Upload Button Icon Add office photos

Filter interviews by

Creative Hands HR Consultancy Civil Site Engineer Interview Questions, Process, and Tips

Updated 8 Aug 2023

Creative Hands HR Consultancy Civil Site Engineer Interview Experiences

1 interview found

Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I appeared for an interview in Jul 2023.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Properly align and format text in your resume. A recruiter will have to spend more time reading poorly aligned text, leading to high chances of rejection.
View all tips
Round 2 - Technical 

(5 Questions)

  • Q1. Types of bricks. Types of concrete.
  • Ans. 

    Bricks can be classified as clay bricks, concrete bricks, and fly ash bricks. Concrete can be classified as normal concrete, high-strength concrete, and lightweight concrete.

    • Types of bricks: clay bricks, concrete bricks, fly ash bricks

    • Types of concrete: normal concrete, high-strength concrete, lightweight concrete

  • Answered by AI
  • Q2. 2 Types of bricks.3 Types of concrete.
  • Ans. 

    Bricks: Burnt clay bricks, Fly ash bricks. Concrete: Plain concrete, Reinforced concrete, Prestressed concrete.

    • Bricks: Burnt clay bricks are made by burning clay in a kiln. Fly ash bricks are made from fly ash, lime, and gypsum.

    • Concrete: Plain concrete is a mixture of cement, sand, and aggregate. Reinforced concrete has steel bars embedded in it for added strength. Prestressed concrete is pre-compressed to reduce crack...

  • Answered by AI
  • Q3. Types of foundation andit's used
  • Ans. 

    Types of foundations include shallow, deep, and special foundations, each used based on soil conditions and structural requirements.

    • Shallow foundations: spread footings, mat foundations, strip footings

    • Deep foundations: piles, drilled piers, caissons

    • Special foundations: raft foundations, pile caps, underpinning

    • Used based on soil conditions, building loads, and site constraints

  • Answered by AI
  • Q4. Types of collum and it's used
  • Ans. 

    Types of columns include reinforced concrete columns, steel columns, composite columns, and wooden columns.

    • Reinforced concrete columns are commonly used in building construction for their strength and durability.

    • Steel columns are often used in industrial structures due to their high load-bearing capacity.

    • Composite columns combine materials like steel and concrete for optimal performance.

    • Wooden columns are used in tradi...

  • Answered by AI
  • Q5. Types of slab and it's used
  • Ans. 

    Types of slabs include one-way slab, two-way slab, flat slab, and ribbed slab, each used for different purposes.

    • One-way slab: used for small spans and supported on two opposite sides.

    • Two-way slab: used for larger spans and supported on all four sides.

    • Flat slab: used for heavy loads and provides more flexibility in design.

    • Ribbed slab: used for longer spans and reduces the weight of the slab.

  • Answered by AI

Interview questions from similar companies

I applied via Referral and was interviewed in Jul 2019. There were 4 interview rounds.

Interview Questionnaire 

2 Questions

  • Q1. Tell me about you or work experience?
  • Q2. Can you handle entire team with all documentation work?

Interview Preparation Tips

Interview preparation tips for other job seekers - Always be confident and tell about what you work. Not to be panicked and be calm. Share your experience in any language , not to hesitate for English or others.
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I appeared for an interview in Aug 2024.

Round 1 - Technical 

(2 Questions)

  • Q1. Silo Jumpform process
  • Q2. Concrete ratio

Interview Preparation Tips

Interview preparation tips for other job seekers - Good experience for client job.

Interview Questionnaire 

1 Question

  • Q1. Only Technical related Question and Experience related.
Interview experience
3
Average
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I appeared for an interview before Mar 2024, where I was asked the following questions.

  • Q1. What is your previous experience?
  • Q2. Technical questions

Interview Preparation Tips

Interview preparation tips for other job seekers - Negotiate the salary being offered.
Round 1 - Aptitude Test 

Aptitue test include 180 Question 1 mark each. Apptitude-60
Civil-60
Transportation-60

Round 2 - Technical 

(2 Questions)

  • Q1. What is the superpave parameter for binders?
  • Ans. 

    The superpave parameter for binders is the Performance Grade (PG) of the binder.

    • Superpave is a mix design system for asphalt pavements.

    • Performance Grade (PG) is a binder classification system based on temperature susceptibility.

    • PG is determined by the high and low temperature properties of the binder.

    • For example, PG 64-22 means the binder is suitable for use in areas with maximum pavement temperature of 64°C and minimu

  • Answered by AI
  • Q2. How much camber is provided in Bc road?
  • Ans. 

    The amount of camber provided in BC road varies depending on the road classification and location.

    • Camber is the slope provided on the road surface to ensure proper drainage and prevent water accumulation.

    • The amount of camber provided is determined by the road classification, traffic volume, and location.

    • For example, a rural road may have a camber of 2-3% while an urban road may have a camber of 1-2%.

    • The Ministry of Tra...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Please go through highway geometric design.
Interview experience
2
Poor
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Don’t add your photo or details such as gender, age, and address in your resume. These details do not add any value.
View all tips
Round 2 - Technical 

(2 Questions)

  • Q1. What's your last experience?
  • Q2. Explain Last experience in brief
Round 3 - One-on-one 

(2 Questions)

  • Q1. Explain your problem solving skill?
  • Q2. Give one real past time experience which you have faced on your last job.

I applied via Naukri.com and was interviewed before Jul 2020. There was 1 interview round.

Interview Questionnaire 

1 Question

  • Q1. About previous work experience

Interview Preparation Tips

Interview preparation tips for other job seekers - Be bold and have experience

I applied via Naukri.com and was interviewed in Dec 2020. There were 3 interview rounds.

Interview Questionnaire 

2 Questions

  • Q1. Question regarding my work experience.
  • Q2. Some technical aspects of MS OFFICE, Excel.

Interview Preparation Tips

Interview preparation tips for other job seekers - Interview was quite technicaland they were just enquiring about the technical aspects of the work required. So just prepare the technical parts like MS OFFICE and Excel and also required good typing skills.
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Walk-in and was interviewed in Sep 2023. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Don’t add your photo or details such as gender, age, and address in your resume. These details do not add any value.
View all tips
Round 2 - Aptitude Test 

Questions related basic computer

Round 3 - Typing Test 

(1 Question)

  • Q1. Excel, microsoft office etc.

Interview Preparation Tips

Interview preparation tips for other job seekers - good apporchunity

Creative Hands HR Consultancy Interview FAQs

How many rounds are there in Creative Hands HR Consultancy Civil Site Engineer interview?
Creative Hands HR Consultancy interview process usually has 2 rounds. The most common rounds in the Creative Hands HR Consultancy interview process are Resume Shortlist and Technical.
What are the top questions asked in Creative Hands HR Consultancy Civil Site Engineer interview?

Some of the top questions asked at the Creative Hands HR Consultancy Civil Site Engineer interview -

  1. Types of bricks. Types of concre...read more
  2. 2 Types of bricks.3 Types of concre...read more
  3. Types of collum and it's u...read more

Tell us how to improve this page.

Creative Hands HR Consultancy Civil Site Engineer Interview Process

based on 1 interview

Interview experience

4
  
Good
View more

Interview Questions from Similar Companies

Ven Consulting Interview Questions
3.4
 • 19 Interviews
Hire Glocal Interview Questions
4.7
 • 17 Interviews
Gi Group Interview Questions
3.8
 • 15 Interviews
Xeam Ventures Interview Questions
3.7
 • 12 Interviews
GlobalHunt Interview Questions
3.0
 • 12 Interviews
View all

Creative Hands HR Consultancy Civil Site Engineer Reviews and Ratings

based on 2 reviews

4.5/5

Rating in categories

5.0

Skill development

4.5

Work-life balance

4.1

Salary

4.1

Job security

5.0

Company culture

4.5

Promotions

4.5

Work satisfaction

Explore 2 Reviews and Ratings
HR Recruiter
10 salaries
unlock blur

₹1.5 L/yr - ₹2.8 L/yr

Engineer
6 salaries
unlock blur

₹2 L/yr - ₹5 L/yr

Data Entry Operator
5 salaries
unlock blur

₹3.2 L/yr - ₹6 L/yr

HR Executive Recruiter
5 salaries
unlock blur

₹2 L/yr - ₹3 L/yr

HR Executive
4 salaries
unlock blur

₹1.1 L/yr - ₹2 L/yr

Explore more salaries
Compare Creative Hands HR Consultancy with

Vision India Services

3.7
Compare

Gi Group

3.8
Compare

Ven Consulting

3.5
Compare

Verifacts Services

3.5
Compare
Did you find this page helpful?
Yes No
write
Share an Interview