples of factors that can affect micrometer list count include usage rates, breakage, and loss or theft.
Regular inventory checks and maint...
- Q5. File
Dual Manufacturing Technologies Interview FAQs
Tell us how to improve this page.
Interview Questions for Popular Designations
- Quality Assurance Interview Questions
- Quality Assurance Officer Interview Questions
- Quality Assurance/Quality Control Manager Interview Questions
- Executive Quality Assurance Interview Questions
- Assistant Manager Quality Assurance Interview Questions
- Quality Assurance and Testing Interview Questions
- Assurance Associate Interview Questions
- Quality Assurance Analyst Interview Questions
- Show more
Interview Questions from Similar Companies
Dual Manufacturing Technologies Quality Assurance Engineer Associate Reviews and Ratings
based on 1 review
Rating in categories
|
Quality Engineer
4
salaries
|  ₹2 L/yr - ₹4.5 L/yr |
|
Quaity Control Engineer
4
salaries
| ₹2.4 L/yr - ₹4 L/yr |
|
Machine Operator
3
salaries
| ₹3.2 L/yr - ₹3.2 L/yr |
|
Quality Assurance Engineer Associate
3
salaries
| ₹3.5 L/yr - ₹24 L/yr |
Bharat Forge
Tata Motors
Mahindra & Mahindra
Godrej Industries
Calculate your in-hand salary
- Home >
- Interviews >
- Dual Manufacturing Technologies Interview Questions >
- Dual Manufacturing Technologies Quality Assurance Engineer Associate Interview Questions
