Upload Button Icon Add office photos

Filter interviews by

COMSTAR AUTOMOTIVE TECHNOLOGIES Senior Engineer Interview Questions and Answers

Updated 15 Jan 2022

COMSTAR AUTOMOTIVE TECHNOLOGIES Senior Engineer Interview Experiences

2 interviews found

I applied via Referral and was interviewed in Jul 2021. There were 4 interview rounds.

Interview Questionnaire 

1 Question

  • Q1. DFMEA and Electrical

Interview Preparation Tips

Interview preparation tips for other job seekers - We need to technically strong in our core area

I applied via Naukri.com and was interviewed in Dec 2020. There was 1 interview round.

Interview Questionnaire 

1 Question

  • Q1. Electrical related

Interview Preparation Tips

Interview preparation tips for other job seekers - Good

Senior Engineer Interview Questions Asked at Other Companies

Q1. what is the meaning of M in M20,M25,M30 grade of concrete?
asked in Nagarro
Q2. Write a program: two input, one is N(any integer, lets say 3), se ... read more
asked in Tata Elxsi
Q3. What is Quality Assurance. Difference between Quality assurance a ... read more
Q4. Is it possible to work with multiple threads in core data? If so, ... read more
Q5. When you will perform Half or Full engine overhauling.

Interview questions from similar companies

I applied via Recruitment Consultant and was interviewed in Nov 2018. There were 3 interview rounds.

Interview Questionnaire 

3 Questions

  • Q1. Basic introduction questions were putted from HR side were as the first technical round was easy were question related to your daily work management and key responsibilities were asked.
  • Q2. Being a production engineer some basic questions related to manufacturing standards were asked.
  • Q3. Question related to Job description and KRA were asked

Interview Preparation Tips

General Tips: For production engineers just focus on ISO STANDARDS ,EMS,OHSAS,IATF 16949:2016 and IMS related questions...
Skills: Technical Skill, Communication And Confidence, Body Language, Problem Solving, Decision Making Skills
Duration: <1 week

I applied via Recruitment Consultant and was interviewed before Dec 2018. There were 3 interview rounds.

Interview Questionnaire 

11 Questions

  • Q1. Phase in APQP, when submit PPAP
  • Ans. 

    PPAP submission is the final phase of APQP.

    • PPAP submission is the final step in the APQP process.

    • It involves submitting a Production Part Approval Process (PPAP) to the customer.

    • PPAP includes documentation and samples that demonstrate the product meets customer requirements.

    • PPAP submission is necessary before production can begin.

    • PPAP submission is a critical step in ensuring product quality and customer satisfaction.

  • Answered by AI
  • Q2. Five phase in APQP, PPAP is submitted in 4th phase
  • Ans. 

    APQP consists of five phases, with PPAP being submitted in the fourth phase.

    • APQP stands for Advanced Product Quality Planning.

    • The five phases of APQP are: Planning and Program Definition, Product Design and Development, Process Design and Development, Product and Process Validation, and Launch, Feedback, Assessment, and Corrective Action.

    • PPAP stands for Production Part Approval Process.

    • PPAP is submitted in the fourth p...

  • Answered by AI
  • Q3. How to make PPT
  • Ans. 

    To make a PPT, use a software like PowerPoint or Google Slides and follow a structure with clear and concise content.

    • Choose a template or create your own design

    • Add relevant and visually appealing images

    • Use bullet points and short sentences

    • Practice your presentation before presenting

    • Include a conclusion and call to action

  • Answered by AI
  • Q4. How to do process audit
  • Ans. 

    Process audit involves reviewing and evaluating a company's procedures and policies to ensure they are effective and efficient.

    • Identify the process to be audited

    • Define the audit objectives and scope

    • Select the audit team and assign roles

    • Gather and analyze data

    • Identify areas for improvement

    • Develop and implement corrective actions

    • Monitor and follow up on corrective actions

    • Document the audit findings and recommendations

  • Answered by AI
  • Q5. As per control plan
  • Q6. What you do when a customer complaint
  • Ans. 

    When a customer complaint arises, I listen attentively, empathize with their concerns, investigate the issue, propose a solution, and follow up to ensure satisfaction.

    • Listen attentively to the customer's complaint

    • Empathize with their concerns and show understanding

    • Investigate the issue by gathering relevant information

    • Propose a solution or offer alternatives to address the complaint

    • Follow up with the customer to ensure

  • Answered by AI
  • Q7. First I will take entrim action as well as I inform to my team & related department via mail or by face.
  • Q8. How
  • Ans. 

    Can you please clarify the question?

    • I'm sorry, I don't understand what you're asking.

    • Could you please rephrase the question?

    • I need more information to answer that question.

  • Answered by AI
  • Q9. First I depute someone at customer line then customer store, then warehouse if any, then our FG, then WIP & store if problem related to BOP part
  • Q10. How & when to develop gauge & fixture during NPD
  • Ans. 

    Gauges and fixtures should be developed during the design phase of NPD to ensure quality and efficiency.

    • Identify critical dimensions and tolerances early on

    • Develop gauges and fixtures to measure and verify these dimensions

    • Test and refine gauges and fixtures throughout the design process

    • Ensure gauges and fixtures are compatible with manufacturing processes

    • Finalize gauges and fixtures before production begins

  • Answered by AI
  • Q11. During 2nd phase, first I identify gauge or fixture required for which station, if there is inhouse facility then fix meeting for understanding concept to toolroom if not possible to meke inhouse than cal...

Interview Preparation Tips

Interview preparation tips for other job seekers - Dressing sence- Wear neat & clean & well ironed formal shirt not dark colour & formal shoes.
Clean Nails or cutted properly.
Reach at interview sight 10 to 15 minutes before scheduled time.
Eye contact.
No any hesitation.
Switch off your mobile etc

I applied via Recruitment Consulltant and was interviewed in Jun 2022. There were 4 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - One-on-one 

(2 Questions)

  • Q1. Technical knowledge about area
  • Q2. English is required as fluent
Round 3 - Aptitude Test 

Question abou TPM, OEE, six Sigma, lean manufacturing,kaizen,poka yoke etc

Round 4 - HR 

(1 Question)

  • Q1. No sales discuss the directly give you ofer with hike of 30-40%

Interview Preparation Tips

Interview preparation tips for other job seekers - Be fluent in English
Be confident
Share only you know very well.
Short but exactly answers the required in interview stories are no one like
Interview experience
2
Poor
Difficulty level
Easy
Process Duration
2-4 weeks
Result
Selected Selected

I applied via Naukri.com and was interviewed in Apr 2023. There were 3 interview rounds.

Round 1 - HR 

(2 Questions)

  • Q1. Tell me more about yourself
  • Ans. 

    I am a Quality Engineer with experience in ensuring product quality and implementing quality control processes.

    • Experienced in conducting quality audits and inspections

    • Proficient in using quality tools and techniques such as Six Sigma and Lean

    • Skilled in analyzing data and identifying areas for improvement

    • Strong knowledge of quality standards and regulations

    • Effective communicator and collaborator in cross-functional team

  • Answered by AI
  • Q2. What have you done
  • Ans. 

    As a Quality Engineer, I have implemented various quality control measures and conducted audits to ensure product compliance.

    • Implemented quality control processes to monitor and improve product quality

    • Conducted audits to identify non-conformities and implement corrective actions

    • Collaborated with cross-functional teams to develop and implement quality standards

    • Performed root cause analysis and implemented preventive mea...

  • Answered by AI
Round 2 - Technical 

(1 Question)

  • Q1. Least count of micrometre
  • Ans. 

    The least count of a micrometer is the smallest measurement that can be read on the scale.

    • The least count of a micrometer is determined by the number of divisions on the scale and the pitch of the screw.

    • For example, a micrometer with 50 divisions on the scale and a pitch of 0.5 mm would have a least count of 0.01 mm.

    • The least count is important for accurate measurements and should be taken into consideration when using

  • Answered by AI
Round 3 - Technical 

(1 Question)

  • Q1. What is Quality control function
  • Ans. 

    Quality control function involves monitoring and testing products to ensure they meet the required standards.

    • Quality control function involves inspecting products to ensure they meet the required specifications

    • It involves testing products to ensure they function as intended

    • It involves monitoring the production process to identify and correct any defects

    • Examples include checking the weight and dimensions of a product, t...

  • Answered by AI
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
2-4 weeks
Result
Selected Selected

I applied via Job Portal and was interviewed in May 2023. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Don’t add your photo or details such as gender, age, and address in your resume. These details do not add any value.
View all tips
Round 2 - Group Discussion 

About your qualification and knowledge.

Round 3 - Technical 

(3 Questions)

  • Q1. Talk about your resume showin the experience.
  • Q2. Tell me about yourself and general .
  • Q3. Knowledge of experience

Interview Preparation Tips

Interview preparation tips for other job seekers - Fully confident about your resume.
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Naukri.com and was interviewed before Aug 2022. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(1 Question)

  • Q1. 7Qc Tools 8D X- Bar Chart Casting And Machining Defects About Your Self Difference Bt Accuracy and Precision About Gd&T Role And Responsibility Of Your Current Company
Round 3 - HR 

(1 Question)

  • Q1. Why You Want to Join This Company And Last One Is How Much You Expected Ctc
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
2-4 weeks
Result
Selected Selected

I applied via Naukri.com and was interviewed in Aug 2023. There were 4 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Properly align and format text in your resume. A recruiter will have to spend more time reading poorly aligned text, leading to high chances of rejection.
View all tips
Round 2 - HR 

(3 Questions)

  • Q1. Tell me about yourself?
  • Q2. Why do we hire you?
  • Q3. What salary did you expect
Round 3 - Technical 

(3 Questions)

  • Q1. Tell me about your job profile? Roles Responsibilities.
  • Q2. Tell be about manufacturing process which you have been seen in your career
  • Q3. What are core tools of AIAG?
  • Ans. 

    Core tools of AIAG include FMEA, PPAP, MSA, SPC, and APQP.

    • FMEA (Failure Mode and Effects Analysis) is used to identify and prioritize potential failure modes in a process.

    • PPAP (Production Part Approval Process) is used to ensure that suppliers meet customer requirements.

    • MSA (Measurement Systems Analysis) is used to assess the quality of measurement systems.

    • SPC (Statistical Process Control) is used to monitor and contro...

  • Answered by AI
Round 4 - Technical 

(3 Questions)

  • Q1. What are yours failures?
  • Ans. 

    I have experienced failures in project deadlines, communication, and technical solutions.

    • Missed project deadlines due to underestimating tasks

    • Miscommunication with team members leading to misunderstandings

    • Implemented technical solutions that did not meet requirements

  • Answered by AI
  • Q2. What are your achievements?
  • Q3. What is heat treatment process
  • Ans. 

    Heat treatment process is a method used to alter the physical and sometimes chemical properties of a material through heating and cooling.

    • Involves heating the material to a specific temperature

    • Holding it at that temperature for a set amount of time

    • Then cooling it at a controlled rate

    • Can be used to increase hardness, improve machinability, or enhance other properties

    • Common techniques include annealing, quenching, temper

  • Answered by AI

I applied via Naukri.com and was interviewed in Dec 2021. There was 1 interview round.

Interview Questionnaire 

3 Questions

  • Q1. Self introduction for experience.
  • Q2. Quality control
  • Q3. Bharat gears limited Mumbai

Interview Preparation Tips

Interview preparation tips for other job seekers - While it's not necessary unethical to become informed of interview question it is not advantageous and actually interview.

COMSTAR AUTOMOTIVE TECHNOLOGIES Interview FAQs

How to prepare for COMSTAR AUTOMOTIVE TECHNOLOGIES Senior Engineer interview?
Go through your CV in detail and study all the technologies mentioned in your CV. Prepare at least two technologies or languages in depth if you are appearing for a technical interview at COMSTAR AUTOMOTIVE TECHNOLOGIES. The most common topics and skills that interviewers at COMSTAR AUTOMOTIVE TECHNOLOGIES expect are Active Directory, Apqp, AutoCAD, Circuit Designing and Concept Design.
What are the top questions asked in COMSTAR AUTOMOTIVE TECHNOLOGIES Senior Engineer interview?

Some of the top questions asked at the COMSTAR AUTOMOTIVE TECHNOLOGIES Senior Engineer interview -

  1. Electrical rela...read more
  2. DFMEA and Electri...read more

Tell us how to improve this page.

COMSTAR AUTOMOTIVE TECHNOLOGIES Senior Engineer Salary
based on 86 salaries
₹4.5 L/yr - ₹10.2 L/yr
14% less than the average Senior Engineer Salary in India
View more details

COMSTAR AUTOMOTIVE TECHNOLOGIES Senior Engineer Reviews and Ratings

based on 11 reviews

4.0/5

Rating in categories

4.4

Skill development

4.5

Work-life balance

4.7

Salary

4.6

Job security

4.8

Company culture

4.6

Promotions

4.6

Work satisfaction

Explore 11 Reviews and Ratings
Senior Engineer
86 salaries
unlock blur

₹4.5 L/yr - ₹10.2 L/yr

Assistant Manager
51 salaries
unlock blur

₹6.5 L/yr - ₹16 L/yr

Engineer
38 salaries
unlock blur

₹3.1 L/yr - ₹8.2 L/yr

Trainee
32 salaries
unlock blur

₹1 L/yr - ₹2.5 L/yr

Junior Engineer
22 salaries
unlock blur

₹3 L/yr - ₹6.8 L/yr

Explore more salaries
Compare COMSTAR AUTOMOTIVE TECHNOLOGIES with

ZF Steering Gear

3.7
Compare

Ag Industries

4.0
Compare

Caparo Engineering India

4.0
Compare

Shivam Autotech

3.6
Compare
Did you find this page helpful?
Yes No
write
Share an Interview