Filter interviews by
I applied via Referral and was interviewed in Apr 2024. There was 1 interview round.
Slab shuttering is checked by ensuring proper alignment, levelness, and stability of formwork before concrete pouring.
Check alignment of formwork with respect to the structural drawings
Ensure formwork is level using a spirit level
Inspect the stability of formwork to prevent any collapse during concrete pouring
Check for any gaps or misalignments in the formwork that may affect the quality of the slab
Verify that all nece...
Concrete quantity can be calculated by multiplying the volume of the area to be filled by the density of the concrete.
Calculate the volume of the area to be filled (length x width x height)
Determine the density of the concrete (usually around 2400 kg/m^3)
Multiply the volume by the density to get the total concrete quantity needed
Consider adding a percentage for wastage or spillage
Lapping is provided in columns to ensure proper bonding between the column reinforcement and the beam reinforcement.
Lapping is typically provided at the junction of vertical and horizontal reinforcement bars in columns.
It helps in transferring the load from the column to the beam effectively.
The length of lapping required is specified in the structural drawings or as per design requirements.
Proper lapping ensures struc...
Top trending discussions
I applied via Walk-in and was interviewed before Feb 2021. There were 2 interview rounds.
There are several types of water supply pipes available in the market. Some of the popular ones are copper, PVC, PEX, and galvanized steel.
Copper pipes are durable and resistant to corrosion. They are commonly used in residential and commercial buildings.
PVC pipes are lightweight and easy to install. They are commonly used in irrigation systems and swimming pools.
PEX pipes are flexible and easy to install. They are com...
There are various types of drainage pipes available in the market with different make names.
PVC pipes - made by companies like Astral, Finolex, and Supreme
HDPE pipes - made by companies like Jain Irrigation, Kisan, and Prince
Cast iron pipes - made by companies like Tata, Jindal, and Electrosteel
Concrete pipes - made by companies like Hume, RCP, and Hanson
Corrugated pipes - made by companies like ADS, NDS, and Timewell
Sprinklers are classified based on temperature and color code. Each type is designed for specific fire hazards.
Blue: 57°C (135°F) - Ordinary Combustibles
Orange: 68°C (155°F) - Flammable Liquids
Red: 79°C (175°F) - Electrical Equipment
Green: 93°C (200°F) - Storage
Yellow: 141°C (286°F) - Extra High Temperature
Purple: 182°C (360°F) - Extreme High Temperature
System testing and commissioning involves verifying and validating the functionality of a system before it is put into operation.
Develop a test plan that outlines the testing process and criteria
Execute the test plan to ensure that the system meets the requirements
Document any issues or defects found during testing
Fix any issues or defects and retest
Once testing is complete, commission the system by putting it into ope...
Handover process involves transferring responsibility and ownership of a project or facility from one party to another.
Ensure all necessary documentation is complete and accurate
Conduct a thorough inspection of the project or facility
Provide training and orientation to the new party
Establish clear communication channels for ongoing support
Obtain sign-off and acknowledgement of the handover
Examples: handover of a constr...
I applied via Naukri.com and was interviewed in Mar 2023. There were 5 interview rounds.
Stock checking salary record maintain
Salary checking from payment labour
Work group discussion and company work discuss
I applied via Company Website and was interviewed before Oct 2020. There were 4 interview rounds.
SFD & BMD for a simply supported load
SFD is a diagram that shows the variation of shear force along the length of a beam
BMD is a diagram that shows the variation of bending moment along the length of a beam
For a simply supported load, the SFD will be a straight line with a constant slope
The BMD will be a parabolic curve with the maximum value at the center of the beam
The SFD and BMD can be calculated using equations an
I applied via Referral and was interviewed before Aug 2020. There were 3 interview rounds.
BBS preparation is essential for ensuring the strength and stability of footings and slabs.
BBS stands for Bar Bending Schedule and involves preparing a detailed list of reinforcement bars required for the footing or slab.
The BBS takes into account the design drawings and specifications to ensure the correct size, spacing, and placement of reinforcement bars.
The BBS also helps to estimate the quantity of steel required ...
The quantity of cement and sand in 1sqm plastering depends on the thickness of the plaster.
The thickness of the plaster is a crucial factor in determining the quantity of cement and sand.
The ratio of cement to sand also affects the quantity.
For a 15mm thick plaster, the approximate quantity of cement is 16 kg and sand is 75 kg per square meter.
For a 20mm thick plaster, the approximate quantity of cement is 21 kg and sa
posted on 29 Aug 2023
I applied via Naukri.com and was interviewed in Mar 2023. There were 2 interview rounds.
RCC Mivon shuttering experience involves using reinforced concrete construction techniques for formwork and scaffolding.
Experience in setting up formwork and scaffolding for reinforced concrete structures
Knowledge of RCC Mivon shuttering techniques and materials
Ability to interpret construction drawings and plans for RCC Mivon shuttering
Experience in coordinating with construction teams and contractors for RCC Mivon sh
posted on 26 Sep 2023
I applied via Company Website and was interviewed before Sep 2022. There were 2 interview rounds.
OCB stands for Oil Circuit Breaker, a type of circuit breaker that uses oil as the medium for arc extinction.
OCB is commonly used in high voltage applications.
The oil in OCB helps to extinguish the arc that forms when the circuit breaker interrupts the current flow.
OCBs are known for their reliability and ability to handle high current interruptions.
Example: A transformer substation may use OCBs for circuit protection.
APFC Panel stands for Automatic Power Factor Capacitor Panel.
APFC Panel is used to improve power factor in electrical systems.
It automatically switches capacitors in and out of the circuit to maintain a desired power factor.
Helps in reducing electricity bills by avoiding penalties for low power factor.
Example: APFC Panel is commonly used in industries and commercial buildings.
It helps in optimizing energy usage and red
posted on 6 Aug 2023
I applied via Approached by Company and was interviewed before Aug 2022. There were 4 interview rounds.
based on 1 interview
Interview experience
based on 3 reviews
Rating in categories
Assistant Manager
66
salaries
| ₹0 L/yr - ₹0 L/yr |
Senior Executive
27
salaries
| ₹0 L/yr - ₹0 L/yr |
Sales Manager
22
salaries
| ₹0 L/yr - ₹0 L/yr |
Senior Manager
21
salaries
| ₹0 L/yr - ₹0 L/yr |
Executive Engineer
20
salaries
| ₹0 L/yr - ₹0 L/yr |
Godrej Properties
Sobha
Prestige Group
Brigade Group