Filter interviews by
Be the first one to contribute and help others!
I applied via Seek and was interviewed in Aug 2024. There were 3 interview rounds.
I have 5 years of experience working as a Quality Engineer in the manufacturing industry.
5 years of experience as a Quality Engineer
Experience in implementing quality control processes
Knowledge of quality standards and regulations
Experience in conducting quality audits and inspections
Experience in root cause analysis and problem-solving
Seeking new challenges and opportunities for growth in a different work environment.
Desire for career advancement
Seeking new challenges
Relocation
Company downsizing
Better work-life balance
I investigate a quality issue by gathering data, analyzing root causes, implementing corrective actions, and monitoring results.
Gather relevant data and documentation related to the quality issue
Analyze the data to identify potential root causes of the issue
Develop and implement corrective actions to address the root causes
Monitor the effectiveness of the corrective actions and make adjustments as needed
Lack of communication and unclear expectations frustrate me.
Lack of communication between team members
Unclear expectations from management
Inefficient processes causing delays
Micromanagement
Lack of recognition for hard work
Validation ensures the product meets the customer's needs, while verification ensures the product is built correctly.
Validation is the process of evaluating a product to ensure it meets the customer's requirements and needs.
Verification is the process of evaluating whether a product is built correctly according to the specifications and requirements.
Validation answers the question 'Are we building the right product?' w...
Passion for ensuring quality standards and continuous improvement in engineering processes.
Passion for quality assurance and process improvement
Interest in utilizing engineering skills to enhance product quality
Desire to contribute to a team focused on excellence
Previous experience in quality control or process optimization
posted on 24 Dec 2024
I applied via Referral and was interviewed in Nov 2024. There was 1 interview round.
posted on 24 Jul 2024
I applied via Recruitment Consulltant and was interviewed in Jun 2024. There were 3 interview rounds.
Humidity is required to maintain a comfortable and healthy environment, prevent static electricity, preserve certain materials, and support plant growth.
Maintains a comfortable environment by preventing dryness in the air
Helps prevent static electricity buildup, which can damage electronics
Preserves certain materials like wood, leather, and musical instruments
Supports plant growth by providing necessary moisture for ph
Humidity typically increases during the night and early morning hours due to cooler temperatures and higher relative humidity.
Humidity tends to increase during the night when temperatures drop and air can hold less moisture.
Early morning hours also see an increase in humidity as temperatures start to rise and dew forms.
Factors such as proximity to bodies of water, vegetation, and weather patterns can also influence hum...
HEPA filters are designed to capture particles as small as 0.3 microns due to their ability to efficiently trap particles of that size.
HEPA filters are designed to capture particles of various sizes, including very small particles like viruses and bacteria.
0.3 microns is considered the most penetrating particle size, meaning particles of this size are the most difficult to capture.
HEPA filters are able to efficiently t...
Blower CFM can be calculated by multiplying the air velocity by the cross-sectional area of the duct.
Calculate the cross-sectional area of the duct (in square feet or square meters)
Measure the air velocity (in feet per minute or meters per second)
Multiply the air velocity by the cross-sectional area to get the CFM
Example: Cross-sectional area = 5 sq ft, Air velocity = 100 ft/min, CFM = 5 sq ft * 100 ft/min = 500 CFM
AHU data sheet contains information about air handling unit specifications, dimensions, performance, and components.
Specifications of the air handling unit (AHU)
Dimensions and weight of the AHU
Performance data including airflow rates, static pressure, and efficiency
Details of components such as fans, coils, filters, and dampers
Electrical requirements and power consumption
Control options and features
Maintenance requirem
I would take measurements such as airflow rate, pressure, power consumption, and noise level to determine the appropriate blower for ordering.
Airflow rate: measure the volume of air moved per unit of time
Pressure: measure the force exerted by the blower to push air
Power consumption: measure the amount of electrical power needed to operate the blower
Noise level: measure the sound produced by the blower during operation
Friction loss can be calculated using the Darcy-Weisbach equation, which takes into account the pipe material, diameter, length, flow rate, and roughness factor.
Use the Darcy-Weisbach equation: f = (4 * f * L * V^2) / (2 * g * D)
Where f is the friction factor, L is the length of the pipe, V is the flow velocity, g is the acceleration due to gravity, and D is the diameter of the pipe.
Friction factor can be determined ba...
Maintaining water velocity of RO water is crucial for efficient filtration and production of high-quality water.
Maintaining water velocity ensures proper pressure and flow rate for effective filtration process
Optimal water velocity prevents fouling and scaling of RO membranes
Recommended water velocity for RO systems is typically between 0.5 to 2 meters per second
posted on 21 May 2024
posted on 18 Oct 2024
I am a dedicated Quality Engineer with a strong background in ensuring product quality and process improvement.
Experienced in implementing quality control procedures
Skilled in conducting root cause analysis
Proficient in using quality tools such as FMEA and Six Sigma
Strong communication and problem-solving skills
Certified in quality management systems like ISO 9001
I am responsible for ensuring the quality of products and processes in my current position as a Quality Engineer.
Conducting quality control tests and inspections on products
Analyzing data to identify areas for improvement
Developing and implementing quality assurance procedures
Collaborating with production teams to address quality issues
Training staff on quality standards and procedures
posted on 30 Apr 2024
posted on 18 Jun 2024
I applied via Recruitment Consulltant
To file GST returns, you need to log in to the GST portal, fill in the required details, and submit the return online.
Log in to the GST portal using your credentials
Select the option to file GST returns
Fill in the details such as sales, purchases, and input tax credit
Verify the details and submit the return online
Make the payment of tax due, if any
posted on 18 Aug 2024
I applied via Company Website and was interviewed in Jul 2024. There was 1 interview round.
I applied via Walk-in
When i facef interview in hotel pal height they selected me and told me for go to cuttack and get market experience from old executive. After ten days of market experience they took a test froom me. After that, they told to meet the Rsm. But the RSM sid no without any interview or any cause.
based on 9 reviews
Rating in categories
Medical Representative
5
salaries
| ₹1.8 L/yr - ₹2.4 L/yr |
Regional Sales Manager
4
salaries
| ₹5.8 L/yr - ₹7 L/yr |
Area Sales Manager
4
salaries
| ₹3.1 L/yr - ₹4.5 L/yr |
HR Executive
3
salaries
| ₹2.2 L/yr - ₹2.8 L/yr |
Area Business Manager
3
salaries
| ₹4.5 L/yr - ₹4.5 L/yr |
Kepler Healthcare
DiTech Process Solutions
Aakash Health Care
Zeiss Pharma