Upload Button Icon Add office photos
Engaged Employer

i

This company page is being actively managed by Cummins Team. If you also belong to the team, you can get access from here

Cummins Verified Tick

Compare button icon Compare button icon Compare

Proud winner of ABECA 2024 - AmbitionBox Employee Choice Awards

zig zag pattern zig zag pattern

Filter interviews by

Cummins Junior Engineer Interview Questions, Process, and Tips

Updated 26 Aug 2024

Top Cummins Junior Engineer Interview Questions and Answers

Cummins Junior Engineer Interview Experiences

3 interviews found

Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(2 Questions)

  • Q1. What is engine 5c
  • Ans. 

    Engine 5c is a type of engine used in certain aircrafts and vehicles.

    • Engine 5c is known for its high performance and efficiency.

    • It is commonly used in military aircrafts and high-speed vehicles.

    • Engine 5c is designed to provide maximum power output while maintaining reliability.

    • Examples of vehicles that may use Engine 5c include fighter jets and sports cars.

  • Answered by AI
  • Q2. What is cycle time,takt time
  • Ans. 

    Cycle time is the total time it takes to complete a process, while takt time is the rate at which a product must be produced to meet customer demand.

    • Cycle time is the total time it takes to complete a process from start to finish.

    • Takt time is the rate at which a product must be produced to meet customer demand.

    • Cycle time can be calculated by dividing the total time taken by the total number of units produced.

    • Takt time ...

  • Answered by AI
Interview experience
5
Excellent
Difficulty level
Easy
Process Duration
-
Result
Selected Selected

I applied via Walk-in and was interviewed in May 2023. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(7 Questions)

  • Q1. Quality control
  • Q2. Total quality control
  • Q3. Refrigeration VCRC system
  • Q4. Vapour absorption system
  • Q5. What is design or design procedure
  • Ans. 

    Design or design procedure refers to the process of creating a plan or blueprint for a product, system, or structure.

    • Design involves identifying requirements and constraints

    • Creating conceptual sketches or models

    • Iteratively refining the design based on feedback

    • Testing and validating the design before implementation

  • Answered by AI
  • Q6. What is design
  • Ans. 

    Design is the process of creating a plan or solution to address a specific problem or need.

    • Design involves identifying requirements and constraints

    • It includes creating sketches, prototypes, and mockups

    • Design considers functionality, aesthetics, usability, and feasibility

    • Examples: architectural design, graphic design, product design

  • Answered by AI
  • Q7. Design for procedure
  • Ans. 

    Designing a procedure involves outlining the steps and requirements for completing a task or achieving a goal.

    • Identify the goal or objective of the procedure

    • Break down the steps needed to achieve the goal

    • Consider any resources or tools required

    • Include any safety precautions or guidelines

    • Review and test the procedure for effectiveness

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - I search a job on fresher
You give me a job

Skills evaluated in this interview

Junior Engineer Interview Questions Asked at Other Companies

asked in Tata Steel
Q1. What is the main role of Junior engineer in Electrical maintenanc ... read more
asked in JSW Steel
Q2. Buchhlz relay, what is relay, what is sensor, you read or not ele ... read more
Q3. If reactor pressure or synthesis pressure increases then how to b ... read more
Q4. What is the thickness of motar used in brickwork (vertical/horizo ... read more
Q5. What is quality,how many types of quality.5s kaizen,gd&t & ... read more
Interview experience
2
Poor
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Aptitude Test 

Absolutely right now I'm in the job opportunity to work from 29th

Round 2 - Coding Test 

Java python git hub c++ c

Interview questions from similar companies

I applied via Walk-in and was interviewed in May 2019. There was 1 interview round.

Interview Questionnaire 

1 Question

  • Q1. I am sharing all questions in advice box..

Interview Preparation Tips

Interview preparation tips for other job seekers - Firstly asked me to tell something about myself.. He had some queried about my responsibilities for my family . After cleared those he asked about my working experience, safety related questions.
After that he started to ask me some questions from design of machine which i could not make him satisfy with my answer
Then he asked about my favourite topic during diploma engineering.. as i said him IC engine, steam engine, heat transfer, pump he started to ask questions from there like what is engine, types, d/f among them , volumetric efficiency, stroke length, compression ratio, turbocharger, pump working principle etc..
I attended those all
After that he gave some info about site environment, and asked to me that i m ok with it or not..
That's it..
Be confident and be honest are the key to crack L&T interview..
Good luck
Thank you

I was interviewed in May 2019.

Interview Questionnaire 

2 Questions

  • Q1. How many types off bricks are uses in construction..
  • Ans. 

    There are several types of bricks used in construction, including clay bricks, concrete bricks, and fire bricks.

    • Clay bricks are the most common type of brick used in construction.

    • Concrete bricks are made from cement, sand, and water and are used for their strength and durability.

    • Fire bricks are designed to withstand high temperatures and are used in fireplaces, ovens, and kilns.

    • Other types of bricks include sand-lime b...

  • Answered by AI
  • Q2. Now can control the many critical conditions on site.

Interview Questionnaire 

1 Question

  • Q1. Hydraulic

Interview Preparation Tips

Interview preparation tips for other job seekers - 1) You must have a knowledge about basic computer course
2) you must have knowledge about your department
3) basic knowledge about instruments
4) confidant about your resume skills
5) you must have technical knowledge about your field
6) clear all queries in college level
7) you must have good communication skills
8) prepared about all that above points before going to interview.
Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(4 Questions)

  • Q1. What is synchronous and histerisis motor
  • Ans. 

    Synchronous motor runs at a constant speed while hysteresis motor has a rotor that follows the rotating magnetic field.

    • Synchronous motor is used in applications where constant speed is required, such as in clocks and timers.

    • Hysteresis motor is used in applications where precise control of speed is required, such as in record players and tape recorders.

    • Synchronous motor has a stator and rotor that rotate at the same spe...

  • Answered by AI
  • Q2. Different between plc and scada
  • Ans. 

    PLC is a hardware device that controls industrial processes, while SCADA is a software system that monitors and controls those processes.

    • PLC is a programmable logic controller that controls the input/output of industrial processes.

    • SCADA is a supervisory control and data acquisition system that collects and analyzes data from the industrial processes.

    • PLC is a hardware device, while SCADA is a software system.

    • PLC is used...

  • Answered by AI
  • Q3. Different between relay and contactor
  • Ans. 

    Relays are used for low power applications while contactors are used for high power applications.

    • Relays are typically used in control circuits to switch low power loads such as lights and fans.

    • Contactors are used to switch high power loads such as motors and compressors.

    • Relays have a lower current rating than contactors.

    • Contactors have larger contacts and can handle higher currents than relays.

    • Relays are typically smal...

  • Answered by AI
  • Q4. Different between switch and relay
  • Ans. 

    Switches are used to control the flow of current in a circuit, while relays are used to switch a circuit on or off.

    • Switches are manually operated, while relays are electrically operated.

    • Switches are used in low voltage applications, while relays are used in high voltage applications.

    • Switches are simple in construction, while relays are more complex.

    • Examples of switches include light switches and toggle switches, while ...

  • Answered by AI
Round 3 - Technical 

(1 Question)

  • Q1. Different between switch and timer
  • Ans. 

    Switch is an electronic component used to connect or disconnect a circuit while a timer is a device used to measure time intervals.

    • Switch is used to turn on/off a device while timer is used to control the duration of a device's operation.

    • Switch is a binary device with two states (on/off) while timer can be analog or digital and can measure time in seconds, minutes, or hours.

    • Examples of switches include light switches, ...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Electrical engineering and electronics engineering

Skills evaluated in this interview

Interview experience
4
Good
Difficulty level
Hard
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Company Website and was interviewed in Dec 2022. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(2 Questions)

  • Q1. Technically about company like safety..
  • Q2. What is 5s and devine
  • Ans. 

    5S is a methodology used to organize and maintain a clean and efficient workplace.

    • 5S stands for Sort, Set in Order, Shine, Standardize, and Sustain.

    • It involves organizing and labeling tools and materials, cleaning and maintaining equipment, and creating a culture of continuous improvement.

    • Example: A factory implementing 5S might label all tools and materials, create a designated storage area for each item, and regularl...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Well i am saying for job seeker. Never give up and try very hardly believe in your self
Interview experience
4
Good
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Company Website and was interviewed in Mar 2024. There was 1 interview round.

Round 1 - HR 

(5 Questions)

  • Q1. Self introduction
  • Ans. I am govindasamy from dharmapuri working maintenance engineer 8years experience
  • Answered Anonymously
  • Q2. Telmi your aditional skills
  • Ans. Plc analysis then all rounder and auditing facilities my improve
  • Answered Anonymously
  • Q3. Why resigning last company
  • Q4. Which type of work your femilear
  • Ans. 

    I am familiar with various types of engineering work, including mechanical, electrical, and civil engineering.

    • Mechanical engineering - designing and analyzing mechanical systems

    • Electrical engineering - working with electrical circuits and systems

    • Civil engineering - designing and constructing infrastructure projects

    • Project management - overseeing and coordinating engineering projects

  • Answered by AI
  • Q5. Why choose those company

Interview Preparation Tips

Interview preparation tips for other job seekers - When you attend the interview my friends please forget nurves after you look friendly then froof your Tallent then automatically comming your torget.🙏
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
2-4 weeks
Result
Selected Selected

I applied via Recruitment Consulltant and was interviewed in Oct 2023. There were 3 interview rounds.

Round 1 - HR 

(1 Question)

  • Q1. Last job salary and experience details.
Round 2 - Technical 

(1 Question)

  • Q1. Job related technical questions like rolling mill, especially drives.
Round 3 - HR 

(1 Question)

  • Q1. Salary negotiation.

Interview Preparation Tips

Interview preparation tips for other job seekers - Specialist on Rolling mill and Drive..

Cummins Interview FAQs

How many rounds are there in Cummins Junior Engineer interview?
Cummins interview process usually has 1-2 rounds. The most common rounds in the Cummins interview process are Technical, Resume Shortlist and Aptitude Test.
What are the top questions asked in Cummins Junior Engineer interview?

Some of the top questions asked at the Cummins Junior Engineer interview -

  1. What is design or design proced...read more
  2. What is desi...read more
  3. What is cycle time,takt t...read more

Tell us how to improve this page.

Cummins Junior Engineer Interview Process

based on 5 interviews

Interview experience

4.4
  
Good
View more
Cummins Junior Engineer Salary
based on 92 salaries
₹1.4 L/yr - ₹9.1 L/yr
63% more than the average Junior Engineer Salary in India
View more details

Cummins Junior Engineer Reviews and Ratings

based on 16 reviews

4.1/5

Rating in categories

4.2

Skill development

4.0

Work-life balance

3.7

Salary

4.4

Job security

4.5

Company culture

3.3

Promotions

3.6

Work satisfaction

Explore 16 Reviews and Ratings
Junior Shop Manager
1.4k salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Junior Manager
833 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Diploma Trainee Engineer
522 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Design Engineer
324 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Service Engineer
289 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Explore more salaries
Compare Cummins with

BHEL

4.1
Compare

TCS

3.7
Compare

Larsen & Toubro Limited

4.0
Compare

Thermax Limited

4.1
Compare
Did you find this page helpful?
Yes No
write
Share an Interview