Upload Button Icon Add office photos

Cochin Shipyard

Compare button icon Compare button icon Compare

Filter interviews by

Cochin Shipyard Interview Questions, Process, and Tips

Updated 28 Nov 2024

Top Cochin Shipyard Interview Questions and Answers

View all 10 questions

Cochin Shipyard Interview Experiences

Popular Designations

12 interviews found

Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
-
Result
Not Selected

I applied via Referral

Round 1 - Tsa 

(2 Questions)

  • Q1. Tsa painting Profession
  • Q2. Tsa painting Sunblasting standard
  • Ans. 

    TSA painting and sunblasting standards refer to the specific guidelines and procedures for applying TSA coating and conducting surface preparation through sunblasting.

    • TSA painting involves applying a thermal spray aluminum coating to protect against corrosion in harsh environments.

    • Sunblasting is a surface preparation method using high-pressure abrasive materials to clean and roughen the surface before painting.

    • Both pro...

  • Answered by AI
Round 2 - Hydro blasting 

(2 Questions)

  • Q1. Blasting standard
  • Q2. Blasting procedure
  • Ans. 

    The blasting procedure involves using high-pressure air or water to propel abrasive materials onto a surface to remove contaminants and prepare it for painting.

    • Ensure proper safety measures are in place, such as wearing protective gear and setting up blast curtains.

    • Select the appropriate abrasive material based on the surface material and desired finish.

    • Adjust the pressure and angle of the blasting nozzle to achieve th...

  • Answered by AI
Round 3 - Painting 

(2 Questions)

  • Q1. Painting procedure
  • Q2. Painting standard
Round 4 - See water tank 

(2 Questions)

  • Q1. Tank cleaning Procedure
  • Ans. 

    Tank cleaning procedure involves thorough cleaning of the tank interior to remove any residue or contaminants.

    • Ensure all equipment and tools are properly cleaned and sanitized before use

    • Use appropriate cleaning agents and techniques based on the type of residue or contaminants present

    • Inspect the tank interior before and after cleaning to ensure all residue is removed

    • Follow safety protocols and wear appropriate protecti

  • Answered by AI
  • Q2. Treatment Good Assemb
Round 5 - CVG twinkman plant 

(2 Questions)

  • Q1. CVG treatment plant cleaning
  • Q2. Good knowledge treatment plant
Round 6 - Hold sip safe forward 

(2 Questions)

  • Q1. Hold work good knowledge
  • Q2. Hull blasting and painting
Round 7 - Duck and zip side 

(2 Questions)

  • Q1. 100% work knowledge
  • Q2. Good communication also
Round 8 - Popular boffinian cleaning 

(2 Questions)

  • Q1. Good condition cleaning and Buffy
  • Q2. No comments 100% work knowledge
Round 9 - Ship work under percent A2Z 

(2 Questions)

  • Q1. First water tank diesel tank balance tank fuel tank CV G tank
  • Q2. Hull sipseyed forward Bridget
Round 10 - Ship work cheap and fast 

(2 Questions)

  • Q1. My work more progress little man Power Good quality Clint happy
  • Q2. Safety first part of the job

Interview Preparation Tips

Interview preparation tips for other job seekers - Safety first part of the job market and

Blasting and Painting Supervisor Interview Questions asked at other Companies

Q1. Tsa painting Sunblasting standard
View answer (1)

Sopra Steria

Success to our employee's well-being? A work-life balance that's simply unbeatable.

Our employees have rated us 4 for Work-Life Balance on AmbitionBox

Interview Questions & Answers

user image Anonymous

posted on 19 Sep 2023

Interview experience
3
Average
Difficulty level
-
Process Duration
2-4 weeks
Result
-
Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Properly align and format text in your resume. A recruiter will have to spend more time reading poorly aligned text, leading to high chances of rejection.
View all Resume tips
Round 2 - Technical 

(2 Questions)

  • Q1. Electrical machine and electrical motor
  • Q2. Transformers and strater

Interview Preparation Tips

Interview preparation tips for other job seekers - Extra career improve
Cochin Shipyard Interview Questions and Answers for Freshers
illustration image
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
2-4 weeks
Result
Selected Selected

I applied via Company Website and was interviewed in Mar 2023. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Don’t add your photo or details such as gender, age, and address in your resume. These details do not add any value.
View all Resume tips
Round 2 - Technical 

(1 Question)

  • Q1. Objectives type test
Round 3 - Technical 

(1 Question)

  • Q1. Description test

Interview Preparation Tips

Interview preparation tips for other job seekers - Objective and description test

Junior Technical Assistant Interview Questions asked at other Companies

Q1. How many senser in fbp
View answer (1)
Interview experience
1
Bad
Difficulty level
Moderate
Process Duration
More than 8 weeks
Result
Selected Selected

I applied via Company Website and was interviewed before Jan 2023. There were 2 interview rounds.

Round 1 - Technical 

(1 Question)

  • Q1. Multiple Choice Questions
Round 2 - Technical 

(3 Questions)

  • Q1. Store related technical
  • Q2. SAP Related questions
  • Q3. 5S Related questions

Store Incharge Interview Questions asked at other Companies

Q1. if material purchase in party but some material in liquid and some has been expiared how would have in this case?
View answer (4)

Cochin Shipyard interview questions for popular designations

 Electrical Technician

 (2)

 Junior Technical Assistant

 (1)

 Welder TIG and ARC

 (1)

 Senior Project Officer

 (1)

 Safety Officer

 (1)

 Fireman

 (1)

 Store Incharge

 (1)

 Blasting and Painting Supervisor

 (1)

Round 1 - Technical 

(5 Questions)

  • Q1. Work experience . Which field you studied
  • Q2. How many years of experience you have
  • Q3. Now what is your position
  • Q4. What is your ambition
  • Q5. Which year you passed your course

Interview Preparation Tips

Interview preparation tips for other job seekers - Online interview on th e last week of march now I'm searching for an job

Electrical Technician Interview Questions asked at other Companies

Q1. Preventive Maintenance of All Kinds of H.V & LV Breakers, Motors, Voltage Up To 33 KV & 11 KV & 6.6.KV /2400 KW ,Transformer(15.75KV /230 KV ), Corrective Maintenance of HV/MV /LV Switches gears,VCB,ACB,MOCB,SF6 Breakers, Breake... read more
View answer (4)

Senior Project Officer Interview Questions & Answers

user image ABIR LAL BHATTACHARYYA

posted on 15 Dec 2021

I applied via Company Website

Interview Questionnaire 

3 Questions

  • Q1. Power point presentation tell me about your self ?
  • Q2. Technical Experience & achievement past jobs
  • Q3. Power point presentation resume - 10 slides

Interview Preparation Tips

Interview preparation tips for other job seekers - Technical job experience related .

Senior Project Officer Interview Questions asked at other Companies

Q1. Introduction Problems of rural sector
View answer (1)

I applied via Campus Placement and was interviewed before Jun 2021. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all Resume tips
Round 2 - Technical 

(5 Questions)

  • Q1. Which equetmens identy fei
  • Q2. Hammer chipping hammmer
  • Q3. Is tig welding celity
  • Ans. 

    TIG welding is a high-quality welding process that produces clean and precise welds.

    • TIG welding uses a non-consumable tungsten electrode to create the arc and melt the metal.

    • It requires a high level of skill and precision to control the heat and produce a clean weld.

    • TIG welding is commonly used for welding thin materials, such as aluminum and stainless steel.

    • It produces a high-quality weld with minimal spatter and dist...

  • Answered by AI
  • Q4. Which reference to the figure what are the values of the angles shown as and while depositing fusion runs with fillet
  • Q5. Which weld defect occurs on the joint due to less flow rate fo shielding argon gas
  • Ans. 

    Incomplete penetration is the weld defect that occurs on the joint due to less flow rate of shielding argon gas.

    • Incomplete penetration occurs when the weld metal does not penetrate through the joint completely.

    • This can lead to weak and unreliable welds.

    • It can be caused by insufficient shielding gas flow rate, improper welding technique, or incorrect welding parameters.

    • Examples of incomplete penetration include lack of ...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Saveng s your time
Is fast welding

Welder TIG and ARC Interview Questions asked at other Companies

Q1. Which welding types Ans T,joints But,joints Iab,joints Cornar,joints Aej,joints Top to botam and botam to top
View answer (2)

Interview Questionnaire 

2 Questions

  • Q1. Why you joining this and previous which field and QC and planning knowledge planning any tendering process knowledge...such type
  • Q2. How many cube filling as Is code IS 456 and removing shuttering details ?
  • Ans. 

    I'm sorry, but the question is unclear and seems to be incomplete.

    • The question lacks context and details.

    • It is unclear what is being asked.

    • Please provide more information or rephrase the question.

    • Without additional information, it is impossible to answer the question.

  • Answered by AI

Project Officer Interview Questions asked at other Companies

Q1. Power Tester working and uses.
View answer (4)

Fireman Interview Questions & Answers

user image Anonymous

posted on 19 Feb 2021

I applied via Naukri.com and was interviewed in Jan 2021. There were 3 interview rounds.

Interview Questionnaire 

2 Questions

  • Q1. Why acetylene cylenders always keep in upright position?
  • Ans. 

    Acetylene cylinders are kept in an upright position to prevent the acetone inside from leaking.

    • Keeping acetylene cylinders upright prevents the acetone from coming into contact with the porous material inside the cylinder.

    • Acetone is used as a solvent to stabilize acetylene gas, and it is stored in a porous material to prevent the gas from becoming unstable.

    • If the cylinder is not kept upright, the acetone can leak out, ...

  • Answered by AI
  • Q2. How far away should you stand when you are using a fire extinguisher to put out a fire?
  • Ans. 

    Stand 6-8 feet away from the fire when using a fire extinguisher.

    • Maintain a safe distance of 6-8 feet from the fire.

    • Position yourself with an escape route behind you.

    • Aim the extinguisher at the base of the fire.

    • Sweep the extinguisher from side to side until the fire is out.

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Be honest and think quickly
Speak clearly and maintain eye contact with interviewer.
Express yourself in a positive manner.

Fireman Interview Questions asked at other Companies

Q1. What is down comer ? 2 any one point of the foam extinguisher is not drive? 3 what is the fire point.? 4 what is the flash point? 5 Co2 extinguisher throw away is fire what is explosive .6 Classification of fire
View answer (2)

Interview Questions & Answers

user image Anonymous

posted on 22 Apr 2021

I applied via Company Website and was interviewed in Oct 2020. There were 5 interview rounds.

Interview Questionnaire 

2 Questions

  • Q1. First they will conduct an objective type test which contain discipline related (60marks), gk & pcm(20 marks each) .The candidates clearing this test will be selected for certificate verification .After th...
  • Q2. They will ask so many questions.

Interview Preparation Tips

Interview preparation tips for other job seekers - Should have a strong base about your trade/discipline.
Contribute & help others!
anonymous
You can choose to be anonymous

Cochin Shipyard Interview FAQs

How many rounds are there in Cochin Shipyard interview?
Cochin Shipyard interview process usually has 3-4 rounds. The most common rounds in the Cochin Shipyard interview process are Technical, Resume Shortlist and Aptitude Test.
What are the top questions asked in Cochin Shipyard interview?

Some of the top questions asked at the Cochin Shipyard interview -

  1. How much hazard you identify in confined space like toxic and flammable gases??...read more
  2. How far away should you stand when you are using a fire extinguisher to put ou...read more
  3. Why we can use elcb and how much mA we use for current or sho...read more

Recently Viewed

PHOTOS

InsuranceDekho

3 office photos

LIST OF COMPANIES

Credit Bajaar

Overview

SALARIES

Bharat Sanchar Nigam

No Salaries

PHOTOS

United India Insurance Company

No Photos

REVIEWS

Hindustan Petroleum

No Reviews

REVIEWS

Government of Andhra Pradesh

No Reviews

JOBS

United India Insurance Company

No Jobs

COMPANY BENEFITS

Government of Maharashtra

No Benefits

SALARIES

Government of Maharashtra

No Salaries

REVIEWS

Hindustan Petroleum

No Reviews

Tell us how to improve this page.

Cochin Shipyard Interview Process

based on 7 interviews

Interview experience

4.3
  
Good
View more

HCLTech

A more secure future awaits you

Cochin Shipyard Reviews and Ratings

based on 225 reviews

4.2/5

Rating in categories

4.1

Skill development

3.8

Work-life balance

3.8

Salary

3.8

Job security

4.0

Company culture

3.4

Promotions

3.9

Work satisfaction

Explore 225 Reviews and Ratings
Project Officer
89 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Supervisor
31 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Project Assistant
30 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Safety Officer
24 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Deputy Manager
17 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Explore more salaries
Compare Cochin Shipyard with

Garden Reach Shipbuilders & Engineers

4.2
Compare

Mazagon Dock

4.4
Compare

Bharati Defence and Infrastructure

3.9
Compare

ABG Shipyard

4.7
Compare
Did you find this page helpful?
Yes No
write
Share an Interview